- [email protected] 2003/11/21 11:57:03

     [everything]
     unexpand and delete whitespace at EOL; ok markus@
     (done locally and RCS IDs synced)

CREDITS

@@ -1,6 +1,6 @@
 Tatu Ylonen <[email protected]> - Creator of SSH
 
-Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, 
+Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
 Theo de Raadt, and Dug Song - Creators of OpenSSH
 
 Alain St-Denis <[email protected]> - Irix fix
@@ -94,5 +94,5 @@ Apologies to anyone I have missed.
 
 Damien Miller <[email protected]>
 
-$Id: CREDITS,v 1.74 2003/09/07 02:34:54 dtucker Exp $
+$Id: CREDITS,v 1.75 2003/11/21 12:48:55 djm Exp $
 

ChangeLog

@@ -3,6 +3,10 @@
    - [email protected] 2003/11/20 11:39:28
      [progressmeter.c]
      fix rounding errors; from andreas@
+   - [email protected] 2003/11/21 11:57:03
+     [everything]
+     unexpand and delete whitespace at EOL; ok markus@
+     (done locally and RCS IDs synced)
 
 20031118
  - (djm) Fix early exit for root auth success when UsePAM=yes and 
@@ -1494,4 +1498,4 @@
  - Fix sshd BindAddress and -b options for systems using fake-getaddrinfo.
    Report from [email protected], diagnosis from [email protected]
 
-$Id: ChangeLog,v 1.3118 2003/11/21 12:09:10 djm Exp $
+$Id: ChangeLog,v 1.3119 2003/11/21 12:48:55 djm Exp $

INSTALL

@@ -4,21 +4,21 @@
 You will need working installations of Zlib and OpenSSL.
 
 Zlib 1.1.4 or greater:
-http://www.gzip.org/zlib/ 
+http://www.gzip.org/zlib/
 
 OpenSSL 0.9.6 or greater:
 http://www.openssl.org/
 
-(OpenSSL 0.9.5a is partially supported, but some ciphers (SSH protocol 1 
+(OpenSSL 0.9.5a is partially supported, but some ciphers (SSH protocol 1
 Blowfish) do not work correctly.)
 
 OpenSSH can utilise Pluggable Authentication Modules (PAM) if your system
 supports it. PAM is standard on Redhat and Debian Linux, Solaris and
 HP-UX 11.
 
-NB. If you operating system supports /dev/random, you should configure 
-OpenSSL to use it. OpenSSH relies on OpenSSL's direct support of 
-/dev/random. If you don't you will have to rely on ssh-rand-helper, which 
+NB. If you operating system supports /dev/random, you should configure
+OpenSSL to use it. OpenSSH relies on OpenSSL's direct support of
+/dev/random. If you don't you will have to rely on ssh-rand-helper, which
 is inferior to a good kernel-based solution.
 
 PAM:
@@ -37,7 +37,7 @@ http://www.jmknoble.net/software/x11-ssh-askpass/
 
 PRNGD:
 
-If your system lacks Kernel based random collection, the use of Lutz 
+If your system lacks Kernel based random collection, the use of Lutz
 Jaenicke's PRNGd is recommended.
 
 http://www.aet.tu-cottbus.de/personen/jaenicke/postfix_tls/prngd.html
@@ -54,7 +54,7 @@ http://www.sparc.spb.su/solaris/skey/
 
 If you wish to use --with-skey then you will need the above library
 installed.  No other current S/Key library is currently known to be
-supported. 
+supported.
 
 2. Building / Installation
 --------------------------
@@ -73,7 +73,7 @@ installation prefix, use the --prefix option to configure:
 make
 make install
 
-Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override 
+Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override
 specific paths, for example:
 
 ./configure --prefix=/opt --sysconfdir=/etc/ssh
@@ -104,26 +104,26 @@ There are a few other options to the configure script:
 --with-pam enables PAM support. If PAM support is compiled in, it must
 also be enabled in sshd_config (refer to the UsePAM directive).
 
---with-prngd-socket=/some/file allows you to enable EGD or PRNGD 
-support and to specify a PRNGd socket. Use this if your Unix lacks 
-/dev/random and you don't want to use OpenSSH's builtin entropy 
+--with-prngd-socket=/some/file allows you to enable EGD or PRNGD
+support and to specify a PRNGd socket. Use this if your Unix lacks
+/dev/random and you don't want to use OpenSSH's builtin entropy
 collection support.
 
---with-prngd-port=portnum allows you to enable EGD or PRNGD support 
-and to specify a EGD localhost TCP port. Use this if your Unix lacks 
-/dev/random and you don't want to use OpenSSH's builtin entropy 
+--with-prngd-port=portnum allows you to enable EGD or PRNGD support
+and to specify a EGD localhost TCP port. Use this if your Unix lacks
+/dev/random and you don't want to use OpenSSH's builtin entropy
 collection support.
 
---with-lastlog=FILE will specify the location of the lastlog file. 
+--with-lastlog=FILE will specify the location of the lastlog file.
 ./configure searches a few locations for lastlog, but may not find
 it if lastlog is installed in a different place.
 
 --without-lastlog will disable lastlog support entirely.
 
---with-osfsia, --without-osfsia will enable or disable OSF1's Security 
+--with-osfsia, --without-osfsia will enable or disable OSF1's Security
 Integration Architecture.  The default for OSF1 machines is enable.
 
---with-skey=PATH will enable S/Key one time password support. You will 
+--with-skey=PATH will enable S/Key one time password support. You will
 need the S/Key libraries and header files installed for this to work.
 
 --with-tcp-wrappers will enable TCP Wrappers (/etc/hosts.allow|deny)
@@ -134,12 +134,12 @@ if your operating system uses MD5 passwords and the system crypt() does
 not support them directly (see the crypt(3/3c) man page). If enabled, the
 resulting binary will support both MD5 and traditional crypt passwords.
 
---with-utmpx enables utmpx support. utmpx support is automatic for 
+--with-utmpx enables utmpx support. utmpx support is automatic for
 some platforms.
 
 --without-shadow disables shadow password support.
 
---with-ipaddr-display forces the use of a numeric IP address in the 
+--with-ipaddr-display forces the use of a numeric IP address in the
 $DISPLAY environment variable. Some broken systems need this.
 
 --with-default-path=PATH allows you to specify a default $PATH for sessions
@@ -169,35 +169,35 @@ CFLAGS="-O -m486" LDFLAGS="-s" LIBS="-lrubbish" LD="/usr/foo/ld" ./configure
 3. Configuration
 ----------------
 
-The runtime configuration files are installed by in ${prefix}/etc or 
+The runtime configuration files are installed by in ${prefix}/etc or
 whatever you specified as your --sysconfdir (/usr/local/etc by default).
 
-The default configuration should be instantly usable, though you should 
+The default configuration should be instantly usable, though you should
 review it to ensure that it matches your security requirements.
 
 To generate a host key, run "make host-key". Alternately you can do so
-manually using the following commands: 
+manually using the following commands:
 
     ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ""
     ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ""
     ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ""
 
 Replacing /etc/ssh with the correct path to the configuration directory.
-(${prefix}/etc or whatever you specified with --sysconfdir during 
+(${prefix}/etc or whatever you specified with --sysconfdir during
 configuration)
 
 If you have configured OpenSSH with EGD support, ensure that EGD is
 running and has collected some Entropy.
 
-For more information on configuration, please refer to the manual pages 
+For more information on configuration, please refer to the manual pages
 for sshd, ssh and ssh-agent.
 
 4. Problems?
 ------------
 
-If you experience problems compiling, installing or running OpenSSH. 
+If you experience problems compiling, installing or running OpenSSH.
 Please refer to the "reporting bugs" section of the webpage at
 http://www.openssh.com/
 
 
-$Id: INSTALL,v 1.62 2003/10/21 02:41:14 dtucker Exp $
+$Id: INSTALL,v 1.63 2003/11/21 12:48:55 djm Exp $

LICENCE

@@ -45,16 +45,16 @@ OpenSSH contains no GPL code.
     software are publicly available on the Internet and at any major
     bookstore, scientific library, and patent office worldwide.  More
     information can be found e.g. at "http://www.cs.hut.fi/crypto".
-    
+
     The legal status of this program is some combination of all these
     permissions and restrictions.  Use only at your own responsibility.
     You will be responsible for any legal consequences yourself; I am not
     making any claims whether possessing or using this is legal or not in
     your country, and I am not taking any responsibility on your behalf.
-    
-    
-    			    NO WARRANTY
-    
+
+
+			    NO WARRANTY
+
     BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
     FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
     OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
@@ -64,7 +64,7 @@ OpenSSH contains no GPL code.
     TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
     PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
     REPAIR OR CORRECTION.
-    
+
     IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
     WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
     REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
@@ -112,15 +112,15 @@ OpenSSH contains no GPL code.
     with the following license:
 
      * @version 3.0 (December 2000)
-     * 
+     *
      * Optimised ANSI C code for the Rijndael cipher (now AES)
-     * 
+     *
      * @author Vincent Rijmen <[email protected]>
      * @author Antoon Bosselaers <[email protected]>
      * @author Paulo Barreto <[email protected]>
-     * 
+     *
      * This code is hereby placed in the public domain.
-     * 
+     *
      * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS
      * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
      * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
@@ -183,7 +183,7 @@ OpenSSH contains no GPL code.
 	Nils Nordman
 	Simon Wilkinson
 
-    Portable OpenSSH additionally includes code from the following copyright 
+    Portable OpenSSH additionally includes code from the following copyright
     holders, also under the 2-term BSD license:
 
 	Ben Lindstrom
@@ -229,24 +229,24 @@ OpenSSH contains no GPL code.
     a) md5crypt.c, md5crypt.h
 
 	 * "THE BEER-WARE LICENSE" (Revision 42):
-	 * <[email protected]> wrote this file.  As long as you retain this 
-	 * notice you can do whatever you want with this stuff. If we meet 
-	 * some day, and you think this stuff is worth it, you can buy me a 
+	 * <[email protected]> wrote this file.  As long as you retain this
+	 * notice you can do whatever you want with this stuff. If we meet
+	 * some day, and you think this stuff is worth it, you can buy me a
 	 * beer in return.   Poul-Henning Kamp
 
     b) snprintf replacement
 
 	* Copyright Patrick Powell 1995
-	* This code is based on code written by Patrick Powell 
-	* ([email protected]) It may be used for any purpose as long as this 
+	* This code is based on code written by Patrick Powell
+	* ([email protected]) It may be used for any purpose as long as this
 	* notice remains intact on all source code distributions
 
     c) Compatibility code (openbsd-compat)
 
-       Apart from the previously mentioned licenses, various pieces of code 
+       Apart from the previously mentioned licenses, various pieces of code
        in the openbsd-compat/ subdirectory are licensed as follows:
 
-       Some code is licensed under a 3-term BSD license, to the following 
+       Some code is licensed under a 3-term BSD license, to the following
        copyright holders:
 
 	Todd C. Miller
@@ -279,7 +279,7 @@ OpenSSH contains no GPL code.
 	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 	* SUCH DAMAGE.
 
-       Some code is licensed under an ISC-style license, to the following 
+       Some code is licensed under an ISC-style license, to the following
        copyright holders:
 
 	Internet Software Consortium.
@@ -297,7 +297,7 @@ OpenSSH contains no GPL code.
 	* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 	* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-       Some code is licensed under a MIT-style license to the following 
+       Some code is licensed under a MIT-style license to the following
        copyright holders:
 
 	Free Software Foundation, Inc.
@@ -329,4 +329,4 @@ OpenSSH contains no GPL code.
 
 
 ------
-$OpenBSD: LICENCE,v 1.17 2003/08/22 20:55:06 markus Exp $
+$OpenBSD: LICENCE,v 1.18 2003/11/21 11:57:02 djm Exp $

Makefile.in

@@ -1,4 +1,4 @@
-# $Id: Makefile.in,v 1.252 2003/10/07 00:18:22 djm Exp $
+# $Id: Makefile.in,v 1.253 2003/11/21 12:48:55 djm Exp $
 
 # uncomment if you run a non bourne compatable shell. Ie. csh
 #SHELL = @SH@
@@ -140,22 +140,22 @@ scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o progressmeter.o
 	$(LD) -o $@ scp.o progressmeter.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
 
 ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
-	$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 
+	$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
 
 ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o
-	$(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 
+	$(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
 
 ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
-	$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 
+	$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
 
 ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keysign.o
-	$(LD) -o $@ ssh-keysign.o readconf.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 
+	$(LD) -o $@ ssh-keysign.o readconf.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
 
 ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
-	$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS) 
+	$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
 
 sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
-	$(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 
+	$(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
 
 sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o progressmeter.o
 	$(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
@@ -193,12 +193,12 @@ moduli:
 	echo
 
 clean:	regressclean
-	rm -f *.o *.a $(TARGETS) logintest config.cache config.log 
-	rm -f *.out core 
+	rm -f *.o *.a $(TARGETS) logintest config.cache config.log
+	rm -f *.out core
 	(cd openbsd-compat && $(MAKE) clean)
 
 distclean:	regressclean
-	rm -f *.o *.a $(TARGETS) logintest config.cache config.log 
+	rm -f *.o *.a $(TARGETS) logintest config.cache config.log
 	rm -f *.out core
 	rm -f Makefile config.h config.status ssh_prng_cmds *~
 	rm -rf autom4te.cache
@@ -343,7 +343,7 @@ uninstallall:	uninstall
 	-rmdir $(DESTDIR)$(mandir)
 	-rmdir $(DESTDIR)$(libexecdir)
 
-uninstall: 
+uninstall:
 	-rm -f $(DESTDIR)$(bindir)/slogin
 	-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
 	-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)