Add a prompt to update the bootloader files for Amlogic series devices

README.cn.md

@@ -1,3 +1,6 @@
+> [!NOTE]
+> 由于内核中 `/boot/vmlinuz-xxx` 文件从 `32MB` 调整到了 `64MB`，`晶晨（Amlogic）`系列盒子必须手动更新 OpenWrt 系统启动引导文件，否则更新内核后 OpenWrt 系统将无法启动。手动下载[更新文件](https://github.com/ophub/kernel/releases/download/tools/adjust_the_vmlinuz_from_32mb_to_64mb_for_amlogic_devices.tar.gz)，解压后将压缩包中的 `4` 个文件上传 `/boot` 分区即可完成更新。另一种方法是使用 `3月8日以后` 制作的最新版 OpenWrt 固件进行完整系统更新，也可以实现对 `/boot` 分区中文件的替换。这两种方法任选一种，只需要执行一次即可，以后更新内核时不用再次替换。
+
 # 功能说明
 
 查看英文说明 | [View English description](README.md)

README.md

@@ -1,3 +1,6 @@
+> [!NOTE]
+> Due to the adjustment of the `/boot/vmlinuz-xxx` file in the kernel from `32MB` to `64MB`, `Amlogic` series boxes must manually update the OpenWrt system bootloader, otherwise, the OpenWrt system will fail to start after updating the kernel. To manually update, download the [update file](https://github.com/ophub/kernel/releases/download/tools/adjust_the_vmlinuz_from_32mb_to_64mb_for_amlogic_devices.tar.gz), extract it, and upload the `4` files from the compressed package to the `/boot` partition to complete the update. Another method is to use the latest version of the OpenWrt firmware made `after March 8th` for a full system update, which can also achieve the replacement of files in the `/boot` partition. Choose one of these two methods, you only need to execute it once, and you do not need to replace it again when updating the kernel in the future.
+
 # Function description
 
 View Chinese description  |  [查看中文说明](README.cn.md)