mediatek: add firmware name for AQR PHYs on mt7988a-rfb

Fixes PHY probe in case there is no firmware in a connected EEPROM Signed-off-by: Felix Fietkau <[email protected]>
stokito · May 19, 2024 · ba245d6 · ba245d6
1 parent 59ac044
commit ba245d6
Show file tree

Hide file tree

Showing 2 changed files with 2 additions and 0 deletions.
diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
@@ -22,6 +22,7 @@
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 				compatible = "ethernet-phy-ieee802.3-c45";
+				firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld";
 				reset-gpios = <&pio 72 GPIO_ACTIVE_LOW>;
 				reset-assert-us = <100000>;
 				reset-deassert-us = <221000>;

diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
@@ -22,6 +22,7 @@
 			phy8: ethernet-phy@8 {
 				reg = <8>;
 				compatible = "ethernet-phy-ieee802.3-c45";
+				firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld";
 				reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>;
 				reset-assert-us = <100000>;
 				reset-deassert-us = <221000>;