Merge tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - partition parser: Support MTD names containing one or more colons.
   - mtdblock: clear cache_state to avoid writing to bad blocks
     repeatedly.

  Raw NAND core changes:
   - Stop using nand_release(), patched all drivers.
   - Give more information about the ECC weakness when not matching the
     chip's requirement.
   - MAINTAINERS updates.
   - Support emulated SLC mode on MLC NANDs.
   - Support "constrained" controllers, adapt the core and ONFI/JEDEC
     table parsing and Micron's code.
   - Take check_only into account.
   - Add an invalid ECC mode to discriminate with valid ones.
   - Return an enum from of_get_nand_ecc_algo().
   - Drop OOB_FIRST placement scheme.
   - Introduce nand_extract_bits().
   - Ensure a consistent bitflips numbering.
   - BCH lib:
      - Allow easy bit swapping.
      - Rework a little bit the exported function names.
   - Fix nand_gpio_waitrdy().
   - Propage CS selection to sub operations.
   - Add a NAND_NO_BBM_QUIRK flag.
   - Give the possibility to verify a read operation is supported.
   - Add a helper to check supported operations.
   - Avoid indirect access to ->data_buf().
   - Rename the use_bufpoi variables.
   - Fix comments about the use of bufpoi.
   - Rename a NAND chip option.
   - Reorder the nand_chip->options flags.
   - Translate obscure bitfields into readable macros.
   - Timings:
      - Fix default values.
      - Add mode information to the timings structure.

  Raw NAND controller driver changes:
   - Fixed many error paths.
   - Arasan
      - New driver
   - Au1550nd:
      - Various cleanups
      - Migration to ->exec_op()
   - brcmnand:
      - Misc cleanup.
      - Support v2.1-v2.2 controllers.
      - Remove unused including <linux/version.h>.
      - Correctly verify erased pages.
      - Fix Hamming OOB layout.
   - Cadence
      - Make cadence_nand_attach_chip static.
   - Cafe:
      - Set the NAND_NO_BBM_QUIRK flag
   - cmx270:
      - Remove this controller driver.
   - cs553x:
      - Misc cleanup
      - Migration to ->exec_op()
   - Davinci:
      - Misc cleanup.
      - Migration to ->exec_op()
   - Denali:
      - Add more delays before latching incoming data
   - Diskonchip:
      - Misc cleanup
      - Migration to ->exec_op()
   - Fsmc:
      - Change to non-atomic bit operations.
   - GPMI:
      - Use nand_extract_bits()
      - Fix runtime PM imbalance.
   - Ingenic:
      - Migration to exec_op()
      - Fix the RB gpio active-high property on qi, lb60
      - Make qi_lb60_ooblayout_ops static.
   - Marvell:
      - Misc cleanup and small fixes
   - Nandsim:
      - Fix the error paths, driver wide.
   - Omap_elm:
      - Fix runtime PM imbalance.
   - STM32_FMC2:
      - Misc cleanups (error cases, comments, timeout valus, cosmetic
        changes).

  SPI NOR core changes:
   - Add, update support and fix few flashes.
   - Prepare BFPT parsing for JESD216 rev D.
   - Kernel doc fixes.

  CFI changes:
   - Support the absence of protection registers for Intel CFI flashes.
   - Replace zero-length array with flexible-arrays"

* tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits)
  mtd: clear cache_state to avoid writing to bad blocks repeatedly
  mtd: parser: cmdline: Support MTD names containing one or more colons
  mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match'
  mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones
  mtd: rawnand: Return an enum from of_get_nand_ecc_algo()
  mtd: rawnand: Drop OOB_FIRST placement scheme
  mtd: rawnand: Avoid a typedef
  mtd: Fix typo in mtd_ooblayout_set_databytes() description
  mtd: rawnand: Stop using nand_release()
  mtd: rawnand: nandsim: Reorganize ns_cleanup_module()
  mtd: rawnand: nandsim: Rename a label in ns_init_module()
  mtd: rawnand: nandsim: Manage lists on error in ns_init_module()
  mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup()
  mtd: rawnand: nandsim: Free erase_block_wear on error
  mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object
  mtd: rawnand: nandsim: Stop using nand_release()
  mtd: rawnand: nandsim: Free the partition names in ns_free()
  mtd: rawnand: nandsim: Free the allocated device on error in ns_init()
  mtd: rawnand: nandsim: Free partition names on error in ns_init()
  mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths
  ...

Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/arasan,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arasan NAND Flash Controller with ONFI 3.1 support device tree bindings
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - Naga Sureshkumar Relli <[email protected]>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - xlnx,zynqmp-nand-controller
+        - enum:
+          - arasan,nfc-v3p10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Controller clock
+      - description: NAND bus clock
+
+  clock-names:
+    items:
+      - const: controller
+      - const: bus
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells": true
+  "#size-cells": true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: true
+
+examples:
+  - |
+    nfc: nand-controller@ff100000 {
+        compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+        reg = <0x0 0xff100000 0x0 0x1000>;
+        clock-names = "controller", "bus";
+        clocks = <&clk200>, <&clk100>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 14 4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };

Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt

@@ -20,6 +20,8 @@ Required properties:
                      "brcm,brcmnand" and an appropriate version compatibility
                      string, like "brcm,brcmnand-v7.0"
                      Possible values:
+                         brcm,brcmnand-v2.1
+                         brcm,brcmnand-v2.2
                          brcm,brcmnand-v4.0
                          brcm,brcmnand-v5.0
                          brcm,brcmnand-v6.0

Documentation/devicetree/bindings/mtd/partition.txt

@@ -61,6 +61,9 @@ Optional properties:
   clobbered.
 - lock : Do not unlock the partition at initialization time (not supported on
   all devices)
+- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
+  partition attached to an MLC NAND thus making this partition immune to
+  paired-pages corruptions
 
 Examples:
 

Documentation/driver-api/mtdnand.rst

@@ -276,8 +276,10 @@ unregisters the partitions in the MTD layer.
     #ifdef MODULE
     static void __exit board_cleanup (void)
     {
-        /* Release resources, unregister device */
-        nand_release (mtd_to_nand(board_mtd));
+        /* Unregister device */
+        WARN_ON(mtd_device_unregister(board_mtd));
+        /* Release resources */
+        nand_cleanup(mtd_to_nand(board_mtd));
 
         /* unmap physical address */
         iounmap(baseaddr);

MAINTAINERS

@@ -1305,6 +1305,13 @@ S:	Supported
 W:	http://www.aquantia.com
 F:	drivers/net/ethernet/aquantia/atlantic/aq_ptp*
 
+ARASAN NAND CONTROLLER DRIVER
+M:	Naga Sureshkumar Relli <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
+F:	drivers/mtd/nand/raw/arasan-nand-controller.c
+
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <[email protected]>
 S:	Maintained
@@ -3778,9 +3785,8 @@ F:	Documentation/devicetree/bindings/media/cdns,*.txt
 F:	drivers/media/platform/cadence/cdns-csi2*
 
 CADENCE NAND DRIVER
-M:	Piotr Sroka <[email protected]>
 L:	[email protected]
-S:	Maintained
+S:	Orphan
 F:	Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
 F:	drivers/mtd/nand/raw/cadence-nand-controller.c
 
@@ -10853,9 +10859,8 @@ F:	Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
 F:	drivers/i2c/busses/i2c-mt7621.c
 
 MEDIATEK NAND CONTROLLER DRIVER
-M:	Xiaolei Li <[email protected]>
 L:	[email protected]
-S:	Maintained
+S:	Orphan
 F:	Documentation/devicetree/bindings/mtd/mtk-nand.txt
 F:	drivers/mtd/nand/raw/mtk_*
 

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -420,8 +420,9 @@ read_pri_intelext(struct map_info *map, __u16 adr)
 		extra_size = 0;
 
 		/* Protection Register info */
-		extra_size += (extp->NumProtectionFields - 1) *
-			      sizeof(struct cfi_intelext_otpinfo);
+		if (extp->NumProtectionFields)
+			extra_size += (extp->NumProtectionFields - 1) *
+				      sizeof(struct cfi_intelext_otpinfo);
 	}
 
 	if (extp->MinorVersion >= '1') {
@@ -695,14 +696,16 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 	 */
 	if (extp && extp->MajorVersion == '1' && extp->MinorVersion >= '3'
 	    && extp->FeatureSupport & (1 << 9)) {
+		int offs = 0;
 		struct cfi_private *newcfi;
 		struct flchip *chip;
 		struct flchip_shared *shared;
-		int offs, numregions, numparts, partshift, numvirtchips, i, j;
+		int numregions, numparts, partshift, numvirtchips, i, j;
 
 		/* Protection Register info */
-		offs = (extp->NumProtectionFields - 1) *
-		       sizeof(struct cfi_intelext_otpinfo);
+		if (extp->NumProtectionFields)
+			offs = (extp->NumProtectionFields - 1) *
+			       sizeof(struct cfi_intelext_otpinfo);
 
 		/* Burst Read info */
 		offs += extp->extra[offs+1]+2;

drivers/mtd/devices/docg3.c

@@ -647,7 +647,7 @@ static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc)
 
 	for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
 		ecc[i] = bitrev8(hwecc[i]);
-	numerrs = decode_bch(docg3->cascade->bch, NULL,
+	numerrs = bch_decode(docg3->cascade->bch, NULL,
 			     DOC_ECC_BCH_COVERED_BYTES,
 			     NULL, ecc, NULL, errorpos);
 	BUG_ON(numerrs == -EINVAL);
@@ -1984,8 +1984,8 @@ static int __init docg3_probe(struct platform_device *pdev)
 		return ret;
 	cascade->base = base;
 	mutex_init(&cascade->lock);
-	cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
-			     DOC_ECC_BCH_PRIMPOLY);
+	cascade->bch = bch_init(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
+				DOC_ECC_BCH_PRIMPOLY, false);
 	if (!cascade->bch)
 		return ret;
 
@@ -2021,7 +2021,7 @@ static int __init docg3_probe(struct platform_device *pdev)
 	ret = -ENODEV;
 	dev_info(dev, "No supported DiskOnChip found\n");
 err_probe:
-	free_bch(cascade->bch);
+	bch_free(cascade->bch);
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
 		if (cascade->floors[floor])
 			doc_release_device(cascade->floors[floor]);
@@ -2045,7 +2045,7 @@ static int docg3_release(struct platform_device *pdev)
 		if (cascade->floors[floor])
 			doc_release_device(cascade->floors[floor]);
 
-	free_bch(docg3->cascade->bch);
+	bch_free(docg3->cascade->bch);
 	return 0;
 }
 

drivers/mtd/maps/physmap-gemini.c

@@ -46,11 +46,6 @@
 
 #define FLASH_PARALLEL_HIGH_PIN_CNT	(1 << 20)	/* else low pin cnt */
 
-static const struct of_device_id syscon_match[] = {
-	{ .compatible = "cortina,gemini-syscon" },
-	{ },
-};
-
 struct gemini_flash {
 	struct device *dev;
 	struct pinctrl *p;

drivers/mtd/mtdblock.c

@@ -89,18 +89,21 @@ static int write_cached_data (struct mtdblk_dev *mtdblk)
 
 	ret = erase_write (mtd, mtdblk->cache_offset,
 			   mtdblk->cache_size, mtdblk->cache_data);
-	if (ret)
-		return ret;
 
 	/*
 	 * Here we could arguably set the cache state to STATE_CLEAN.
 	 * However this could lead to inconsistency since we will not
 	 * be notified if this content is altered on the flash by other
 	 * means.  Let's declare it empty and leave buffering tasks to
 	 * the buffer cache instead.
+	 *
+	 * If this cache_offset points to a bad block, data cannot be
+	 * written to the device. Clear cache_state to avoid writing to
+	 * bad blocks repeatedly.
 	 */
-	mtdblk->cache_state = STATE_EMPTY;
-	return 0;
+	if (ret == 0 || ret == -EIO)
+		mtdblk->cache_state = STATE_EMPTY;
+	return ret;
 }