* Using packaging configuration present in packages/os-trusty/debian

* Overriding dh_installdocs to avoid error during package construction

debian/changelog

@@ -0,0 +1,5 @@
+vtrunkd2 (0.1-1) unstable; urgency=low
+
+  * Initial release (Closes: #205)
+
+ -- David Parunakian <[email protected]>  Sat, 16 Jan 2016 00:07:40 +0300

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,15 @@
+Source: vtrunkd2
+Section: net
+Priority: optional
+Maintainer: David Parunakian <[email protected]>
+Build-Depends: debhelper (>= 9), autotools-dev, bison, flex, build-essential, liblzo2-dev,
+ zlib1g-dev, libssl-dev
+Standards-Version: 3.9.5
+Homepage: http://vrayo.com
+
+Package: vtrunkd2
+Architecture: amd64
+Depends: ${shlibs:Depends}, ${misc:Depends}, udev [linux-any] | makedev [linux-any]
+Description: Wireless channel trunking daemon
+ The first software inverse multiplexing solution for connected automotive,
+ live streaming, bonded internet and more.

debian/copyright

@@ -0,0 +1,60 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: vtrunkd2
+Source: <http://vrayo.com>
+
+Files: *
+Copyright: Copyright (C) 2011-2016 Vrayo Systems Ltd. team
+           1998-2003 Maxim Krasnyansky <[email protected]>
+
+License: 
+
+   This package is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   .
+   This package is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   .
+   You should have received a copy of the GNU General Public License
+   along with this package; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+   .
+   In addition, as a special exception, the copyright holders give permission
+   to link the code of portions of this program with the OpenSSL library under
+   certain conditions as described in each individual source file, and
+   distribute linked combinations including the two.
+   .
+   You must obey the GNU General Public License in all respects for all of the
+   code used other than OpenSSL. If you modify file(s) with this exception, you
+   may extend this exception to your version of the file(s), but you are not
+   obligated to do so. If you do not wish to do so, delete this exception
+   statement from your version. If you delete this exception statement from all
+   source files in the program, then also delete it here.
+   .
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
+
+The Debian packaging is © 2006-2008, Martín Ferrari <[email protected]>
+and is licensed under the GPL, see above.
+
+Files: debian/*
+Copyright: 2016 David Parunakian <[email protected]>
+License: GPL-2+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".

debian/docs

@@ -0,0 +1,4 @@
+Credits
+FAQ
+README
+README.Setup

debian/files

@@ -0,0 +1 @@
+vtrunkd2_0.1-1_amd64.deb net optional

debian/init.d.ex

@@ -0,0 +1,166 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          vtrunkd2
+# Required-Start:    $local_fs $network $remote_fs $syslog
+# Required-Stop:     $local_fs $network $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: <Enter a short description of the software>
+# Description:       <Enter a long description of the software>
+#                    <...>
+#                    <...>
+### END INIT INFO
+
+# Author: David Parunakian <dp@wotan>
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="vtrunkd2"
+NAME=vtrunkd2
+DAEMON=/usr/sbin/vtrunkd2
+DAEMON_ARGS=""
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# The above code will not work for interpreted scripts, use the next
+	# six lines below instead (Ref: #643337, start-stop-daemon(8) )
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME --test > /dev/null \
+	#	|| return 1
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME -- $DAEMON_ARGS \
+	#	|| return 2
+
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+	;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+		# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/logrotate

@@ -0,0 +1,7 @@
+/var/log/vtrunkd/*.dump {
+  rotate 54
+  daily
+  compress
+  copytruncate
+  missingok
+}

debian/postinst.ex

@@ -0,0 +1,39 @@
+#!/bin/sh
+# postinst script for vtrunkd2
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/postrm.ex

@@ -0,0 +1,37 @@
+#!/bin/sh
+# postrm script for vtrunkd2
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/rules

@@ -0,0 +1,32 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+#DH_VERBOSE = 1
+
+# see EXAMPLES in dpkg-buildflags(1) and read /usr/share/dpkg/*
+DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/default.mk
+
+# see FEATURE AREAS in dpkg-buildflags(1)
+#export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+# see ENVIRONMENT in dpkg-buildflags(1)
+# package maintainers to append CFLAGS
+#export DEB_CFLAGS_MAINT_APPEND  = -Wall -pedantic
+# package maintainers to append LDFLAGS
+#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
+
+
+# main packaging script based on dh7 syntax
+%:
+	dh $@  --with autotools-dev
+
+# debmake generated override targets
+# This is example for Cmake (See http://bugs.debian.org/641051 )
+#override_dh_auto_configure:
+#	dh_auto_configure -- \
+#	-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH)
+
+override_dh_installdocs:
+
+

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/vtrunkd2.substvars

@@ -0,0 +1,2 @@
+shlibs:Depends=libc6 (>= 2.15)
+misc:Depends=