Merge branch 'staging-linus' into staging-next

This is to get the comedi fixes, and resolve the issue in comdi_test.c and comedi_fops.c that were caused by changes in both branches. It also allows the fwserial driver changes to be applied, as they required the fixes that are in staging-linus. Signed-off-by: Greg Kroah-Hartman <[email protected]>
tdeneau · Jan 7, 2013 · 17cb3be · 17cb3be
2 parents d7f9729 + e16a922
commit 17cb3be
Show file tree

Hide file tree

Showing 49 changed files with 1,366 additions and 967 deletions.
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
@@ -8,6 +8,7 @@ config HID_SENSOR_ACCEL_3D
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Accelerometers 3D"
 	help
 	  Say yes here to build support for the HID SENSOR

diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
@@ -411,7 +411,11 @@ static int __devinit ad7266_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg;
 
-		st->vref_uv = regulator_get_voltage(st->reg);
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		st->vref_uv = ret;
 	} else {
 		/* Use internal reference */
 		st->vref_uv = 2500000;

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
@@ -80,7 +80,7 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
 		*timestamp = pf->timestamp;
 	}
 
-	iio_push_to_buffers(indio_dev, (u8 *)st->buffer);
+	iio_push_to_buffers(idev, (u8 *)st->buffer);
 
 	iio_trigger_notify_done(idev->trig);
 

diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
@@ -1558,17 +1558,18 @@ static int __devinit max1363_probe(struct i2c_client *client,
 
 	return 0;
 error_free_irq:
-	free_irq(st->client->irq, indio_dev);
+	if (client->irq)
+		free_irq(st->client->irq, indio_dev);
 error_uninit_buffer:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_available_scan_masks:
 	kfree(indio_dev->available_scan_masks);
-error_unregister_map:
-	iio_map_array_unregister(indio_dev, client->dev.platform_data);
 error_disable_reg:
 	regulator_disable(st->reg);
 error_put_reg:
 	regulator_put(st->reg);
+error_unregister_map:
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
 error_free_device:
 	iio_device_free(indio_dev);
 error_out:
@@ -1585,10 +1586,8 @@ static int __devexit max1363_remove(struct i2c_client *client)
 		free_irq(st->client->irq, indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->available_scan_masks);
-	if (!IS_ERR(st->reg)) {
-		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
+	regulator_disable(st->reg);
+	regulator_put(st->reg);
 	iio_map_array_unregister(indio_dev, client->dev.platform_data);
 	iio_device_free(indio_dev);
 

diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
@@ -6,14 +6,25 @@ menu "Hid Sensor IIO Common"
 config HID_SENSOR_IIO_COMMON
 	tristate "Common modules for all HID Sensor IIO drivers"
 	depends on HID_SENSOR_HUB
-	select IIO_TRIGGER if IIO_BUFFER
+	select HID_SENSOR_IIO_TRIGGER if IIO_BUFFER
 	help
 	  Say yes here to build support for HID sensor to use
 	  HID sensor common processing for attributes and IIO triggers.
 	  There are many attributes which can be shared among multiple
 	  HID sensor drivers, this module contains processing for those
 	  attributes.
 
+config HID_SENSOR_IIO_TRIGGER
+	tristate "Common module (trigger) for all HID Sensor IIO drivers"
+	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON
+	select IIO_TRIGGER
+	help
+	  Say yes here to build trigger support for HID sensors.
+	  Triggers will be send if all requested attributes were read.
+
+	  If this driver is compiled as a module, it will be named
+	  hid-sensor-trigger.
+
 config HID_SENSOR_ENUM_BASE_QUIRKS
 	bool "ENUM base quirks for HID Sensor IIO drivers"
 	depends on HID_SENSOR_IIO_COMMON

diff --git a/drivers/iio/common/hid-sensors/Makefile b/drivers/iio/common/hid-sensors/Makefile
@@ -3,4 +3,5 @@
 #
 
 obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o
-hid-sensor-iio-common-y := hid-sensor-attributes.o hid-sensor-trigger.o
+obj-$(CONFIG_HID_SENSOR_IIO_TRIGGER) += hid-sensor-trigger.o
+hid-sensor-iio-common-y := hid-sensor-attributes.o
diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
@@ -406,7 +406,11 @@ static int __devinit ad5380_probe(struct device *dev, struct regmap *regmap,
 			goto error_free_reg;
 		}
 
-		st->vref = regulator_get_voltage(st->vref_reg);
+		ret = regulator_get_voltage(st->vref_reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		st->vref = ret;
 	} else {
 		st->vref = st->chip_info->int_vref;
 		ctrl |= AD5380_CTRL_INT_VREF_EN;

diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
@@ -226,7 +226,11 @@ static int __devinit ad5446_probe(struct device *dev, const char *name,
 		if (ret)
 			goto error_put_reg;
 
-		voltage_uv = regulator_get_voltage(reg);
+		ret = regulator_get_voltage(reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		voltage_uv = ret;
 	}
 
 	indio_dev = iio_device_alloc(sizeof(*st));

diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c
@@ -296,7 +296,11 @@ static int __devinit ad5504_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg;
 
-		voltage_uv = regulator_get_voltage(reg);
+		ret = regulator_get_voltage(reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		voltage_uv = ret;
 	}
 
 	spi_set_drvdata(spi, indio_dev);

diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
@@ -238,7 +238,11 @@ static int __devinit ad5624r_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg;
 
-		voltage_uv = regulator_get_voltage(st->reg);
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		voltage_uv = ret;
 	}
 
 	spi_set_drvdata(spi, indio_dev);

diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
@@ -332,7 +332,11 @@ static int __devinit ad5686_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg;
 
-		voltage_uv = regulator_get_voltage(st->reg);
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		voltage_uv = ret;
 	}
 
 	st->chip_info =

diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
@@ -365,7 +365,11 @@ static int __devinit ad5791_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg_pos;
 
-		pos_voltage_uv = regulator_get_voltage(st->reg_vdd);
+		ret = regulator_get_voltage(st->reg_vdd);
+		if (ret < 0)
+			goto error_disable_reg_pos;
+
+		pos_voltage_uv = ret;
 	}
 
 	st->reg_vss = regulator_get(&spi->dev, "vss");
@@ -374,7 +378,11 @@ static int __devinit ad5791_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg_neg;
 
-		neg_voltage_uv = regulator_get_voltage(st->reg_vss);
+		ret = regulator_get_voltage(st->reg_vss);
+		if (ret < 0)
+			goto error_disable_reg_neg;
+
+		neg_voltage_uv = ret;
 	}
 
 	st->pwr_down = true;
@@ -428,6 +436,7 @@ static int __devinit ad5791_probe(struct spi_device *spi)
 	if (!IS_ERR(st->reg_vss))
 		regulator_put(st->reg_vss);
 
+error_disable_reg_pos:
 	if (!IS_ERR(st->reg_vdd))
 		regulator_disable(st->reg_vdd);
 error_put_reg_pos:

diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
@@ -173,7 +173,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
 			} while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt);
 		} while (r_cnt == 0);
 
-		tmp = freq * (u64)st->r1_mod + (st->fpfd > 1);
+		tmp = freq * (u64)st->r1_mod + (st->fpfd >> 1);
 		do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */
 		st->r0_fract = do_div(tmp, st->r1_mod);
 		st->r0_int = tmp;

diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
@@ -17,6 +17,7 @@ config HID_SENSOR_GYRO_3D
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Gyroscope 3D"
 	help
 	  Say yes here to build support for the HID SENSOR

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
@@ -47,6 +47,7 @@ config HID_SENSOR_ALS
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID ALS"
 	help
 	  Say yes here to build support for the HID SENSOR

diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
@@ -8,6 +8,7 @@ config HID_SENSOR_MAGNETOMETER_3D
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Magenetometer 3D"
 	help
 	  Say yes here to build support for the HID SENSOR

diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
@@ -444,6 +444,7 @@ config COMEDI_ADQ12B
 
 config COMEDI_NI_AT_A2150
 	tristate "NI AT-A2150 ISA card support"
+	select COMEDI_FC
 	depends on VIRT_TO_BUS
 	---help---
 	  Enable support for National Instruments AT-A2150 cards

diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
@@ -1648,6 +1648,7 @@ static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
 {
 	const unsigned minor = iminor(file->f_dentry->d_inode);
 	struct comedi_device *dev = comedi_dev_from_minor(minor);
+	struct comedi_file_info *info = comedi_file_info_from_minor(minor);
 	int rc;
 
 	if (!dev)
@@ -1660,6 +1661,9 @@ static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
 	if (cmd == COMEDI_DEVCONFIG) {
 		rc = do_devconfig_ioctl(dev,
 					(struct comedi_devconfig __user *)arg);
+		if (rc == 0)
+			/* Evade comedi_auto_unconfig(). */
+			info->hardware_device = NULL;
 		goto done;
 	}
 

diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -963,7 +963,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -982,7 +982,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1001,7 +1001,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1037,7 +1037,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 32,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1056,7 +1056,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 32,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1092,7 +1092,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_628x_ao,
 	 .reg_type = ni_reg_628x,
 	 .ao_unipolar = 1,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1111,7 +1111,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_628x_ao,
 	 .reg_type = ni_reg_628x,
 	 .ao_unipolar = 1,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1147,7 +1147,7 @@ static const struct ni_board_struct ni_boards[] = {
 	 .ao_range_table = &range_ni_M_628x_ao,
 	 .reg_type = ni_reg_628x,
 	 .ao_unipolar = 1,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 32,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,

diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig
@@ -3,7 +3,9 @@ config FIREWIRE_SERIAL
        depends on FIREWIRE
        help
           This enables TTY over IEEE 1394, providing high-speed serial
-	  connectivity to cabled peers.
+	  connectivity to cabled peers. This driver implements a
+	  ad-hoc transport protocol and is currently limited to
+	  Linux-to-Linux communication.
 
 	  To compile this driver as a module, say M here:  the module will
 	  be called firewire-serial.
diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO
@@ -1,5 +1,5 @@
-TODOs
------
+TODOs prior to this driver moving out of staging
+------------------------------------------------
 1. Implement retries for RCODE_BUSY, RCODE_NO_ACK and RCODE_SEND_ERROR
    - I/O is handled asynchronously which presents some issues when error
      conditions occur.
@@ -11,17 +11,9 @@ TODOs
 -- Issues with firewire stack --
 1. This driver uses the same unregistered vendor id that the firewire core does
      (0xd00d1e). Perhaps this could be exposed as a define in
-     firewire-constants.h?
-2. MAX_ASYNC_PAYLOAD needs to be publicly exposed by core/ohci
-   - otherwise how will this driver know the max size of address window to
-     open for one packet write?
+     firewire.h?
 3. Maybe device_max_receive() and link_speed_to_max_payload() should be
      taken up by the firewire core?
-4. To avoid dropping rx data while still limiting the maximum buffering,
-     the size of the AR context must be known. How to expose this to drivers?
-5. Explore if bigger AR context will reduce RCODE_BUSY responses
-   (or auto-grow to certain max size -- but this would require major surgery
-    as the current AR is contiguously mapped)
 
 -- Issues with TTY core --
   1. Hack for alternate device name scheme

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
@@ -179,7 +179,7 @@ static void dump_profile(struct seq_file *m, struct stats *stats)
 /* Returns the max receive packet size for the given card */
 static inline int device_max_receive(struct fw_device *fw_device)
 {
-	return 1 <<  (clamp_t(int, fw_device->max_rec, 8U, 13U) + 1);
+	return 1 <<  (clamp_t(int, fw_device->max_rec, 8U, 11U) + 1);
 }
 
 static void fwtty_log_tx_error(struct fwtty_port *port, int rcode)

diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h
@@ -374,10 +374,10 @@ static inline void fwtty_bind_console(struct fwtty_port *port,
  */
 static inline int link_speed_to_max_payload(unsigned speed)
 {
-	static const int max_async[] = { 307, 614, 1229, 2458, 4916, 9832, };
-	BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_3200);
+	static const int max_async[] = { 307, 614, 1229, 2458, };
+	BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_800);
 
-	speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_3200);
+	speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_800);
 	if (limit_bw)
 		return max_async[speed];
 	else