Merge branch 'linus' into cpumask-for-linus

Conflicts:
	arch/x86/kernel/cpu/common.c

CREDITS

@@ -3738,7 +3738,7 @@ S: 93149 Nittenau
 S: Germany
 
 N: Gertjan van Wingerde
-E: gwingerde@home.nl
+E: gwingerde@gmail.com
 D: Ralink rt2x00 WLAN driver
 D: Minix V2 file-system
 D: Misc fixes

Documentation/ABI/testing/ima_policy

@@ -0,0 +1,61 @@
+What:		security/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <[email protected]>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		rule format: action [condition ...]
+
+		action: measure | dont_measure
+		condition:= base | lsm
+			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			fsmagic:= hex value
+			uid:= decimal value
+		lsm:  	are LSM specific
+
+		default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=INODE_PERM mask=MAY_READ uid=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in inode_permission.
+
+		Examples of LSM specific definitions:
+
+		SELinux:
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xF97CFF8C
+
+			dont_measure obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
+			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+
+		Smack:
+			measure subj_user=_ func=INODE_PERM mask=MAY_READ

Documentation/DMA-API.txt

@@ -609,3 +609,109 @@ size is the size (and should be a page-sized multiple).
 The return value will be either a pointer to the processor virtual
 address of the memory, or an error (via PTR_ERR()) if any part of the
 region is occupied.
+
+Part III - Debug drivers use of the DMA-API
+-------------------------------------------
+
+The DMA-API as described above as some constraints. DMA addresses must be
+released with the corresponding function with the same size for example. With
+the advent of hardware IOMMUs it becomes more and more important that drivers
+do not violate those constraints. In the worst case such a violation can
+result in data corruption up to destroyed filesystems.
+
+To debug drivers and find bugs in the usage of the DMA-API checking code can
+be compiled into the kernel which will tell the developer about those
+violations. If your architecture supports it you can select the "Enable
+debugging of DMA-API usage" option in your kernel configuration. Enabling this
+option has a performance impact. Do not enable it in production kernels.
+
+If you boot the resulting kernel will contain code which does some bookkeeping
+about what DMA memory was allocated for which device. If this code detects an
+error it prints a warning message with some details into your kernel log. An
+example warning message may look like this:
+
+------------[ cut here ]------------
+WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+	check_unmap+0x203/0x490()
+Hardware name:
+forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+	function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+single] [unmapped as page]
+Modules linked in: nfsd exportfs bridge stp llc r8169
+Pid: 0, comm: swapper Tainted: G        W  2.6.28-dmatest-09289-g8bb99c0 #1
+Call Trace:
+ <IRQ>  [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+ [<ffffffff80647b70>] _spin_unlock+0x10/0x30
+ [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+ [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+ [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+ [<ffffffff80252f96>] queue_work+0x56/0x60
+ [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+ [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+ [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+ [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+ [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+ [<ffffffff803c7ea3>] check_unmap+0x203/0x490
+ [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+ [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+ [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+ [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+ [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+ [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+ [<ffffffff8020c093>] ret_from_intr+0x0/0xa
+ <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+
+The driver developer can find the driver and the device including a stacktrace
+of the DMA-API call which caused this warning.
+
+Per default only the first error will result in a warning message. All other
+errors will only silently counted. This limitation exist to prevent the code
+from flooding your kernel log. To support debugging a device driver this can
+be disabled via debugfs. See the debugfs interface documentation below for
+details.
+
+The debugfs directory for the DMA-API debugging code is called dma-api/. In
+this directory the following files can currently be found:
+
+	dma-api/all_errors	This file contains a numeric value. If this
+				value is not equal to zero the debugging code
+				will print a warning for every error it finds
+				into the kernel log. Be carefull with this
+				option. It can easily flood your logs.
+
+	dma-api/disabled	This read-only file contains the character 'Y'
+				if the debugging code is disabled. This can
+				happen when it runs out of memory or if it was
+				disabled at boot time
+
+	dma-api/error_count	This file is read-only and shows the total
+				numbers of errors found.
+
+	dma-api/num_errors	The number in this file shows how many
+				warnings will be printed to the kernel log
+				before it stops. This number is initialized to
+				one at system boot and be set by writing into
+				this file
+
+	dma-api/min_free_entries
+				This read-only file can be read to get the
+				minimum number of free dma_debug_entries the
+				allocator has ever seen. If this value goes
+				down to zero the code will disable itself
+				because it is not longer reliable.
+
+	dma-api/num_free_entries
+				The current number of free dma_debug_entries
+				in the allocator.
+
+If you have this code compiled into your kernel it will be enabled by default.
+If you want to boot without the bookkeeping anyway you can provide
+'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
+Notice that you can not enable it again at runtime. You have to reboot to do
+so.
+
+When the code disables itself at runtime this is most likely because it ran
+out of dma_debug_entries. These entries are preallocated at boot. The number
+of preallocated entries is defined per architecture. If it is too low for you
+boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
+architectural default.

Documentation/DocBook/Makefile

@@ -12,7 +12,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):

Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl → Documentation/DocBook/alsa-driver-api.tmpl

@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
   <bookinfo>
     <title>The ALSA Driver API</title>
 
@@ -35,6 +35,8 @@
 
   </bookinfo>
 
+<toc></toc>
+
   <chapter><title>Management of Cards and Devices</title>
      <sect1><title>Card Management</title>
 !Esound/core/init.c
@@ -71,6 +73,10 @@
 !Esound/pci/ac97/ac97_codec.c
 !Esound/pci/ac97/ac97_pcm.c
      </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
   </chapter>
   <chapter><title>MIDI API</title>
      <sect1><title>Raw MIDI API</title>
@@ -88,6 +94,9 @@
   <chapter><title>Miscellaneous Functions</title>
      <sect1><title>Hardware-Dependent Devices API</title>
 !Esound/core/hwdep.c
+     </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
      </sect1>
      <sect1><title>ISA DMA Helpers</title>
 !Esound/core/isadma.c

Documentation/DocBook/genericirq.tmpl

@@ -440,6 +440,7 @@ desc->chip->end();
      used in the generic IRQ layer.
      </para>
 !Iinclude/linux/irq.h
+!Iinclude/linux/interrupt.h
   </chapter>
 
   <chapter id="pubfunctions">

Documentation/DocBook/mac80211.tmpl

@@ -17,8 +17,7 @@
     </authorgroup>
 
     <copyright>
-      <year>2007</year>
-      <year>2008</year>
+      <year>2007-2009</year>
       <holder>Johannes Berg</holder>
     </copyright>
 
@@ -165,8 +164,8 @@ usage should require reading the full document.
 !Pinclude/net/mac80211.h Frame format
       </sect1>
       <sect1>
-        <title>Alignment issues</title>
-        <para>TBD</para>
+        <title>Packet alignment</title>
+!Pnet/mac80211/rx.c Packet alignment
       </sect1>
       <sect1>
         <title>Calling into mac80211 from interrupts</title>
@@ -223,6 +222,17 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_key_flags
     </chapter>
 
+    <chapter id="powersave">
+      <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+    </chapter>
+
+    <chapter id="beacon-filter">
+      <title>Beacon filter support</title>
+!Pinclude/net/mac80211.h Beacon filter support
+!Finclude/net/mac80211.h ieee80211_beacon_loss
+    </chapter>
+
     <chapter id="qos">
       <title>Multiple queues and QoS support</title>
       <para>TBD</para>

Documentation/DocBook/uio-howto.tmpl

@@ -41,6 +41,13 @@ GPL version 2.
 </abstract>
 
 <revhistory>
+	<revision>
+	<revnumber>0.8</revnumber>
+	<date>2008-12-24</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added name attributes in mem and portio sysfs directories.
+		</revremark>
+	</revision>
 	<revision>
 	<revnumber>0.7</revnumber>
 	<date>2008-12-23</date>
@@ -303,10 +310,17 @@ interested in translating it, please email me
 	appear if the size of the mapping is not 0.
 </para>
 <para>
-	Each <filename>mapX/</filename> directory contains two read-only files
-	that show start address and size of the memory:
+	Each <filename>mapX/</filename> directory contains four read-only files
+	that show attributes of the memory:
 </para>
 <itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: A string identifier for this mapping. This
+	is optional, the string can be empty. Drivers can set this to make it
+	easier for userspace to find the correct mapping.
+	</para>
+</listitem>
 <listitem>
 	<para>
 	<filename>addr</filename>: The address of memory that can be mapped.
@@ -366,10 +380,17 @@ offset = N * getpagesize();
 	<filename>/sys/class/uio/uioX/portio/</filename>.
 </para>
 <para>
-	Each <filename>portX/</filename> directory contains three read-only
-	files that show start, size, and type of the port region:
+	Each <filename>portX/</filename> directory contains four read-only
+	files that show name, start, size, and type of the port region:
 </para>
 <itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: A string identifier for this port region.
+	The string is optional and can be empty. Drivers can set it to make it
+	easier for userspace to find a certain port region.
+	</para>
+</listitem>
 <listitem>
 	<para>
 	<filename>start</filename>: The first port of this region.