Tags: tehniemer/klippain
Tags
Upstream main (#29) * BTT S2DW V1.0 and similar RP2040 + lis2dw boards (Frix-x#439) * Add Octopus Pro 1.0 MCU definition as duplicate of Octopus MCU * fix typo in BTT_Octopus_Pro_v1.1.cfg (Frix-x#460) * Turn on filter only if it was used during printing. (Frix-x#380) Co-authored-by: Jan-Gerrit Drexhage <[email protected]> * added parameters to park (Frix-x#391) * M8P v2.0 SPI fix (Frix-x#389) Co-authored-by: Félix Boisselier <[email protected]> * Add per material filament sensor management (Frix-x#381) * Remove _TIP_SHAPING from End/cancel print macros (Frix-x#357) Co-authored-by: Jan-Gerrit Drexhage <[email protected]> Co-authored-by: Félix Boisselier <[email protected]> * Klipper SET_PRINT_STATS_INFO compatibility (Frix-x#392) Co-authored-by: Félix Boisselier <[email protected]> * Fix error with turning on filter only if it was used during printing. (Frix-x#406) Fix issue discovered after merging Frix-x#380 * fix missing variable to cancel_print (Frix-x#408) * filament sensor status checks universal (Frix-x#411) * proper Shake&Tune integration in Klippain * add mellow SB2040 v2 and SB2040 Pro toolhead boards (Frix-x#417) * correct overriders misspelling (Frix-x#425) * check if heatsoak is configured to verbose message (Frix-x#424) * typo * Add pin definitions for Fysetc S6 V2.X * add TR8x2 leadscrew config for trident * Add older version of Fysetc mini12864 display * HappyHare & other related dev (Frix-x#371) * HappyHare MMU integration in Klippain * Spoolman support * Multiple MCU templates added or modified, especially MMU templates * LED system rework to support the LED_effects plugin and rainbow barf, etc... ( Frix-x#416 ) * TMC Autotune moonraker updater predefined config (add your motor defs to your overrides.cfg or mcu.cfg) --------- Co-authored-by: Jan-Gerrit Drexhage <[email protected]> Co-authored-by: claudioguareschi <[email protected]> Co-authored-by: Félix Boisselier <[email protected]> Co-authored-by: ksummers92 <[email protected]> * fix status leds at startup (Frix-x#448) * Status leds on startup fix * display menu and V0 Display (Frix-x#420) * Better display menu adapted to Klippain * V0 display support * Klippain boot logo --------- Co-authored-by: Elias Huwyler <[email protected]> * improved display management structure * fixed MMU includes for HappyHare symlink * Add BLTouch support (Frix-x#450) * fixed nozzle and status led on/off. (Frix-x#454) * reverted update manager to main branch * followed naming scheme for bltouch include as virtual * moved the machine.cfg include and included additional thermistor defs * Mellow fly super8 template (Frix-x#463) * Support for TMC5160 on Z Axis (Frix-x#469) * added fix to prevent issues when updating Klippain without MMU (Frix-x#462) * Add configs for Fysetc SB Can TH boards (Frix-x#464) Co-authored-by: Félix Boisselier <[email protected]> * fix: make prime line height a variable parameter (Frix-x#466) Fix Frix-x#465 * fix for extrude when temperature is too low (Frix-x#480) * Add BTT Kraken MCU support (Frix-x#476) * Update Fysetc_Spider_v3.x.cfg to fix fan ports (Frix-x#474) * fix BTT_MMB pin (Frix-x#486) * added fix for rsense for TMC5160 (Frix-x#489) * Add support for dockable probes with separate retainer (Frix-x#401) This is needed for probes like https://github.com/kevinakasam/KlackEnder-Probe * fix for rsense on TMC5160 Z (Frix-x#490) * Create stale action workflow (Frix-x#449) Co-authored-by: Félix Boisselier <[email protected]> * fixed K-Shake&Tune integration * Avoid cooling hotend in extruder_preheating Frix-x#495 (Frix-x#496) * Add a park front macro for toolhead maintenance (Frix-x#494) * Update MMU include order to allow overriding default HH defs (Frix-x#497) * avoid led effect flashing on startup if leds desabled on startup (Frix-x#500) * Added BTT SKR2 board template (Frix-x#503) * fixed the regression introduced in startup call * fix typo in stale.yml * fixed probe pin for BTT_SB2209_RP2040_v1.0 (Frix-x#507) * LDO Nitehawk MCU template and tachometer management (Frix-x#505) Co-authored-by: Meindert <[email protected]> Co-authored-by: Akash Patel <[email protected]> * update primeline to make it adaptive (Frix-x#498) Co-authored-by: Frédéric Beaucamp <[email protected]> Co-authored-by: Félix Boisselier <[email protected]> * fixed missing adaptive primeline variable * remplaced CANCEL_PRINT by PARK in the automated error management gcode * fixed typo in LDO Nitehawk manufacturer template * Add support for Manta_M5P v1.0 and 0.9 degree steppers on Trident Z axis (Frix-x#514) * fix homing check for PARK in error gcode (Frix-x#513) * fix typo in Fysetc_ERCF_ERB.cfg (Frix-x#519) * Update BTT_Kraken_v1.0.cfg, RGB1 fix listed as PF10, but should be PF12 (pf10 is mcu_min7 already, an endstop) verified rest of pins as well * reverted PARK and PARK_FRONT to fail if axis are not homed * fix PARK with overriden param E (Frix-x#515) * install and uninstall scripts improvement (Frix-x#511) * Don't fail uninstall if the backup folder has been removed * Make uninstall work when backup has sub-directories * Make sure we don't fail making a backup when there is no current user config folder * added Mellow Fly Gemini v3 MCU template (Frix-x#527) * fix pinout for Fysetc_ERB board (Frix-x#530) * updated homing_override to improve sensorless homing (Frix-x#531) by using M400 vs the old 2 second dwell time that is not required anymore * fixed v0_display pin and improved overrides docs (Frix-x#535) * Update rpi_temp.cfg Format with _ so a space is in the name, like other temps * Update cabinet_temp.cfg * switched to the new minimum_cruise_ratio Klipper parameter * commented the default minimum_cruise_ratio to not break older Klipper versions --------- Co-authored-by: Gustavo Ribeiro Alves <[email protected]> Co-authored-by: Andrew Wickham <[email protected]> Co-authored-by: Félix Boisselier <[email protected]> Co-authored-by: Benoitone <[email protected]> Co-authored-by: Jan-Gerrit Drexhage <[email protected]> Co-authored-by: Arsène Thieffry <[email protected]> Co-authored-by: claudioguareschi <[email protected]> Co-authored-by: ksummers92 <[email protected]> Co-authored-by: Elias Huwyler <[email protected]> Co-authored-by: Elias Huwyler <[email protected]> Co-authored-by: Neil Smith <[email protected]> Co-authored-by: Reiner Uhry <[email protected]> Co-authored-by: lokiagent <[email protected]> Co-authored-by: Arcadien <[email protected]> Co-authored-by: Tyler Olson <[email protected]> Co-authored-by: Felix Boisselier <[email protected]> Co-authored-by: elpopo <[email protected]> Co-authored-by: tsk-2222 <[email protected]> Co-authored-by: Meindert <[email protected]> Co-authored-by: Akash Patel <[email protected]> Co-authored-by: Frédéric Beaucamp <[email protected]> Co-authored-by: Birkemosen <[email protected]> Co-authored-by: Eric <[email protected]> Co-authored-by: Magne Rasmussen <[email protected]> Co-authored-by: Parker <[email protected]>
Dev (#25) * Fix error with turning on filter only if it was used during printing. (Frix-x#406) Fix issue discovered after merging Frix-x#380 * fix missing variable to cancel_print (Frix-x#408) * Update logic to check if filament sensor is enabled. Must check each potential filament sensor type to see if it is defined before checking its state to eliminate an undefined error.