Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Merge 4.14-rc3 in order to pick up the new timer_setup function.

Documentation/cpu-freq/index.txt

@@ -32,8 +32,6 @@ cpufreq-stats.txt -	General description of sysfs cpufreq stats.
 
 index.txt	-	File index, Mailing list and Links (this document)
 
-intel-pstate.txt -	Intel pstate cpufreq driver specific file.
-
 pcc-cpufreq.txt -	PCC cpufreq driver specific file.
 
 

Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt

@@ -32,7 +32,7 @@ Example:
 		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
 		reg = <0x58024400 0x400>;
 		#reset-cells = <1>;
-		#clock-cells = <2>;
+		#clock-cells = <1>;
 		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
 
 		st,syscfg = <&pwrcfg>;

Documentation/devicetree/bindings/leds/ams,as3645a.txt

@@ -15,11 +15,14 @@ Required properties
 
 compatible	: Must be "ams,as3645a".
 reg		: The I2C address of the device. Typically 0x30.
+#address-cells	: 1
+#size-cells	: 0
 
 
-Required properties of the "flash" child node
-=============================================
+Required properties of the flash child node (0)
+===============================================
 
+reg: 0
 flash-timeout-us: Flash timeout in microseconds. The value must be in
 		  the range [100000, 850000] and divisible by 50000.
 flash-max-microamp: Maximum flash current in microamperes. Has to be
@@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The
 			and divisible by 50000.
 
 
-Optional properties of the "flash" child node
-=============================================
+Optional properties of the flash child node
+===========================================
 
 label		: The label of the flash LED.
 
 
-Required properties of the "indicator" child node
-=================================================
+Required properties of the indicator child node (1)
+===================================================
 
+reg: 1
 led-max-microamp: Maximum indicator current. The allowed values are
 		  2500, 5000, 7500 and 10000.
 
-Optional properties of the "indicator" child node
-=================================================
+Optional properties of the indicator child node
+===============================================
 
 label		: The label of the indicator LED.
 
@@ -55,16 +59,20 @@ Example
 =======
 
 	as3645a@30 {
+		#address-cells: 1
+		#size-cells: 0
 		reg = <0x30>;
 		compatible = "ams,as3645a";
-		flash {
+		flash@0 {
+			reg = <0x0>;
 			flash-timeout-us = <150000>;
 			flash-max-microamp = <320000>;
 			led-max-microamp = <60000>;
 			ams,input-max-microamp = <1750000>;
 			label = "as3645a:flash";
 		};
-		indicator {
+		indicator@1 {
+			reg = <0x1>;
 			led-max-microamp = <10000>;
 			label = "as3645a:indicator";
 		};

Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt

@@ -8,6 +8,12 @@ Required properties:
                    the firmware event log
 - linux,sml-size : size of the memory allocated for the firmware event log
 
+Optional properties:
+
+- powered-while-suspended: present when the TPM is left powered on between
+                           suspend and resume (makes the suspend/resume
+                           callbacks do nothing).
+
 Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
 ----------------------------------------------------------
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -3,8 +3,8 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
-abcn	Abracon Corporation
 abilis	Abilis Systems
+abracon	Abracon Corporation
 actions	Actions Semiconductor Co., Ltd.
 active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH

Documentation/driver-api/pm/devices.rst

@@ -675,7 +675,7 @@ sub-domain of the parent domain.
 
 Support for power domains is provided through the :c:member:`pm_domain` field of
 |struct device|.  This field is a pointer to an object of type
-|struct dev_pm_domain|, defined in :file:`include/linux/pm.h``, providing a set
+|struct dev_pm_domain|, defined in :file:`include/linux/pm.h`, providing a set
 of power management callbacks analogous to the subsystem-level and device driver
 callbacks that are executed for the given device during all power transitions,
 instead of the respective subsystem-level callbacks.  Specifically, if a

Documentation/filesystems/cifs/AUTHORS

@@ -41,6 +41,11 @@ Igor Mammedov (DFS support)
 Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
 Scott Lovenberg
 Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features)
+Aurelien Aptel (for DFS SMB3 work and some key bug fixes)
+Ronnie Sahlberg (for SMB3 xattr work and bug fixes)
+Shirish Pargaonkar (for many ACL patches over the years)
+Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security)
+
 
 Test case and Bug Report contributors
 -------------------------------------

Documentation/filesystems/cifs/README

@@ -1,10 +1,14 @@
-The CIFS VFS support for Linux supports many advanced network filesystem 
-features such as hierarchical dfs like namespace, hardlinks, locking and more.  
+This module supports the SMB3 family of advanced network protocols (as well
+as older dialects, originally called "CIFS" or SMB1).
+
+The CIFS VFS module for Linux supports many advanced network filesystem
+features such as hierarchical DFS like namespace, hardlinks, locking and more.
 It was designed to comply with the SNIA CIFS Technical Reference (which 
 supersedes the 1992 X/Open SMB Standard) as well as to perform best practice 
 practical interoperability with Windows 2000, Windows XP, Samba and equivalent 
 servers.  This code was developed in participation with the Protocol Freedom
-Information Foundation.
+Information Foundation.  CIFS and now SMB3 has now become a defacto
+standard for interoperating between Macs and Windows and major NAS appliances.
 
 Please see
   http://protocolfreedom.org/ and
@@ -15,30 +19,11 @@ for more details.
 For questions or bug reports please contact:
     [email protected] ([email protected]) 
 
+See the project page at: https://wiki.samba.org/index.php/LinuxCIFS_utils
+
 Build instructions:
 ==================
-For Linux 2.4:
-1) Get the kernel source (e.g.from http://www.kernel.org)
-and download the cifs vfs source (see the project page
-at http://us1.samba.org/samba/Linux_CIFS_client.html)
-and change directory into the top of the kernel directory
-then patch the kernel (e.g. "patch -p1 < cifs_24.patch") 
-to add the cifs vfs to your kernel configure options if
-it has not already been added (e.g. current SuSE and UL
-users do not need to apply the cifs_24.patch since the cifs vfs is
-already in the kernel configure menu) and then
-mkdir linux/fs/cifs and then copy the current cifs vfs files from
-the cifs download to your kernel build directory e.g.
-
-	cp <cifs_download_dir>/fs/cifs/* to <kernel_download_dir>/fs/cifs
-
-2) make menuconfig (or make xconfig)
-3) select cifs from within the network filesystem choices
-4) save and exit
-5) make dep
-6) make modules (or "make" if CIFS VFS not to be built as a module)
-
-For Linux 2.6:
+For Linux:
 1) Download the kernel (e.g. from http://www.kernel.org)
 and change directory into the top of the kernel directory tree
 (e.g. /usr/src/linux-2.5.73)
@@ -61,16 +46,13 @@ would simply type "make install").
 If you do not have the utility mount.cifs (in the Samba 3.0 source tree and on 
 the CIFS VFS web site) copy it to the same directory in which mount.smbfs and 
 similar files reside (usually /sbin).  Although the helper software is not  
-required, mount.cifs is recommended.  Eventually the Samba 3.0 utility program 
-"net" may also be helpful since it may someday provide easier mount syntax for
-users who are used to Windows e.g.
-	net use <mount point> <UNC name or cifs URL>
+required, mount.cifs is recommended.  Most distros include a "cifs-utils"
+package that includes this utility so it is recommended to install this.
+
 Note that running the Winbind pam/nss module (logon service) on all of your
 Linux clients is useful in mapping Uids and Gids consistently across the
 domain to the proper network user.  The mount.cifs mount helper can be
-trivially built from Samba 3.0 or later source e.g. by executing:
-
-	gcc samba/source/client/mount.cifs.c -o mount.cifs
+found at cifs-utils.git on git.samba.org
 
 If cifs is built as a module, then the size and number of network buffers
 and maximum number of simultaneous requests to one server can be configured.
@@ -79,6 +61,18 @@ Changing these from their defaults is not recommended. By executing modinfo
 on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made
 at module initialization time (by running insmod cifs.ko) can be seen.
 
+Recommendations
+===============
+To improve security the SMB2.1 dialect or later (usually will get SMB3) is now
+the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0"
+on mount (or vers=2.0 for Windows Vista).  Note that the CIFS (vers=1.0) is
+much older and less secure than the default dialect SMB3 which includes
+many advanced security features such as downgrade attack detection
+and encrypted shares and stronger signing and authentication algorithms.
+There are additional mount options that may be helpful for SMB3 to get
+improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1):
+     "mfsymlinks" and "cifsacl" and "idsfromsid"
+
 Allowing User Mounts
 ====================
 To permit users to mount and unmount over directories they own is possible
@@ -98,9 +92,7 @@ and execution of suid programs on the remote target would be enabled
 by default. This can be changed, as with nfs and other filesystems, 
 by simply specifying "nosuid" among the mount options. For user mounts 
 though to be able to pass the suid flag to mount requires rebuilding 
-mount.cifs with the following flag: 
-
-        gcc samba/source/client/mount.cifs.c -DCIFS_ALLOW_USR_SUID -o mount.cifs
+mount.cifs with the following flag: CIFS_ALLOW_USR_SUID
 
 There is a corresponding manual page for cifs mounting in the Samba 3.0 and
 later source tree in docs/manpages/mount.cifs.8 
@@ -189,18 +181,18 @@ applications running on the same server as Samba.
 Use instructions:
 ================
 Once the CIFS VFS support is built into the kernel or installed as a module 
-(cifs.o), you can use mount syntax like the following to access Samba or Windows 
-servers: 
+(cifs.ko), you can use mount syntax like the following to access Samba or
+Mac or Windows servers:
 
-  mount -t cifs //9.53.216.11/e$ /mnt -o user=myname,pass=mypassword
+  mount -t cifs //9.53.216.11/e$ /mnt -o username=myname,password=mypassword
 
 Before -o the option -v may be specified to make the mount.cifs
 mount helper display the mount steps more verbosely.  
 After -o the following commonly used cifs vfs specific options
 are supported:
 
-  user=<username>
-  pass=<password>
+  username=<username>
+  password=<password>
   domain=<domain name>
 
 Other cifs mount options are described below.  Use of TCP names (in addition to
@@ -246,13 +238,16 @@ the Server's registry.  Samba starting with version 3.10 will allow such
 filenames (ie those which contain valid Linux characters, which normally
 would be forbidden for Windows/CIFS semantics) as long as the server is
 configured for Unix Extensions (and the client has not disabled
-/proc/fs/cifs/LinuxExtensionsEnabled).
-
+/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option
+"mapposix" can be used on CIFS (vers=1.0) to force the mapping of
+illegal Windows/NTFS/SMB characters to a remap range (this mount parm
+is the default for SMB3). This remap ("mapposix") range is also
+compatible with Mac (and "Services for Mac" on some older Windows).
 
 CIFS VFS Mount Options
 ======================
 A partial list of the supported mount options follows:
-  user		The user name to use when trying to establish
+  username	The user name to use when trying to establish
 		the CIFS session.
   password	The user password.  If the mount helper is
 		installed, the user will be prompted for password

Documentation/filesystems/cifs/TODO

@@ -1,4 +1,4 @@
-Version 2.03 August 1, 2014
+Version 2.04 September 13, 2017
 
 A Partial List of Missing Features
 ==================================
@@ -8,73 +8,69 @@ for visible, important contributions to this module.  Here
 is a partial list of the known problems and missing features:
 
 a) SMB3 (and SMB3.02) missing optional features:
-   - RDMA
+   - RDMA (started)
    - multichannel (started)
    - directory leases (improved metadata caching)
    - T10 copy offload (copy chunk is only mechanism supported)
-   - encrypted shares
 
 b) improved sparse file support
 
 c) Directory entry caching relies on a 1 second timer, rather than
-using FindNotify or equivalent.  - (started)
+using Directory Leases
 
 d) quota support (needs minor kernel change since quota calls
 to make it to network filesystems or deviceless filesystems)
 
-e) improve support for very old servers (OS/2 and Win9x for example)
-Including support for changing the time remotely (utimes command).
+e) Better optimize open to reduce redundant opens (using reference
+counts more) and to improve use of compounding in SMB3 to reduce
+number of roundtrips.
 
-f) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
-extra copy in/out of the socket buffers in some cases.
-
-g) Better optimize open (and pathbased setfilesize) to reduce the
-oplock breaks coming from windows srv.  Piggyback identical file
-opens on top of each other by incrementing reference count rather
-than resending (helps reduce server resource utilization and avoid
-spurious oplock breaks).
-
-h) Add support for storing symlink info to Windows servers
-in the Extended Attribute format their SFU clients would recognize.
-
-i) Finish inotify support so kde and gnome file list windows
+f) Finish inotify support so kde and gnome file list windows
 will autorefresh (partially complete by Asser). Needs minor kernel
 vfs change to support removing D_NOTIFY on a file.   
 
-j) Add GUI tool to configure /proc/fs/cifs settings and for display of
+g) Add GUI tool to configure /proc/fs/cifs settings and for display of
 the CIFS statistics (started)
 
-k) implement support for security and trusted categories of xattrs
+h) implement support for security and trusted categories of xattrs
 (requires minor protocol extension) to enable better support for SELINUX
 
-l) Implement O_DIRECT flag on open (already supported on mount)
+i) Implement O_DIRECT flag on open (already supported on mount)
 
-m) Create UID mapping facility so server UIDs can be mapped on a per
+j) Create UID mapping facility so server UIDs can be mapped on a per
 mount or a per server basis to client UIDs or nobody if no mapping
-exists.  This is helpful when Unix extensions are negotiated to
-allow better permission checking when UIDs differ on the server
-and client.  Add new protocol request to the CIFS protocol 
-standard for asking the server for the corresponding name of a
-particular uid.
+exists. Also better integration with winbind for resolving SID owners
+
+k) Add tools to take advantage of more smb3 specific ioctls and features
+
+l) encrypted file support
+
+m) improved stats gathering, tools (perhaps integration with nfsometer?)
 
-n) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too)
+n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
+file attribute via chflags) and improve user space tools for managing and
+viewing them.
 
-o) mount check for unmatched uids
+o) mount helper GUI (to simplify the various configuration options on mount)
 
-p) Add support for new vfs entry point for fallocate
+p) autonegotiation of dialects (offering more than one dialect ie SMB3.02,
+SMB3, SMB2.1 not just SMB3).
 
-q) Add tools to take advantage of cifs/smb3 specific ioctls and features
-such as "CopyChunk" (fast server side file copy)
+q) Allow mount.cifs to be more verbose in reporting errors with dialect
+or unsupported feature errors.
 
-r) encrypted file support
+r) updating cifs documentation, and user guid.
 
-s) improved stats gathering, tools (perhaps integration with nfsometer?)
+s) Addressing bugs found by running a broader set of xfstests in standard
+file system xfstest suite.
 
-t) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
-file attribute via chflags)
+t) split cifs and smb3 support into separate modules so legacy (and less
+secure) CIFS dialect can be disabled in environments that don't need it
+and simplify the code.
 
-u) mount helper GUI (to simplify the various configuration options on mount)
+u) Finish up SMB3.1.1 dialect support
 
+v) POSIX Extensions for SMB3.1.1
 
 KNOWN BUGS
 ====================================