Merge tag 'drm-msm-next-2018-03-20' of git://people.freedesktop.org/~…

…robclark/linux into drm-next

Updates for 4.17.  Sorry, running a bit late on this, didn't have a
chance to send pull-req before heading to linaro.  But it has all been
in linux-next for a while.  Main updates:

 + DSI updates from 10nm / SDM845
 + fix for race condition with a3xx/a4xx fence completion irq
 + some refactoring/prep work for eventual a6xx support (ie. when we have
   a userspace)
 + a5xx debugfs enhancements
 + some mdp5 fixes/cleanups to prepare for eventually merging writeback
   support (ie. when we have a userspace)

* tag 'drm-msm-next-2018-03-20' of git://people.freedesktop.org/~robclark/linux: (36 commits)
  drm/msm: fix building without debugfs
  drm/msm/mdp5: don't pre-reserve LM's if no dual-dsi
  drm/msm/mdp5: add missing LM flush bits
  drm/msm/mdp5: print a bit more of the atomic state
  drm/msm/mdp5: rework CTL START signal handling
  drm/msm: Trigger fence completion from GPU
  drm/msm/dsi: fix direct caller of msm_gem_free_object()
  drm/msm: strip out msm_fence_cb
  drm/msm: rename mdp->disp
  drm/msm/dsi: Fix potential NULL pointer dereference in msm_dsi_modeset_init
  drm/msm/adreno/a5xx_debugfs: fix potential NULL pointer dereference
  drm/msm/dsi: Get byte_intf_clk only for versions that need it
  drm/msm/adreno: Use generic function to load firmware to a buffer object
  drm/msm/adreno: Define a list of firmware files to load per target
  drm/msm/adreno: Rename gpmufw to powerfw
  drm/msm: Pass the correct aperture end to drm_mm_init
  drm/msm/gpu: Set number of clocks to 0 if the list allocation fails
  drm/msm: Replace gem_object deprecated functions
  drm/msm/hdmi: fix semicolon.cocci warnings
  drm/msm/mdp5: Fix trailing semicolon
  ...

Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -7,8 +7,6 @@ Required properties:
 - reg: Physical base address and length of the registers of controller
 - reg-names: The names of register regions. The following regions are required:
   * "dsi_ctrl"
-- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
-  be 0 or 1, since we have 2 DSI controllers at most for now.
 - interrupts: The interrupt signal from the DSI block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks.
@@ -22,6 +20,8 @@ Required properties:
   * "core"
   For DSIv2, we need an additional clock:
    * "src"
+  For DSI6G v2.0 onwards, we need also need the clock:
+   * "byte_intf"
 - assigned-clocks: Parents of "byte" and "pixel" for the given platform.
 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
   by a DSI PHY block. See [1] for details on clock bindings.
@@ -88,21 +88,35 @@ Required properties:
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
-- reg: Physical base address and length of the registers of PLL, PHY and PHY
-  regulator
+  * "qcom,dsi-phy-14nm"
+  * "qcom,dsi-phy-10nm"
+- reg: Physical base address and length of the registers of PLL, PHY. Some
+  revisions require the PHY regulator base address, whereas others require the
+  PHY lane base address. See below for each PHY revision.
 - reg-names: The names of register regions. The following regions are required:
+  For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
+  For DSI 14nm and 10nm PHYs:
+  * "dsi_pll"
+  * "dsi_phy"
+  * "dsi_phy_lane"
 - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
   2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
-  be 0 or 1, since we have 2 DSI PHYs at most for now.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks. See [1] for details on clock bindings.
 - clock-names: the following clocks are required:
   * "iface"
+  For 28nm HPM/LP, 28nm 8960 PHYs:
+- vddio-supply: phandle to vdd-io regulator device node
+  For 20nm PHY:
 - vddio-supply: phandle to vdd-io regulator device node
+- vcca-supply: phandle to vcca regulator device node
+  For 14nm PHY:
+- vcca-supply: phandle to vcca regulator device node
+  For 10nm PHY:
+- vdds-supply: phandle to vdds regulator device node
 
 Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY

drivers/gpu/drm/msm/Kconfig

@@ -28,6 +28,19 @@ config DRM_MSM_REGISTER_LOGGING
 	  that can be parsed by envytools demsm tool.  If enabled, register
 	  logging can be switched on via msm.reglog=y module param.
 
+config DRM_MSM_GPU_SUDO
+	bool "Enable SUDO flag on submits"
+	depends on DRM_MSM && EXPERT
+	default n
+	help
+	  Enable userspace that has CAP_SYS_RAWIO to submit GPU commands
+	  that are run from RB instead of IB1.  This essentially gives
+	  userspace kernel level access, but is useful for firmware
+	  debugging.
+
+	  Only use this if you are a driver developer.  This should *not*
+	  be enabled for production kernels.  If unsure, say N.
+
 config DRM_MSM_HDMI_HDCP
 	bool "Enable HDMI HDCP support in MSM DRM driver"
 	depends on DRM_MSM && QCOM_SCM
@@ -81,3 +94,10 @@ config DRM_MSM_DSI_14NM_PHY
 	default y
 	help
 	  Choose this option if DSI PHY on 8996 is used on the platform.
+
+config DRM_MSM_DSI_10NM_PHY
+	bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if DSI PHY on SDM845 is used on the platform.

drivers/gpu/drm/msm/Makefile

@@ -25,26 +25,26 @@ msm-y := \
 	edp/edp_connector.o \
 	edp/edp_ctrl.o \
 	edp/edp_phy.o \
-	mdp/mdp_format.o \
-	mdp/mdp_kms.o \
-	mdp/mdp4/mdp4_crtc.o \
-	mdp/mdp4/mdp4_dtv_encoder.o \
-	mdp/mdp4/mdp4_lcdc_encoder.o \
-	mdp/mdp4/mdp4_lvds_connector.o \
-	mdp/mdp4/mdp4_irq.o \
-	mdp/mdp4/mdp4_kms.o \
-	mdp/mdp4/mdp4_plane.o \
-	mdp/mdp5/mdp5_cfg.o \
-	mdp/mdp5/mdp5_ctl.o \
-	mdp/mdp5/mdp5_crtc.o \
-	mdp/mdp5/mdp5_encoder.o \
-	mdp/mdp5/mdp5_irq.o \
-	mdp/mdp5/mdp5_mdss.o \
-	mdp/mdp5/mdp5_kms.o \
-	mdp/mdp5/mdp5_pipe.o \
-	mdp/mdp5/mdp5_mixer.o \
-	mdp/mdp5/mdp5_plane.o \
-	mdp/mdp5/mdp5_smp.o \
+	disp/mdp_format.o \
+	disp/mdp_kms.o \
+	disp/mdp4/mdp4_crtc.o \
+	disp/mdp4/mdp4_dtv_encoder.o \
+	disp/mdp4/mdp4_lcdc_encoder.o \
+	disp/mdp4/mdp4_lvds_connector.o \
+	disp/mdp4/mdp4_irq.o \
+	disp/mdp4/mdp4_kms.o \
+	disp/mdp4/mdp4_plane.o \
+	disp/mdp5/mdp5_cfg.o \
+	disp/mdp5/mdp5_ctl.o \
+	disp/mdp5/mdp5_crtc.o \
+	disp/mdp5/mdp5_encoder.o \
+	disp/mdp5/mdp5_irq.o \
+	disp/mdp5/mdp5_mdss.o \
+	disp/mdp5/mdp5_kms.o \
+	disp/mdp5/mdp5_pipe.o \
+	disp/mdp5/mdp5_mixer.o \
+	disp/mdp5/mdp5_plane.o \
+	disp/mdp5/mdp5_smp.o \
 	msm_atomic.o \
 	msm_debugfs.o \
 	msm_drv.o \
@@ -62,31 +62,35 @@ msm-y := \
 	msm_ringbuffer.o \
 	msm_submitqueue.o
 
+msm-$(CONFIG_DEBUG_FS) += adreno/a5xx_debugfs.o
+
 msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
-msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
+msm-$(CONFIG_COMMON_CLK) += disp/mdp4/mdp4_lvds_pll.o
 msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
 msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_phy_8996.o
 
 msm-$(CONFIG_DRM_MSM_HDMI_HDCP) += hdmi/hdmi_hdcp.o
 
 msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
-			mdp/mdp4/mdp4_dsi_encoder.o \
+			disp/mdp4/mdp4_dsi_encoder.o \
 			dsi/dsi_cfg.o \
 			dsi/dsi_host.o \
 			dsi/dsi_manager.o \
 			dsi/phy/dsi_phy.o \
-			mdp/mdp5/mdp5_cmd_encoder.o
+			disp/mdp5/mdp5_cmd_encoder.o
 
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/phy/dsi_phy_14nm.o
+msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/phy/dsi_phy_10nm.o
 
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
 msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o
+msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o
 endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o

drivers/gpu/drm/msm/adreno/a3xx_gpu.c

@@ -35,6 +35,7 @@
 	 A3XX_INT0_CP_RB_INT |             \
 	 A3XX_INT0_CP_REG_PROTECT_FAULT |  \
 	 A3XX_INT0_CP_AHB_ERROR_HALT |     \
+	 A3XX_INT0_CACHE_FLUSH_TS |        \
 	 A3XX_INT0_UCHE_OOB_ACCESS)
 
 extern bool hang_debug;
@@ -256,8 +257,8 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
 	 */
 
 	/* Load PM4: */
-	ptr = (uint32_t *)(adreno_gpu->pm4->data);
-	len = adreno_gpu->pm4->size / 4;
+	ptr = (uint32_t *)(adreno_gpu->fw[ADRENO_FW_PM4]->data);
+	len = adreno_gpu->fw[ADRENO_FW_PM4]->size / 4;
 	DBG("loading PM4 ucode version: %x", ptr[1]);
 
 	gpu_write(gpu, REG_AXXX_CP_DEBUG,
@@ -268,8 +269,8 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
 		gpu_write(gpu, REG_AXXX_CP_ME_RAM_DATA, ptr[i]);
 
 	/* Load PFP: */
-	ptr = (uint32_t *)(adreno_gpu->pfp->data);
-	len = adreno_gpu->pfp->size / 4;
+	ptr = (uint32_t *)(adreno_gpu->fw[ADRENO_FW_PFP]->data);
+	len = adreno_gpu->fw[ADRENO_FW_PFP]->size / 4;
 	DBG("loading PFP ucode version: %x", ptr[5]);
 
 	gpu_write(gpu, REG_A3XX_CP_PFP_UCODE_ADDR, 0);

drivers/gpu/drm/msm/adreno/a4xx_gpu.c

@@ -27,6 +27,7 @@
 	 A4XX_INT0_CP_RB_INT |             \
 	 A4XX_INT0_CP_REG_PROTECT_FAULT |  \
 	 A4XX_INT0_CP_AHB_ERROR_HALT |     \
+	 A4XX_INT0_CACHE_FLUSH_TS |        \
 	 A4XX_INT0_UCHE_OOB_ACCESS)
 
 extern bool hang_debug;
@@ -274,16 +275,16 @@ static int a4xx_hw_init(struct msm_gpu *gpu)
 		return ret;
 
 	/* Load PM4: */
-	ptr = (uint32_t *)(adreno_gpu->pm4->data);
-	len = adreno_gpu->pm4->size / 4;
+	ptr = (uint32_t *)(adreno_gpu->fw[ADRENO_FW_PM4]->data);
+	len = adreno_gpu->fw[ADRENO_FW_PM4]->size / 4;
 	DBG("loading PM4 ucode version: %u", ptr[0]);
 	gpu_write(gpu, REG_A4XX_CP_ME_RAM_WADDR, 0);
 	for (i = 1; i < len; i++)
 		gpu_write(gpu, REG_A4XX_CP_ME_RAM_DATA, ptr[i]);
 
 	/* Load PFP: */
-	ptr = (uint32_t *)(adreno_gpu->pfp->data);
-	len = adreno_gpu->pfp->size / 4;
+	ptr = (uint32_t *)(adreno_gpu->fw[ADRENO_FW_PFP]->data);
+	len = adreno_gpu->fw[ADRENO_FW_PFP]->size / 4;
 	DBG("loading PFP ucode version: %u", ptr[0]);
 
 	gpu_write(gpu, REG_A4XX_CP_PFP_UCODE_ADDR, 0);