Tweak code formatting

tneems · Dec 19, 2019 · 865071a · 865071a
1 parent 329f5b4
commit 865071a
Show file tree

Hide file tree

Showing 2 changed files with 7 additions and 5 deletions.
diff --git a/Marlin/src/gcode/feature/trinamic/M569.cpp b/Marlin/src/gcode/feature/trinamic/M569.cpp
@@ -44,7 +44,9 @@ void tmc_set_stealthChop(TMC &st, const bool enable) {
 static void set_stealth_status(const bool enable, const int8_t target_extruder) {
   #define TMC_SET_STEALTH(Q) tmc_set_stealthChop(stepper##Q, enable)
 
-  #if AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(X2) || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Y2) || AXIS_HAS_STEALTHCHOP(Z) || AXIS_HAS_STEALTHCHOP(Z2) || AXIS_HAS_STEALTHCHOP(Z3)
+  #if    AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(X2) \
+      || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Y2) \
+      || AXIS_HAS_STEALTHCHOP(Z) || AXIS_HAS_STEALTHCHOP(Z2) || AXIS_HAS_STEALTHCHOP(Z3)
     const uint8_t index = parser.byteval('I');
   #endif
 

diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
@@ -2081,6 +2081,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #error "TMC2208 Software Serial is supported only on AVR, LPC1768, STM32F1 and STM32F4 platforms."
 #endif
 
+#if ENABLED(DELTA) && (ENABLED(STEALTHCHOP_XY) != ENABLED(STEALTHCHOP_Z))
+  #error "STEALTHCHOP_XY and STEALTHCHOP_Z must be the same on DELTA."
+#endif
+
 #if ENABLED(SENSORLESS_HOMING)
   // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
   // is necessary in order to reset the stallGuard indication between the initial movement of all three
@@ -2236,10 +2240,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #endif
 #undef IN_CHAIN
 
-#if ENABLED(DELTA) && (ENABLED(STEALTHCHOP_XY) != ENABLED(STEALTHCHOP_Z))
-  #error "STEALTHCHOP_XY and STEALTHCHOP_Z must be the same on DELTA."
-#endif
-
 /**
  * Digipot requirement
  */