A collection of command line tools for ARM devices with Allwinner SoCs.

Android port that aims to bring both user- and developer-friendly experience in using AOSP with a set of single-board computers (SBC), phones and other devices.

SCP (power management) firmware for sunxi SoCs

miZy - tiny fast embedded linux

Device Tree overlays for sunxi devices running Armbian images with mainline kernel

This project is about shaping existing GPL Linux kernel drivers for the PVR/SGX5 architecture so that they can become accepted into drivers/gpu/drm. It is NOT about reverse engineering or user-space components (firmware and libs), just the kernel device drivers. There is also be some glue code for the processor of the SoC (OMAP, Sunxi, jz4780).

NixOS on Allwinner D1 RISC-V

advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c display, FEL mode, and many other improvement

OS development toolkit for various ARM embedded devices

Open hardware compute module with Allwinner A13 (ARM-A8 @1GHZ), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)

miZy linux kernel 3.4.113+ mod for Orange Pi Zero h2+ / Plus2 h3 and other sunxi boards

A modified driver for using the RTL8188FTV WiFi Radio with Debian, Armbian, and Linux-derivatives for ARM64 Allwinner/Sunxi (Orange Pi, Banana Pi, etc.) processors and boards.

SPI-flash firmware image builder (for sunxi Orange Pi Zero, another sunxi boards maybe work too )

Open SBC module based on Allwinner V3s processor

TRACE32-Scripts is a collection of board specific TRACE32 .cmm scripts(U-Boot/Linux via RNDIS)

Lichee RV D1 Kernel and U-Boot

Decompiled DDR memory init for Allwinner Tech T113-s3 SoC

Yet another Allwinner FEL Toolkit

A full function(PULL-UP, PULL-DOWN) generic GPIO driver for Allwinner SoCs.