USB: don't let errors prevent system sleep

This patch (as1464) implements the recommended policy that most errors
during suspend or hibernation should not prevent the system from going
to sleep.  In particular, failure to suspend a USB driver or a USB
device should not prevent the sleep from succeeding:

Failure to suspend a device won't matter, because the device will
automatically go into suspend mode when the USB bus stops carrying
packets.  (This might be less true for USB-3.0 devices, but let's not
worry about them now.)

Failure of a driver to suspend might lead to trouble later on when the
system wakes up, but it isn't sufficient reason to prevent the system
from going to sleep.

Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

drivers/usb/core/driver.c

@@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 		for (i = n - 1; i >= 0; --i) {
 			intf = udev->actconfig->interface[i];
 			status = usb_suspend_interface(udev, intf, msg);
+
+			/* Ignore errors during system sleep transitions */
+			if (!(msg.event & PM_EVENT_AUTO))
+				status = 0;
 			if (status != 0)
 				break;
 		}
 	}
-	if (status == 0)
+	if (status == 0) {
 		status = usb_suspend_device(udev, msg);
 
+		/* Again, ignore errors during system sleep transitions */
+		if (!(msg.event & PM_EVENT_AUTO))
+			status = 0;
+	}
+
 	/* If the suspend failed, resume interfaces that did get suspended */
 	if (status != 0) {
 		msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);