scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is …

…detected

A mailbox timeout error usually indicates something has gone wrong, and a
follow up reset of the HBA is a typical recovery mechanism.  Introduce a
MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS
commands if the MBX_TMO_ERR flag condition was set.  This ensures all of
the registered SGL resources meant for ELS traffic are not leaked after an
HBA reset.

Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>

drivers/scsi/lpfc/lpfc.h

@@ -872,6 +872,7 @@ enum lpfc_irq_chann_mode {
 enum lpfc_hba_bit_flags {
 	FABRIC_COMANDS_BLOCKED,
 	HBA_PCI_ERR,
+	MBX_TMO_ERR,
 };
 
 struct lpfc_hba {

drivers/scsi/lpfc/lpfc_els.c

@@ -9603,11 +9603,13 @@ void
 lpfc_els_flush_cmd(struct lpfc_vport *vport)
 {
 	LIST_HEAD(abort_list);
+	LIST_HEAD(cancel_list);
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_iocbq *tmp_iocb, *piocb;
 	u32 ulp_command;
 	unsigned long iflags = 0;
+	bool mbx_tmo_err;
 
 	lpfc_fabric_abort_vport(vport);
 
@@ -9629,15 +9631,16 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		spin_lock(&pring->ring_lock);
 
+	mbx_tmo_err = test_bit(MBX_TMO_ERR, &phba->bit_flags);
 	/* First we need to issue aborts to outstanding cmds on txcmpl */
 	list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) {
-		if (piocb->cmd_flag & LPFC_IO_LIBDFC)
+		if (piocb->cmd_flag & LPFC_IO_LIBDFC && !mbx_tmo_err)
 			continue;
 
 		if (piocb->vport != vport)
 			continue;
 
-		if (piocb->cmd_flag & LPFC_DRIVER_ABORTED)
+		if (piocb->cmd_flag & LPFC_DRIVER_ABORTED && !mbx_tmo_err)
 			continue;
 
 		/* On the ELS ring we can have ELS_REQUESTs or
@@ -9656,8 +9659,8 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 			 */
 			if (phba->link_state == LPFC_LINK_DOWN)
 				piocb->cmd_cmpl = lpfc_cmpl_els_link_down;
-		}
-		if (ulp_command == CMD_GEN_REQUEST64_CR)
+		} else if (ulp_command == CMD_GEN_REQUEST64_CR ||
+			   mbx_tmo_err)
 			list_add_tail(&piocb->dlist, &abort_list);
 	}
 
@@ -9669,11 +9672,19 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 	list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
 		list_del_init(&piocb->dlist);
-		lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
+		if (mbx_tmo_err)
+			list_move_tail(&piocb->list, &cancel_list);
+		else
+			lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
+
 		spin_unlock_irqrestore(&phba->hbalock, iflags);
 	}
-	/* Make sure HBA is alive */
-	lpfc_issue_hb_tmo(phba);
+	if (!list_empty(&cancel_list))
+		lpfc_sli_cancel_iocbs(phba, &cancel_list, IOSTAT_LOCAL_REJECT,
+				      IOERR_SLI_ABORTED);
+	else
+		/* Make sure HBA is alive */
+		lpfc_issue_hb_tmo(phba);
 
 	if (!list_empty(&abort_list))
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,

drivers/scsi/lpfc/lpfc_init.c

@@ -7550,6 +7550,8 @@ lpfc_disable_pci_dev(struct lpfc_hba *phba)
 void
 lpfc_reset_hba(struct lpfc_hba *phba)
 {
+	int rc = 0;
+
 	/* If resets are disabled then set error state and return. */
 	if (!phba->cfg_enable_hba_reset) {
 		phba->link_state = LPFC_HBA_ERROR;
@@ -7560,13 +7562,25 @@ lpfc_reset_hba(struct lpfc_hba *phba)
 	if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) {
 		lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	} else {
+		if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) {
+			/* Perform a PCI function reset to start from clean */
+			rc = lpfc_pci_function_reset(phba);
+			lpfc_els_flush_all_cmd(phba);
+		}
 		lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
 		lpfc_sli_flush_io_rings(phba);
 	}
 	lpfc_offline(phba);
-	lpfc_sli_brdrestart(phba);
-	lpfc_online(phba);
-	lpfc_unblock_mgmt_io(phba);
+	clear_bit(MBX_TMO_ERR, &phba->bit_flags);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"8888 PCI function reset failed rc %x\n",
+				rc);
+	} else {
+		lpfc_sli_brdrestart(phba);
+		lpfc_online(phba);
+		lpfc_unblock_mgmt_io(phba);
+	}
 }
 
 /**

drivers/scsi/lpfc/lpfc_sli.c

@@ -3935,6 +3935,8 @@ void lpfc_poll_eratt(struct timer_list *t)
 	uint64_t sli_intr, cnt;
 
 	phba = from_timer(phba, t, eratt_poll);
+	if (!(phba->hba_flag & HBA_SETUP))
+		return;
 
 	/* Here we will also keep track of interrupts per sec of the hba */
 	sli_intr = phba->sli.slistat.sli_intr;
@@ -7693,7 +7695,9 @@ lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba,
 		spin_unlock_irq(&phba->hbalock);
 	} else {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"3161 Failure to post sgl to port.\n");
+				"3161 Failure to post sgl to port,status %x "
+				"blkcnt %d totalcnt %d postcnt %d\n",
+				status, block_cnt, total_cnt, post_cnt);
 		return -EIO;
 	}
 
@@ -8478,6 +8482,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 			spin_unlock_irq(&phba->hbalock);
 		}
 	}
+	phba->hba_flag &= ~HBA_SETUP;
 
 	lpfc_sli4_dip(phba);
 
@@ -9282,6 +9287,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	 * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
 	 * it to fail all outstanding SCSI IO.
 	 */
+	set_bit(MBX_TMO_ERR, &phba->bit_flags);
 	spin_lock_irq(&phba->pport->work_port_lock);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
 	spin_unlock_irq(&phba->pport->work_port_lock);