Clean up minor warnings from LGTM.com (esp8266#7500)

* Clean up minor warnings from LGTM.com

LGTM (Semmie) is a tool, bought by GitHub last year, that conducts basic
linting tasks on code and HTML.

Clean up the warnings identified in the latest report:
https://lgtm.com/projects/g/esp8266/Arduino/?mode=list

No functionality should change, however this may fix some issues with
the perl utilities not exiting properly on a Ctrl-C from the command
line.

* Back out HTML changes and rerun boards.txt.py

doc/boards.rst

@@ -476,6 +476,6 @@ DOIT ESP-Mx DevKit (ESP8285)
 ----------------------------
 
 DOIT ESP-Mx DevKit - This is a development board by DOIT, with a DOIT ESP-Mx module (`datasheet <https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8285---ESP-M2>`__) using a ESP8285 Chip. With the DOIT ESP-Mx module, GPIO pins 9 and 10 are not available. The DOIT ESP-Mx DevKit board has a red power LED and a blue LED connected to GPIO16 and is active low to turn on. It uses a CH340C, USB to Serial converter chip. 
-ESP8285 (`datasheet <http://www.espressif.com/sites/default/files/0a-esp8285_datasheet_en_v1.0_20160422.pdf>`__) is a multi-chip package which contains ESP8266 and 1MB flash. 
 
+ESP8285 (`datasheet <http://www.espressif.com/sites/default/files/0a-esp8285_datasheet_en_v1.0_20160422.pdf>`__) is a multi-chip package which contains ESP8266 and 1MB flash. 
 

libraries/ESP8266WiFi/examples/BearSSL_CertStore/certs-from-mozilla.py

@@ -1,4 +1,4 @@
-#!/usr/bin/python3
+#!/usr/bin/env python3
 
 # This script pulls the list of Mozilla trusted certificate authorities
 # from the web at the "mozurl" below, parses the file to grab the PEM
@@ -14,11 +14,11 @@
 from subprocess import Popen, PIPE, call
 try:
     from urllib.request import urlopen
-except:
+except Exception:
     from urllib2 import urlopen
 try:
     from StringIO import StringIO
-except:
+except Exception:
     from io import StringIO
 
 # Mozilla's URL for the CSV file with included PEM certs
@@ -42,7 +42,7 @@
 # Try and make ./data, skip if present
 try:
     os.mkdir("data")
-except:
+except Exception:
     pass
 
 derFiles = []

package/upload_release.py

@@ -2,11 +2,6 @@
 
 from github import Github
 import argparse
-import collections
-import glob
-import json
-import mimetypes
-import os
 
 parser = argparse.ArgumentParser(description='Upload a set of files to a new draft release')
 parser.add_argument('--user', help="Github username", type=str, required=True)

tools/boards.txt.py

@@ -907,23 +907,23 @@
             '1M',
             ],
         'desc': [
-            'ESP8266 based devices from ITEAD: Sonoff SV, Sonoff TH, Sonoff Basic, '
+            'ESP8266 based devices from ITEAD: Sonoff SV, Sonoff TH, Sonoff Basic, ' +
             'and Sonoff S20',
             '',
-            'These are not development boards. The development process is '
-            'inconvenient with these devices. When flashing firmware you will '
+            'These are not development boards. The development process is ' +
+            'inconvenient with these devices. When flashing firmware you will ' +
             'need a Serial Adapter to connect it to your computer.',
             '',
-            ' | Most of these devices, during normal operation, are connected to '
-            '*wall power (AKA Mains Electricity)*. **NEVER** try to flash these '
-            'devices when connected to *wall power*. **ALWAYS** have them '
-            'disconnected from *wall power* when connecting them to your '
+            ' | Most of these devices, during normal operation, are connected to ' +
+            '*wall power (AKA Mains Electricity)*. **NEVER** try to flash these ' +
+            'devices when connected to *wall power*. **ALWAYS** have them ' +
+            'disconnected from *wall power* when connecting them to your ' +
             'computer. Your life may depend on it!',
             '',
-            'When flashing you will need to hold down the push button connected '
-            'to the GPIO0 pin, while powering up with a safe 3.3 Volt source. Some USB '
-            'Serial Adapters may supply enough power to handle flashing; '
-            'however, it many may not supply enough power to handle the '
+            'When flashing you will need to hold down the push button connected ' +
+            'to the GPIO0 pin, while powering up with a safe 3.3 Volt source. Some USB ' +
+            'Serial Adapters may supply enough power to handle flashing; ' +
+            'however, it many may not supply enough power to handle the ' +
             'activities when the device reboots.',
             '',
             'More product details at the bottom of https://www.itead.cc/wiki/Product/'
@@ -943,15 +943,14 @@
             '1M',
             ],
         'desc': [
-            'DOIT ESP-Mx DevKit - This is a development board by DOIT, with a DOIT ESP-Mx module '
-            '(`datasheet <https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8285---ESP-M2>`__) '
-            'using a ESP8285 Chip. With the DOIT ESP-Mx module, GPIO pins 9 and 10 are not available. '
-            'The DOIT ESP-Mx DevKit board has a red power LED and a blue LED connected to GPIO16 '
-            'and is active low to turn on. It uses a CH340C, USB to Serial converter chip. '
-            '',
-            'ESP8285 (`datasheet <http://www.espressif.com/sites/default/files/0a-esp8285_datasheet_en_v1.0_20160422.pdf>`__) '
-            'is a multi-chip package which contains ESP8266 and 1MB flash. ',
+            'DOIT ESP-Mx DevKit - This is a development board by DOIT, with a DOIT ESP-Mx module ' +
+            '(`datasheet <https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8285---ESP-M2>`__) ' +
+            'using a ESP8285 Chip. With the DOIT ESP-Mx module, GPIO pins 9 and 10 are not available. ' +
+            'The DOIT ESP-Mx DevKit board has a red power LED and a blue LED connected to GPIO16 ' +
+            'and is active low to turn on. It uses a CH340C, USB to Serial converter chip. ',
             '',
+            'ESP8285 (`datasheet <http://www.espressif.com/sites/default/files/0a-esp8285_datasheet_en_v1.0_20160422.pdf>`__) ' +
+            'is a multi-chip package which contains ESP8266 and 1MB flash. '
         ],
 
     })

tools/elf2bin.py

@@ -57,7 +57,7 @@ def get_segment_size_addr(elf, segment, path):
 def read_segment(elf, segment, path):
     fd, tmpfile = tempfile.mkstemp()
     os.close(fd)
-    p = subprocess.check_call([path + "/xtensa-lx106-elf-objcopy", '-O', 'binary', '--only-section=' + segment, elf, tmpfile], stdout=subprocess.PIPE)
+    subprocess.check_call([path + "/xtensa-lx106-elf-objcopy", '-O', 'binary', '--only-section=' + segment, elf, tmpfile], stdout=subprocess.PIPE)
     with open(tmpfile, "rb") as f:
         raw = f.read()
     os.remove(tmpfile)
@@ -85,7 +85,7 @@ def write_bin(out, args, elf, segments, to_addr):
         try:
             for data in raw:
                 checksum = checksum ^ ord(data)
-        except:
+        except Exception:
             for data in raw:
                 checksum = checksum ^ data
     total_size += 1

tools/espota.py

@@ -77,7 +77,7 @@ def serve(remoteAddr, localAddr, remotePort, localPort, password, filename, comm
   try:
     sock.bind(server_address)
     sock.listen(1)
-  except:
+  except Exception:
     logging.error("Listen Failed")
     return 1
 
@@ -100,11 +100,11 @@ def serve(remoteAddr, localAddr, remotePort, localPort, password, filename, comm
   logging.info('Sending invitation to: %s', remoteAddr)
   sock2 = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
   remote_address = (remoteAddr, int(remotePort))
-  sent = sock2.sendto(message.encode(), remote_address)
+  sock2.sendto(message.encode(), remote_address)
   sock2.settimeout(10)
   try:
     data = sock2.recv(128).decode()
-  except:
+  except Exception:
     logging.error('No Answer')
     sock2.close()
     return 1
@@ -123,7 +123,7 @@ def serve(remoteAddr, localAddr, remotePort, localPort, password, filename, comm
       sock2.settimeout(10)
       try:
         data = sock2.recv(32).decode()
-      except:
+      except Exception:
         sys.stderr.write('FAIL\n')
         logging.error('No Answer to our Authentication')
         sock2.close()
@@ -147,7 +147,7 @@ def serve(remoteAddr, localAddr, remotePort, localPort, password, filename, comm
     connection, client_address = sock.accept()
     sock.settimeout(None)
     connection.settimeout(None)
-  except:
+  except Exception:
     logging.error('No response from device')
     sock.close()
     return 1
@@ -173,7 +173,7 @@ def serve(remoteAddr, localAddr, remotePort, localPort, password, filename, comm
         if connection.recv(32).decode().find('O') >= 0:
           # connection will receive only digits or 'OK'
           received_ok = True
-      except:
+      except Exception:
         sys.stderr.write('\n')
         logging.error('Error Uploading')
         connection.close()
@@ -207,7 +207,7 @@ def serve(remoteAddr, localAddr, remotePort, localPort, password, filename, comm
       if received_ok:
         return 0
       return 1
-    except:
+    except Exception:
       logging.error('No Result!')
       connection.close()
       f.close()

tools/makecorever.py

@@ -32,7 +32,7 @@ def git(*args):
     try:
         git_ver = git("rev-parse", "--short=8", "HEAD")
         git_desc = git("describe", "--tags")
-    except:
+    except Exception:
         pass
 
     text = "#define ARDUINO_ESP8266_GIT_VER 0x{}\n".format(git_ver)
@@ -43,7 +43,7 @@ def git(*args):
             old_text = inp.read()
         if old_text == text:
             return
-    except:
+    except Exception:
         pass
 
     with open(path, "w") as out:
@@ -73,7 +73,7 @@ def git(*args):
     include_dir = os.path.join(args.build_path, args.include_dir)
     try:
         os.makedirs(include_dir)
-    except:
+    except Exception:
         pass
 
     generate(

tools/signing.py

@@ -78,7 +78,6 @@ def main():
             f.write(val)
         return 0
     elif args.mode == "sign":
-        val = ""
         if not os.path.isfile(args.privatekey):
             return
         try:

tools/upload.py

@@ -16,7 +16,7 @@
     sys.path.insert(0, toolspath + "/pyserial") # Add pyserial dir to search path
     sys.path.insert(0, toolspath + "/esptool") # Add esptool dir to search path
     import esptool # If this fails, we can't continue and will bomb below
-except:
+except Exception:
     sys.stderr.write("pyserial or esptool directories not found next to this upload.py tool.\n")
     sys.exit(1)