Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
    Kivilinna.

 2) Fix loss of RTT samples in rxrpc, from David Howells.

 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.

 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.

 5) We disable BH for too lokng in sctp_get_port_local(), add a
    cond_resched() here as well, from Xin Long.

 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.

 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
    Yonghong Song.

 8) Missing of_node_put() in mt7530 DSA driver, from Sumera
    Priyadarsini.

 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.

10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.

11) Memory leak in rxkad_verify_response, from Dinghao Liu.

12) In tipc, don't use smp_processor_id() in preemptible context. From
    Tuong Lien.

13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.

14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.

15) Fix ABI mismatch between driver and firmware in nfp, from Louis
    Peens.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
  net/smc: fix sock refcounting in case of termination
  net/smc: reset sndbuf_desc if freed
  net/smc: set rx_off for SMCR explicitly
  net/smc: fix toleration of fake add_link messages
  tg3: Fix soft lockup when tg3_reset_task() fails.
  doc: net: dsa: Fix typo in config code sample
  net: dp83867: Fix WoL SecureOn password
  nfp: flower: fix ABI mismatch between driver and firmware
  tipc: fix shutdown() of connectionless socket
  ipv6: Fix sysctl max for fib_multipath_hash_policy
  drivers/net/wan/hdlc: Change the default of hard_header_len to 0
  net: gemini: Fix another missing clk_disable_unprepare() in probe
  net: bcmgenet: fix mask check in bcmgenet_validate_flow()
  amd-xgbe: Add support for new port mode
  net: usb: dm9601: Add USB ID of Keenetic Plus DSL
  vhost: fix typo in error message
  net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
  pktgen: fix error message with wrong function name
  net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
  cxgb4: fix thermal zone device registration
  ...

Documentation/devicetree/bindings/net/dsa/dsa.txt

@@ -1,4 +1,4 @@
 Distributed Switch Architecture Device Tree Bindings
 ----------------------------------------------------
 
-See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
+See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.

Documentation/networking/dsa/configuration.rst

@@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup.
 
   # bring up the slave interfaces
   ip link set lan1 up
-  ip link set lan1 up
+  ip link set lan2 up
   ip link set lan3 up
 
   # create bridge

MAINTAINERS

@@ -3389,6 +3389,7 @@ M:	Florian Fainelli <[email protected]>
 L:	[email protected]
 L:	[email protected] (subscribers-only)
 S:	Supported
+F:	Documentation/devicetree/bindings/net/dsa/b53.txt
 F:	drivers/net/dsa/b53/*
 F:	include/linux/platform_data/b53.h
 
@@ -3574,13 +3575,28 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/phy/broadcom/phy-brcm-usb*
 
+BROADCOM ETHERNET PHY DRIVERS
+M:	Florian Fainelli <[email protected]>
+L:	[email protected]
+L:	[email protected]
+S:	Supported
+F:	Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
+F:	drivers/net/phy/bcm*.[ch]
+F:	drivers/net/phy/broadcom.c
+F:	include/linux/brcmphy.h
+
 BROADCOM GENET ETHERNET DRIVER
 M:	Doug Berger <[email protected]>
 M:	Florian Fainelli <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Supported
+F:	Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+F:	Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
 F:	drivers/net/ethernet/broadcom/genet/
+F:	drivers/net/mdio/mdio-bcm-unimac.c
+F:	include/linux/platform_data/bcmgenet.h
+F:	include/linux/platform_data/mdio-bcm-unimac.h
 
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <[email protected]>
@@ -6496,7 +6512,6 @@ F:	net/bridge/
 
 ETHERNET PHY LIBRARY
 M:	Andrew Lunn <[email protected]>
-M:	Florian Fainelli <[email protected]>
 M:	Heiner Kallweit <[email protected]>
 R:	Russell King <[email protected]>
 L:	[email protected]

drivers/atm/firestream.c

@@ -998,6 +998,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 				error = make_rate (pcr, r, &tmc0, NULL);
 				if (error) {
 					kfree(tc);
+					kfree(vcc);
 					return error;
 				}
 			}

drivers/net/dsa/mt7530.c

@@ -1326,14 +1326,17 @@ mt7530_setup(struct dsa_switch *ds)
 
 			if (phy_node->parent == priv->dev->of_node->parent) {
 				ret = of_get_phy_mode(mac_np, &interface);
-				if (ret && ret != -ENODEV)
+				if (ret && ret != -ENODEV) {
+					of_node_put(mac_np);
 					return ret;
+				}
 				id = of_mdio_parse_addr(ds->dev, phy_node);
 				if (id == 0)
 					priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
 				if (id == 4)
 					priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
 			}
+			of_node_put(mac_np);
 			of_node_put(phy_node);
 			break;
 		}
@@ -1501,7 +1504,7 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
 		phylink_set(mask, 100baseT_Full);
 
 		if (state->interface != PHY_INTERFACE_MODE_MII) {
-			phylink_set(mask, 1000baseT_Half);
+			/* This switch only supports 1G full-duplex. */
 			phylink_set(mask, 1000baseT_Full);
 			if (port == 5)
 				phylink_set(mask, 1000baseX_Full);

drivers/net/dsa/ocelot/felix.c

@@ -400,6 +400,7 @@ static int felix_parse_ports_node(struct felix *felix,
 		if (err < 0) {
 			dev_err(dev, "Unsupported PHY mode %s on port %d\n",
 				phy_modes(phy_mode), port);
+			of_node_put(child);
 			return err;
 		}
 

drivers/net/dsa/sja1105/sja1105_main.c

@@ -3415,7 +3415,7 @@ static int sja1105_check_device_id(struct sja1105_private *priv)
 
 	sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID);
 
-	for (match = sja1105_dt_ids; match->compatible; match++) {
+	for (match = sja1105_dt_ids; match->compatible[0]; match++) {
 		const struct sja1105_info *info = match->data;
 
 		/* Is what's been probed in our match table at all? */

drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c

@@ -166,6 +166,7 @@ enum xgbe_port_mode {
 	XGBE_PORT_MODE_10GBASE_T,
 	XGBE_PORT_MODE_10GBASE_R,
 	XGBE_PORT_MODE_SFP,
+	XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG,
 	XGBE_PORT_MODE_MAX,
 };
 
@@ -1634,6 +1635,7 @@ static enum xgbe_mode xgbe_phy_an73_redrv_outcome(struct xgbe_prv_data *pdata)
 	if (ad_reg & 0x80) {
 		switch (phy_data->port_mode) {
 		case XGBE_PORT_MODE_BACKPLANE:
+		case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 			mode = XGBE_MODE_KR;
 			break;
 		default:
@@ -1643,6 +1645,7 @@ static enum xgbe_mode xgbe_phy_an73_redrv_outcome(struct xgbe_prv_data *pdata)
 	} else if (ad_reg & 0x20) {
 		switch (phy_data->port_mode) {
 		case XGBE_PORT_MODE_BACKPLANE:
+		case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 			mode = XGBE_MODE_KX_1000;
 			break;
 		case XGBE_PORT_MODE_1000BASE_X:
@@ -1782,6 +1785,7 @@ static void xgbe_phy_an_advertising(struct xgbe_prv_data *pdata,
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		XGBE_SET_ADV(dlks, 10000baseKR_Full);
 		break;
 	case XGBE_PORT_MODE_BACKPLANE_2500:
@@ -1874,6 +1878,7 @@ static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata)
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
 		return XGBE_AN_MODE_CL73;
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 	case XGBE_PORT_MODE_BACKPLANE_2500:
 		return XGBE_AN_MODE_NONE;
 	case XGBE_PORT_MODE_1000BASE_T:
@@ -2156,6 +2161,7 @@ static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		return xgbe_phy_switch_bp_mode(pdata);
 	case XGBE_PORT_MODE_BACKPLANE_2500:
 		return xgbe_phy_switch_bp_2500_mode(pdata);
@@ -2251,6 +2257,7 @@ static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		return xgbe_phy_get_bp_mode(speed);
 	case XGBE_PORT_MODE_BACKPLANE_2500:
 		return xgbe_phy_get_bp_2500_mode(speed);
@@ -2426,6 +2433,7 @@ static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		return xgbe_phy_use_bp_mode(pdata, mode);
 	case XGBE_PORT_MODE_BACKPLANE_2500:
 		return xgbe_phy_use_bp_2500_mode(pdata, mode);
@@ -2515,6 +2523,7 @@ static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		return xgbe_phy_valid_speed_bp_mode(speed);
 	case XGBE_PORT_MODE_BACKPLANE_2500:
 		return xgbe_phy_valid_speed_bp_2500_mode(speed);
@@ -2792,6 +2801,7 @@ static bool xgbe_phy_port_mode_mismatch(struct xgbe_prv_data *pdata)
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) ||
 		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000))
 			return false;
@@ -2844,6 +2854,7 @@ static bool xgbe_phy_conn_type_mismatch(struct xgbe_prv_data *pdata)
 
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 	case XGBE_PORT_MODE_BACKPLANE_2500:
 		if (phy_data->conn_type == XGBE_CONN_TYPE_BACKPLANE)
 			return false;
@@ -3160,6 +3171,8 @@ static int xgbe_phy_init(struct xgbe_prv_data *pdata)
 	/* Backplane support */
 	case XGBE_PORT_MODE_BACKPLANE:
 		XGBE_SET_SUP(lks, Autoneg);
+		fallthrough;
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
 		XGBE_SET_SUP(lks, Pause);
 		XGBE_SET_SUP(lks, Asym_Pause);
 		XGBE_SET_SUP(lks, Backplane);

drivers/net/ethernet/arc/emac_mdio.c

@@ -153,6 +153,7 @@ int arc_mdio_probe(struct arc_emac_priv *priv)
 	if (IS_ERR(data->reset_gpio)) {
 		error = PTR_ERR(data->reset_gpio);
 		dev_err(priv->dev, "Failed to request gpio: %d\n", error);
+		mdiobus_free(bus);
 		return error;
 	}
 

drivers/net/ethernet/broadcom/bcmsysport.c

@@ -2491,8 +2491,10 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 	priv->tx_rings = devm_kcalloc(&pdev->dev, txq,
 				      sizeof(struct bcm_sysport_tx_ring),
 				      GFP_KERNEL);
-	if (!priv->tx_rings)
-		return -ENOMEM;
+	if (!priv->tx_rings) {
+		ret = -ENOMEM;
+		goto err_free_netdev;
+	}
 
 	priv->is_lite = params->is_lite;
 	priv->num_rx_desc_words = params->num_rx_desc_words;