Merge ra.kernel.org:/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Add selftest for nft_synproxy, from Florian Westphal.

2) xt_socket destroy path incorrectly disables IPv4 defrag for
   IPv6 traffic (typo), from Eric Dumazet.

3) Fix exit value selftest nft_concat_range.sh, from Hangbin Liu.

4) nft_synproxy disables the IPv4 hooks if the IPv6 hooks fail
   to be registered.

5) disable rp_filter on router in selftest nft_fib.sh, also
   from Hangbin Liu.
====================

Signed-off-by: David S. Miller <[email protected]>

net/netfilter/nft_synproxy.c

@@ -191,8 +191,10 @@ static int nft_synproxy_do_init(const struct nft_ctx *ctx,
 		if (err)
 			goto nf_ct_failure;
 		err = nf_synproxy_ipv6_init(snet, ctx->net);
-		if (err)
+		if (err) {
+			nf_synproxy_ipv4_fini(snet, ctx->net);
 			goto nf_ct_failure;
+		}
 		break;
 	}
 

net/netfilter/xt_socket.c

@@ -221,7 +221,7 @@ static void socket_mt_destroy(const struct xt_mtdtor_param *par)
 	if (par->family == NFPROTO_IPV4)
 		nf_defrag_ipv4_disable(par->net);
 	else if (par->family == NFPROTO_IPV6)
-		nf_defrag_ipv4_disable(par->net);
+		nf_defrag_ipv6_disable(par->net);
 }
 
 static struct xt_match socket_mt_reg[] __read_mostly = {

tools/testing/selftests/netfilter/Makefile

@@ -6,7 +6,7 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
 	nft_concat_range.sh nft_conntrack_helper.sh \
 	nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
 	ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \
-	conntrack_vrf.sh
+	conntrack_vrf.sh nft_synproxy.sh
 
 LDLIBS = -lmnl
 TEST_GEN_FILES =  nf-queue

tools/testing/selftests/netfilter/nft_concat_range.sh

@@ -1601,4 +1601,4 @@ for name in ${TESTS}; do
 	done
 done
 
-[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP}
+[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP} || exit 0

tools/testing/selftests/netfilter/nft_fib.sh

@@ -174,6 +174,7 @@ test_ping() {
 ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
 ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.rp_filter=0 > /dev/null
 
 sleep 3
 

tools/testing/selftests/netfilter/nft_synproxy.sh

@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+rnd=$(mktemp -u XXXXXXXX)
+nsr="nsr-$rnd"	# synproxy machine
+ns1="ns1-$rnd"  # iperf client
+ns2="ns2-$rnd"  # iperf server
+
+checktool (){
+	if ! $1 > /dev/null 2>&1; then
+		echo "SKIP: Could not $2"
+		exit $ksft_skip
+	fi
+}
+
+checktool "nft --version" "run test without nft tool"
+checktool "ip -Version" "run test without ip tool"
+checktool "iperf3 --version" "run test without iperf3"
+checktool "ip netns add $nsr" "create net namespace"
+
+modprobe -q nf_conntrack
+
+ip netns add $ns1
+ip netns add $ns2
+
+cleanup() {
+	ip netns pids $ns1 | xargs kill 2>/dev/null
+	ip netns pids $ns2 | xargs kill 2>/dev/null
+	ip netns del $ns1
+	ip netns del $ns2
+
+	ip netns del $nsr
+}
+
+trap cleanup EXIT
+
+ip link add veth0 netns $nsr type veth peer name eth0 netns $ns1
+ip link add veth1 netns $nsr type veth peer name eth0 netns $ns2
+
+for dev in lo veth0 veth1; do
+ip -net $nsr link set $dev up
+done
+
+ip -net $nsr addr add 10.0.1.1/24 dev veth0
+ip -net $nsr addr add 10.0.2.1/24 dev veth1
+
+ip netns exec $nsr sysctl -q net.ipv4.conf.veth0.forwarding=1
+ip netns exec $nsr sysctl -q net.ipv4.conf.veth1.forwarding=1
+ip netns exec $nsr sysctl -q net.netfilter.nf_conntrack_tcp_loose=0
+
+for n in $ns1 $ns2; do
+  ip -net $n link set lo up
+  ip -net $n link set eth0 up
+done
+ip -net $ns1 addr add 10.0.1.99/24 dev eth0
+ip -net $ns2 addr add 10.0.2.99/24 dev eth0
+ip -net $ns1 route add default via 10.0.1.1
+ip -net $ns2 route add default via 10.0.2.1
+
+# test basic connectivity
+if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
+  echo "ERROR: $ns1 cannot reach $ns2" 1>&2
+  exit 1
+fi
+
+if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then
+  echo "ERROR: $ns2 cannot reach $ns1" 1>&2
+  exit 1
+fi
+
+ip netns exec $ns2 iperf3 -s > /dev/null 2>&1 &
+# ip netns exec $nsr tcpdump -vvv -n -i veth1 tcp | head -n 10 &
+
+sleep 1
+
+ip netns exec $nsr nft -f - <<EOF
+table inet filter {
+   chain prerouting {
+      type filter hook prerouting priority -300; policy accept;
+      meta iif veth0 tcp flags syn counter notrack
+   }
+
+  chain forward {
+      type filter hook forward priority 0; policy accept;
+
+      ct state new,established counter accept
+
+      meta iif veth0 meta l4proto tcp ct state untracked,invalid synproxy mss 1460 sack-perm timestamp
+
+      ct state invalid counter drop
+
+      # make ns2 unreachable w.o. tcp synproxy
+      tcp flags syn counter drop
+   }
+}
+EOF
+if [ $? -ne 0 ]; then
+	echo "SKIP: Cannot add nft synproxy"
+	exit $ksft_skip
+fi
+
+ip netns exec $ns1 timeout 5 iperf3 -c 10.0.2.99 -n $((1 * 1024 * 1024)) > /dev/null
+
+if [ $? -ne 0 ]; then
+	echo "FAIL: iperf3 returned an error" 1>&2
+	ret=$?
+	ip netns exec $nsr nft list ruleset
+else
+	echo "PASS: synproxy connection successful"
+fi
+
+exit $ret