Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - removed support for PNX833x alias NXT_STB22x

 - included Ingenic SoC support into generic MIPS kernels

 - added support for new Ingenic SoCs

 - converted workaround selection to use Kconfig

 - replaced old boot mem functions by memblock_*

 - enabled COP2 usage in kernel for Loongson64 to make use
   of 16byte load/stores possible

 - cleanups and fixes

* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
  MIPS: DEC: Restore bootmem reservation for firmware working memory area
  MIPS: dec: fix section mismatch
  bcm963xx_tag.h: fix duplicated word
  mips: ralink: enable zboot support
  MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
  MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
  MIPS: cpu-probe: introduce exclusive R3k CPU probe
  MIPS: cpu-probe: move fpu probing/handling into its own file
  MIPS: replace add_memory_region with memblock
  MIPS: Loongson64: Clean up numa.c
  MIPS: Loongson64: Select SMP in Kconfig to avoid build error
  mips: octeon: Add Ubiquiti E200 and E220 boards
  MIPS: SGI-IP28: disable use of ll/sc in kernel
  MIPS: tx49xx: move tx4939_add_memory_regions into only user
  MIPS: pgtable: Remove used PAGE_USERIO define
  MIPS: alchemy: Share prom_init implementation
  MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
  MIPS: process: include exec.h header in process.c
  MIPS: process: Add prototype for function arch_dup_task_struct
  MIPS: idle: Add prototype for function check_wait
  ...

Documentation/devicetree/bindings/mips/ingenic/devices.yaml

@@ -47,4 +47,9 @@ properties:
         items:
           - const: yna,cu1830-neo
           - const: ingenic,x1830
+
+      - description: YSH & ATIL General Board, CU2000 Module with Neo Backplane
+        items:
+          - const: yna,cu2000-neo
+          - const: ingenic,x2000e
 ...

MAINTAINERS

@@ -8675,8 +8675,9 @@ INGENIC JZ47xx SoCs
 M:	Paul Cercueil <[email protected]>
 S:	Maintained
 F:	arch/mips/boot/dts/ingenic/
-F:	arch/mips/include/asm/mach-jz4740/
-F:	arch/mips/jz4740/
+F:	arch/mips/generic/board-ingenic.c
+F:	arch/mips/include/asm/mach-ingenic/
+F:	arch/mips/ingenic/Kconfig
 F:	drivers/clk/ingenic/
 F:	drivers/dma/dma-jz4780.c
 F:	drivers/gpu/drm/ingenic/

arch/mips/Kbuild.platforms

@@ -13,7 +13,6 @@ platform-$(CONFIG_MIPS_COBALT)		+= cobalt/
 platform-$(CONFIG_MACH_DECSTATION)	+= dec/
 platform-$(CONFIG_MIPS_GENERIC)		+= generic/
 platform-$(CONFIG_MACH_JAZZ)		+= jazz/
-platform-$(CONFIG_MACH_INGENIC)		+= jz4740/
 platform-$(CONFIG_LANTIQ)		+= lantiq/
 platform-$(CONFIG_MACH_LOONGSON2EF)	+= loongson2ef/
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
@@ -22,7 +21,6 @@ platform-$(CONFIG_MIPS_MALTA)		+= mti-malta/
 platform-$(CONFIG_NLM_COMMON)		+= netlogic/
 platform-$(CONFIG_PIC32MZDA)		+= pic32/
 platform-$(CONFIG_MACH_PISTACHIO)	+= pistachio/
-platform-$(CONFIG_SOC_PNX833X)		+= pnx833x/
 platform-$(CONFIG_RALINK)		+= ralink/
 platform-$(CONFIG_MIKROTIK_RB532)	+= rb532/
 platform-$(CONFIG_SGI_IP22)		+= sgi-ip22/

arch/mips/Kconfig

@@ -94,14 +94,34 @@ config MIPS
 config MIPS_FIXUP_BIGPHYS_ADDR
 	bool
 
+config MIPS_GENERIC
+	bool
+
+config MACH_INGENIC
+	bool
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_ZBOOT
+	select DMA_NONCOHERENT
+	select IRQ_MIPS_CPU
+	select PINCTRL
+	select GPIOLIB
+	select COMMON_CLK
+	select GENERIC_IRQ_CHIP
+	select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
+	select USE_OF
+	select CPU_SUPPORTS_CPUFREQ
+	select MIPS_EXTERNAL_TIMER
+
 menu "Machine selection"
 
 choice
 	prompt "System type"
-	default MIPS_GENERIC
+	default MIPS_GENERIC_KERNEL
 
-config MIPS_GENERIC
+config MIPS_GENERIC_KERNEL
 	bool "Generic board-agnostic MIPS kernel"
+	select MIPS_GENERIC
 	select BOOT_RAW
 	select BUILTIN_DTB
 	select CEVT_R4K
@@ -138,6 +158,7 @@ config MIPS_GENERIC
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_RELOCATABLE
 	select SYS_SUPPORTS_SMARTMIPS
+	select SYS_SUPPORTS_ZBOOT
 	select UHI_BOOT
 	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
@@ -390,20 +411,11 @@ config MACH_JAZZ
 	  Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
 	  Olivetti M700-10 workstations.
 
-config MACH_INGENIC
+config MACH_INGENIC_SOC
 	bool "Ingenic SoC based machines"
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select MIPS_GENERIC
+	select MACH_INGENIC
 	select SYS_SUPPORTS_ZBOOT_UART16550
-	select CPU_SUPPORTS_HUGEPAGES
-	select DMA_NONCOHERENT
-	select IRQ_MIPS_CPU
-	select PINCTRL
-	select GPIOLIB
-	select COMMON_CLK
-	select GENERIC_IRQ_CHIP
-	select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
-	select USE_OF
 
 config LANTIQ
 	bool "Lantiq based platforms"
@@ -476,6 +488,7 @@ config MACH_LOONGSON64
 	select SYS_SUPPORTS_ZBOOT
 	select ZONE_DMA32
 	select NUMA
+	select SMP
 	select COMMON_CLK
 	select USE_OF
 	select BUILTIN_DTB
@@ -569,6 +582,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_VPE_LOADER
 	select SYS_SUPPORTS_ZBOOT
 	select USE_OF
+	select WAR_ICACHE_REFILLS
 	select ZONE_DMA32 if 64BIT
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
@@ -590,19 +604,6 @@ config MACH_VR41XX
 	select SYS_SUPPORTS_MIPS16
 	select GPIOLIB
 
-config NXP_STB220
-	bool "NXP STB220 board"
-	select SOC_PNX833X
-	help
-	  Support for NXP Semiconductors STB220 Development Board.
-
-config NXP_STB225
-	bool "NXP 225 board"
-	select SOC_PNX833X
-	select SOC_PNX8335
-	help
-	  Support for NXP Semiconductors STB225 Development Board.
-
 config RALINK
 	bool "Ralink based machines"
 	select CEVT_R4K
@@ -616,6 +617,7 @@ config RALINK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_ZBOOT
 	select SYS_HAS_EARLY_PRINTK
 	select CLKDEV_LOOKUP
 	select ARCH_HAS_RESET_CONTROLLER
@@ -652,6 +654,9 @@ config SGI_IP22
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select WAR_R4600_V1_INDEX_ICACHEOP
+	select WAR_R4600_V1_HIT_CACHEOP
+	select WAR_R4600_V2_HIT_CACHEOP
 	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
@@ -679,6 +684,7 @@ config SGI_IP27
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
+	select WAR_R10000_LLSC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NUMA
 	help
@@ -714,6 +720,7 @@ config SGI_IP28
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select WAR_R10000_LLSC
 	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  This is the SGI Indigo2 with R10000 processor.  To compile a Linux
@@ -740,6 +747,7 @@ config SGI_IP30
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_SMP
+	select WAR_R10000_LLSC
 	select MIPS_L1_CACHE_SHIFT_7
 	select ARC_MEMORY
 	help
@@ -767,6 +775,7 @@ config SGI_IP32
 	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select WAR_ICACHE_REFILLS
 	help
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
@@ -890,6 +899,7 @@ config SNI_RM
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select WAR_R4600_V2_HIT_CACHEOP
 	help
 	  The SNI RM200/300/400 are MIPS-based machines manufactured by
 	  Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
@@ -901,6 +911,7 @@ config MACH_TX39XX
 
 config MACH_TX49XX
 	bool "Toshiba TX49 series based machines"
+	select WAR_TX49XX_ICACHE_INDEX_INV
 
 config MIKROTIK_RB532
 	bool "Mikrotik RB532 boards"
@@ -1026,8 +1037,8 @@ source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/bmips/Kconfig"
 source "arch/mips/generic/Kconfig"
+source "arch/mips/ingenic/Kconfig"
 source "arch/mips/jazz/Kconfig"
-source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/pic32/Kconfig"
 source "arch/mips/pistachio/Kconfig"
@@ -1267,23 +1278,6 @@ config PCI_XTALK_BRIDGE
 config NO_EXCEPT_FILL
 	bool
 
-config SOC_PNX833X
-	bool
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_MIPS_CPU
-	select DMA_NONCOHERENT
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_MIPS16
-	select CPU_MIPSR2_IRQ_VI
-
-config SOC_PNX8335
-	bool
-	select SOC_PNX833X
-
 config MIPS_SPRAM
 	bool
 
@@ -1620,7 +1614,6 @@ config CPU_P5600
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_MSA
-	select CPU_SUPPORTS_UNCACHED_ACCELERATED
 	select CPU_SUPPORTS_CPUFREQ
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
@@ -1891,6 +1884,7 @@ config SYS_SUPPORTS_ZBOOT
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
+	select HAVE_KERNEL_ZSTD
 
 config SYS_SUPPORTS_ZBOOT_UART16550
 	bool
@@ -2272,7 +2266,7 @@ config FORCE_MAX_ZONEORDER
 	default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
 	range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
 	default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
-	range 11 64
+	range 0 64
 	default "11"
 	help
 	  The kernel memory allocator divides physically contiguous memory
@@ -2638,6 +2632,76 @@ config MIPS_ASID_BITS_VARIABLE
 config MIPS_CRC_SUPPORT
 	bool
 
+# R4600 erratum.  Due to the lack of errata information the exact
+# technical details aren't known.  I've experimentally found that disabling
+# interrupts during indexed I-cache flushes seems to be sufficient to deal
+# with the issue.
+config WAR_R4600_V1_INDEX_ICACHEOP
+	bool
+
+# Pleasures of the R4600 V1.x.  Cite from the IDT R4600 V1.7 errata:
+#
+#  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
+#      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+#      executed if there is no other dcache activity. If the dcache is
+#      accessed for another instruction immeidately preceding when these
+#      cache instructions are executing, it is possible that the dcache
+#      tag match outputs used by these cache instructions will be
+#      incorrect. These cache instructions should be preceded by at least
+#      four instructions that are not any kind of load or store
+#      instruction.
+#
+#      This is not allowed:    lw
+#                              nop
+#                              nop
+#                              nop
+#                              cache       Hit_Writeback_Invalidate_D
+#
+#      This is allowed:        lw
+#                              nop
+#                              nop
+#                              nop
+#                              nop
+#                              cache       Hit_Writeback_Invalidate_D
+config WAR_R4600_V1_HIT_CACHEOP
+	bool
+
+# Writeback and invalidate the primary cache dcache before DMA.
+#
+# R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+# Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+# operate correctly if the internal data cache refill buffer is empty.  These
+# CACHE instructions should be separated from any potential data cache miss
+# by a load instruction to an uncached address to empty the response buffer."
+# (Revision 2.0 device errata from IDT available on https://www.idt.com/
+# in .pdf format.)
+config WAR_R4600_V2_HIT_CACHEOP
+	bool
+
+# From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
+# the line which this instruction itself exists, the following
+# operation is not guaranteed."
+#
+# Workaround: do two phase flushing for Index_Invalidate_I
+config WAR_TX49XX_ICACHE_INDEX_INV
+	bool
+
+# The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
+# opposes it being called that) where invalid instructions in the same
+# I-cache line worth of instructions being fetched may case spurious
+# exceptions.
+config WAR_ICACHE_REFILLS
+	bool
+
+# On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that
+# may cause ll / sc and lld / scd sequences to execute non-atomically.
+config WAR_R10000_LLSC
+	bool
+
+# 34K core erratum: "Problems Executing the TLBR Instruction"
+config WAR_MIPS34K_MISSED_ITLB
+	bool
+
 #
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed

arch/mips/alchemy/Kconfig

@@ -1,12 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-# au1000-style gpio and interrupt controllers
-config ALCHEMY_GPIOINT_AU1000
-	bool
-
-# au1300-style GPIO/INT controller
-config ALCHEMY_GPIOINT_AU1300
-	bool
-
 choice
 	prompt "Machine type"
 	depends on MIPS_ALCHEMY
@@ -15,7 +7,6 @@ choice
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
 	select HAVE_PCI
-	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
@@ -33,13 +24,11 @@ config MIPS_DB1XXX
 
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
-	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_GPR
 	bool "Trapeze ITS GPR board"
-	select ALCHEMY_GPIOINT_AU1000
 	select HAVE_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK