scsi: isci: Pass gfp_t flags in isci_port_link_up()

Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

libsas sas_notify_port_event() is called from isci_port_link_up().  Below
is the context analysis for all of its call chains:

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
    -> port_config.c: sci_port_configuration_agent_initialize()
      -> sci_mpc_agent_validate_phy_configuration()
        -> port.c: sci_port_add_phy()
          -> sci_port_general_link_up_handler()
            -> sci_port_activate_phy()
              -> isci_port_link_up()

port_config.c: apc_agent_timeout(), atomic, timer callback      (*)
  -> sci_apc_agent_configure_ports()
    -> port.c: sci_port_add_phy()
      -> sci_port_general_link_up_handler()
        -> sci_port_activate_phy()
          -> isci_port_link_up()

phy.c: enter SCI state: *SCI_PHY_SUB_FINAL*                     # Cont. from [1]
  -> phy.c: sci_phy_starting_final_substate_enter()
    -> phy.c: sci_change_state(SCI_PHY_READY)
      -> enter SCI state: *SCI_PHY_READY*
        -> phy.c: sci_phy_ready_state_enter()
          -> host.c: sci_controller_link_up()
            -> .link_up_handler()
            == port_config.c: sci_apc_agent_link_up()
              -> port.c: sci_port_link_up()
                -> (continue at [A])
            == port_config.c: sci_mpc_agent_link_up()
	      -> port.c: sci_port_link_up()
                -> (continue at [A])

port_config.c: mpc_agent_timeout(), atomic, timer callback      (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> ->link_up_handler()
  == port_config.c: sci_apc_agent_link_up()
    -> port.c: sci_port_link_up()
      -> (continue at [A])
  == port_config.c: sci_mpc_agent_link_up()
    -> port.c: sci_port_link_up()
      -> (continue at [A])

[A] port.c: sci_port_link_up()
  -> sci_port_activate_phy()
    -> isci_port_link_up()
  -> sci_port_general_link_up_handler()
    -> sci_port_activate_phy()
      -> isci_port_link_up()

[1] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
-----------------------------------------------------------

host.c: power_control_timeout(), atomic, timer callback         (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> phy.c: sci_phy_consume_power_handler()
    -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_unsolicited_frame()
      -> phy.c: sci_phy_frame_handler()
        -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
          -> sci_phy_starting_await_sas_power_substate_enter()
            -> host.c: sci_controller_power_control_queue_insert()
              -> phy.c: sci_phy_consume_power_handler()
                -> sci_change_state(SCI_PHY_SUB_FINAL)
        -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> sci_phy_start_sata_link_training()
          -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
            -> sci_phy_starting_await_sata_power_substate_enter
              -> host.c: sci_controller_power_control_queue_insert()
                -> phy.c: sci_phy_consume_power_handler()
                  -> sci_change_state(SCI_PHY_SUB_FINAL)

As can be seen from the "(*)" markers above, all the call-chains are
atomic.  Pass GFP_ATOMIC to libsas port event notifier.

Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use.  This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.

Link: https://lore.kernel.org/r/[email protected]
Fixes: 1c393b9 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Artur Paszkiewicz <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

drivers/scsi/isci/port.c

@@ -223,7 +223,8 @@ static void isci_port_link_up(struct isci_host *isci_host,
 	/* Notify libsas that we have an address frame, if indeed
 	 * we've found an SSP, SMP, or STP target */
 	if (success)
-		sas_notify_port_event(&iphy->sas_phy, PORTE_BYTES_DMAED);
+		sas_notify_port_event_gfp(&iphy->sas_phy,
+					  PORTE_BYTES_DMAED, GFP_ATOMIC);
 }