Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big staging tree update for 4.12-rc1.

  It's a big one, adding about 350k new lines of crap^Wcode, mostly all
  in a big dump of media drivers from Intel. But there's other new
  drivers in here as well, yet-another-wifi driver, new IIO drivers, and
  a new crypto accelerator.

  We also deleted a bunch of stuff, mostly in patch cleanups, but also
  the Android ION code has shrunk a lot, and the Android low memory
  killer driver was finally deleted, much to the celebration of the -mm
  developers.

  All of these have been in linux-next with a few build issues that will
  show up when you merge to your tree"

Merge conflicts in the new rtl8723bs driver (due to the wifi changes
this merge window) handled as per linux-next, courtesy of Stephen
Rothwell.

* tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits)
  staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd
  staging: ks7010: remove line continuations in quoted strings
  staging: vt6656: use tabs instead of spaces
  staging: android: ion: Fix unnecessary initialization of static variable
  staging: media: atomisp: fix range checking on clk_num
  staging: media: atomisp: fix misspelled word in comment
  staging: media: atomisp: kmap() can't fail
  staging: atomisp: remove #ifdef for runtime PM functions
  staging: atomisp: satm include directory is gone
  atomisp: remove some more unused files
  atomisp: remove hmm_load/store/clear indirections
  atomisp: kill off mmgr_free
  atomisp: clean up the hmm init/cleanup indirections
  atomisp: handle allocation calls before init in the hmm layer
  staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver
  staging: fsl-dpaa2/eth: Add TODO file
  staging: fsl-dpaa2/eth: Add trace points
  staging: fsl-dpaa2/eth: Add driver specific stats
  staging: fsl-dpaa2/eth: Add ethtool support
  staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver
  ...

.mailmap

@@ -111,6 +111,7 @@ Mauro Carvalho Chehab <[email protected]> <[email protected]>
 Mauro Carvalho Chehab <[email protected]> <[email protected]>
 Matt Ranostay <[email protected]> Matthew Ranostay <[email protected]>
 Matt Ranostay <[email protected]> <[email protected]>
+Matt Ranostay <[email protected]> <[email protected]>
 Mayuresh Janorkar <[email protected]>
 Michael Buesch <[email protected]>
 Michel Dänzer <[email protected]>

Documentation/ABI/testing/sysfs-bus-iio

@@ -55,6 +55,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
 KernelVersion:	2.6.35
@@ -1593,18 +1594,32 @@ Description:
 		can be processed to siemens per meter.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Raw counter device counts from channel Y. For quadrature
 		counters, multiplication by an available [Y]_scale results in
 		the counts of a single quadrature signal phase from channel Y.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Raw counter device index value from channel Y. This attribute
 		provides an absolute positional reference (e.g. a pulse once per
 		revolution) which may be used to home positional systems as
 		required.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		A list of possible counting directions which are:
+		- "up"	: counter device is increasing.
+		- "down": counter device is decreasing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Raw counter device counters direction for channel Y.

Documentation/ABI/testing/sysfs-bus-iio-adc-max9611

@@ -0,0 +1,17 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	[email protected]
+Description: 	The value of the shunt resistor used to compute power drain on
+                common input voltage pin (RS+). In Ohms.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	[email protected]
+Description: 	The value of the shunt resistor used to compute current flowing
+                between RS+ and RS- voltage sense inputs. In Ohms.
+
+These attributes describe a single physical component, exposed as two distinct
+attributes as it is used to calculate two different values: power load and
+current flowing between RS+ and RS- inputs.

Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8

@@ -1,24 +1,16 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Discrete set of available values for the respective counter
 		configuration are listed in this file.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
-KernelVersion:	4.9
-Contact:	[email protected]
-Description:
-		Read-only attribute that indicates whether the counter for
-		channel Y is counting up or down.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Count mode for channel Y. Four count modes are available:
@@ -52,22 +44,22 @@ Description:
 			continuously throughout.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Read-only attribute that indicates whether excessive noise is
 		present at the channel Y count inputs in quadrature clock mode;
 		irrelevant in non-quadrature clock mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		If the counter device supports preset registers, the preset
 		count for channel Y is provided by this attribute.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Configure channel Y counter for non-quadrature or quadrature
@@ -88,22 +80,22 @@ Description:
 			decoded for UP/DN clock.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Whether to set channel Y counter with channel Y preset value
 		when channel Y index input is active, or continuously count.
 		Valid attribute values are boolean.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Active level of channel Y index input; irrelevant in
 		non-synchronous load mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	[email protected]
 Description:
 		Configure channel Y counter for non-synchronous or synchronous

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -3,11 +3,15 @@ KernelVersion:	4.11
 Contact:	[email protected]
 Description:
 		Reading returns the list possible master modes which are:
-		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
-		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "reset"     :	The UG bit from the TIMx_EGR register is
+				used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used
+				as trigger output.
 		- "update"    : The update event is selected as trigger output.
-				For instance a master timer can then be used as a prescaler for a slave timer.
-		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+				For instance a master timer can then be used
+				as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse
+				    when the CC1IF flag is to be set.
 		- "OC1REF"    : OC1REF signal is used as trigger output.
 		- "OC2REF"    : OC2REF signal is used as trigger output.
 		- "OC3REF"    : OC3REF signal is used as trigger output.
@@ -27,3 +31,62 @@ Description:
 		Reading returns the current sampling frequency.
 		Writing an value different of 0 set and start sampling.
 		Writing 0 stop sampling.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Reading returns the current preset value.
+		Writing sets the preset value.
+		When counting up the counter starts from 0 and fires an
+		event when reach preset value.
+		When counting down the counter start from preset value
+		and fire event when reach 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Configure the device counter quadrature modes:
+		channel_A:
+			Encoder A input servers as the count input and B as
+			the UP/DOWN direction control input.
+
+		channel_B:
+			Encoder B input serves as the count input and A as
+			the UP/DOWN direction control input.
+
+		quadrature:
+			Encoder A and B inputs are mixed to get direction
+			and count with a scale of 0.25.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Reading returns the list possible enable modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode
+KernelVersion:	4.12
+Contact:	[email protected]
+Description:
+		Configure the device counter enable modes, in all case
+		counting direction is set by in_count0_count_direction
+		attribute and the counter is clocked by the internal clock.
+		always:
+			Counter is always ON.
+
+		gated:
+			Counting is enabled when connected trigger signal
+			level is high else counting is disabled.
+
+		triggered:
+			Counting is enabled on rising edge of the connected
+			trigger, and remains enabled for the duration of this
+			selected mode.

Documentation/devicetree/bindings/iio/accel/adxl345.txt

@@ -0,0 +1,38 @@
+Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer
+
+http://www.analog.com/en/products/mems/accelerometers/adxl345.html
+
+Required properties:
+ - compatible : should be "adi,adxl345"
+ - reg : the I2C address or SPI chip select number of the sensor
+
+Required properties for SPI bus usage:
+ - spi-max-frequency : set maximum clock frequency, must be 5000000
+ - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
+
+Optional properties:
+ - interrupt-parent : phandle to the parent interrupt controller as documented
+   in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+ - interrupts: interrupt mapping for IRQ as documented in
+   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example for a I2C device node:
+
+	accelerometer@2a {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+Example for a SPI device node:
+
+	accelerometer@0 {
+		compatible = "adi,adxl345";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpol;
+		spi-cpha;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+	};

Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt

@@ -7,6 +7,7 @@ Required properties:
 			- "amlogic,meson-gxm-saradc" for GXM
 		along with the generic "amlogic,meson-saradc"
 - reg:		the physical base address and length of the registers
+- interrupts:	the interrupt indicating end of sampling
 - clocks:	phandle and clock identifier (see clock-names)
 - clock-names:	mandatory clocks:
 			- "clkin" for the reference clock (typically XTAL)
@@ -23,6 +24,7 @@ Example:
 		compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
 		#io-channel-cells = <1>;
 		reg = <0x0 0x8680 0x0 0x34>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 		clocks = <&xtal>,
 			 <&clkc CLKID_SAR_ADC>,
 			 <&clkc CLKID_SANA>,

Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt

@@ -0,0 +1,20 @@
+Aspeed ADC
+
+This device is a 10-bit converter for 16 voltage channels.  All inputs are
+single ended.
+
+Required properties:
+- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
+- reg: memory window mapping address and length
+- clocks: Input clock used to derive the sample clock. Expected to be the
+          SoC's APB clock.
+- #io-channel-cells: Must be set to <1> to indicate channels are selected
+                     by index.
+
+Example:
+	adc@1e6e9000 {
+		compatible = "aspeed,ast2400-adc";
+		reg = <0x1e6e9000 0xb0>;
+		clocks = <&clk_apb>;
+		#io-channel-cells = <1>;
+	};

Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt

@@ -0,0 +1,18 @@
+Motorola CPCAP PMIC ADC binding
+
+Required properties:
+- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
+- interrupt-parent: The interrupt controller
+- interrupts: The interrupt number for the ADC device
+- interrupt-names: Should be "adcdone"
+- #io-channel-cells: Number of cells in an IIO specifier
+
+Example:
+
+cpcap_adc: adc {
+	compatible = "motorola,mapphone-cpcap-adc";
+	interrupt-parent = <&cpcap>;
+	interrupts = <8 IRQ_TYPE_NONE>;
+	interrupt-names = "adcdone";
+	#io-channel-cells = <1>;
+};

Documentation/devicetree/bindings/iio/adc/ltc2497.txt

@@ -0,0 +1,13 @@
+* Linear Technology / Analog Devices LTC2497 ADC
+
+Required properties:
+ - compatible: Must be "lltc,ltc2497"
+ - reg: Must contain the ADC I2C address
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+	ltc2497: adc@76 {
+		compatible = "lltc,ltc2497";
+		reg = <0x76>;
+		vref-supply = <&ltc2497_reg>;
+	};

Documentation/devicetree/bindings/iio/adc/max1118.txt

@@ -0,0 +1,21 @@
+* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs
+
+Required properties:
+ - compatible: Should be one of
+	* "maxim,max1117"
+	* "maxim,max1118"
+	* "maxim,max1119"
+ - reg: spi chip select number for the device
+ - (max1118 only) vref-supply: The regulator supply for ADC reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "maxim,max1118";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <1000000>;
+};

Documentation/devicetree/bindings/iio/adc/max9611.txt

@@ -0,0 +1,27 @@
+* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
+
+Maxim max9611/max9612 is an high-side current sense amplifier with integrated
+12-bits ADC communicating over I2c bus.
+The device node for this driver shall be a child of a I2c controller.
+
+Required properties
+  - compatible: Should be "maxim,max9611" or "maxim,max9612"
+  - reg: The 7-bits long I2c address of the device
+  - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
+			        resistor
+
+Example:
+
+&i2c4 {
+	csa: adc@7c {
+		compatible = "maxim,max9611";
+		reg = <0x7c>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};
+
+This device node describes a current sense amplifier sitting on I2c4 bus
+with address 0x7c (read address is 0xf9, write address is 0xf8).
+A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
+inputs.