cpufreq: powernv: Register for OCC related opal_message notification

OCC is an On-Chip-Controller which takes care of power and thermal
safety of the chip. During runtime due to power failure or
overtemperature the OCC may throttle the frequencies of the CPUs to
remain within the power budget.

We want the cpufreq driver to be aware of such situations to be able
to report the reason to the user. We register to opal_message_notifier
to receive OCC messages from opal.

powernv_cpufreq_throttle_check() reports any frequency throttling and
this patch will report the reason or event that caused throttling. We
can be throttled if OCC is reset or OCC limits Pmax due to power or
thermal reasons. We are also notified of unthrottling after an OCC
reset or if OCC restores Pmax on the chip.

Signed-off-by: Shilpasri G Bhat <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

drivers/cpufreq/powernv-cpufreq.c

@@ -33,6 +33,7 @@
 #include <asm/firmware.h>
 #include <asm/reg.h>
 #include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
+#include <asm/opal.h>
 
 #define POWERNV_MAX_PSTATES	256
 #define PMSR_PSAFE_ENABLE	(1UL << 30)
@@ -41,7 +42,7 @@
 #define PMSR_LP(x)		((x >> 48) & 0xFF)
 
 static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
-static bool rebooting, throttled;
+static bool rebooting, throttled, occ_reset;
 
 static struct chip {
 	unsigned int id;
@@ -414,6 +415,74 @@ static struct notifier_block powernv_cpufreq_reboot_nb = {
 	.notifier_call = powernv_cpufreq_reboot_notifier,
 };
 
+static char throttle_reason[][30] = {
+					"No throttling",
+					"Power Cap",
+					"Processor Over Temperature",
+					"Power Supply Failure",
+					"Over Current",
+					"OCC Reset"
+				     };
+
+static int powernv_cpufreq_occ_msg(struct notifier_block *nb,
+				   unsigned long msg_type, void *_msg)
+{
+	struct opal_msg *msg = _msg;
+	struct opal_occ_msg omsg;
+
+	if (msg_type != OPAL_MSG_OCC)
+		return 0;
+
+	omsg.type = be64_to_cpu(msg->params[0]);
+
+	switch (omsg.type) {
+	case OCC_RESET:
+		occ_reset = true;
+		/*
+		 * powernv_cpufreq_throttle_check() is called in
+		 * target() callback which can detect the throttle state
+		 * for governors like ondemand.
+		 * But static governors will not call target() often thus
+		 * report throttling here.
+		 */
+		if (!throttled) {
+			throttled = true;
+			pr_crit("CPU Frequency is throttled\n");
+		}
+		pr_info("OCC: Reset\n");
+		break;
+	case OCC_LOAD:
+		pr_info("OCC: Loaded\n");
+		break;
+	case OCC_THROTTLE:
+		omsg.chip = be64_to_cpu(msg->params[1]);
+		omsg.throttle_status = be64_to_cpu(msg->params[2]);
+
+		if (occ_reset) {
+			occ_reset = false;
+			throttled = false;
+			pr_info("OCC: Active\n");
+			return 0;
+		}
+
+		if (omsg.throttle_status &&
+		    omsg.throttle_status <= OCC_MAX_THROTTLE_STATUS)
+			pr_info("OCC: Chip %u Pmax reduced due to %s\n",
+				(unsigned int)omsg.chip,
+				throttle_reason[omsg.throttle_status]);
+		else if (!omsg.throttle_status)
+			pr_info("OCC: Chip %u %s\n", (unsigned int)omsg.chip,
+				throttle_reason[omsg.throttle_status]);
+	}
+	return 0;
+}
+
+static struct notifier_block powernv_cpufreq_opal_nb = {
+	.notifier_call	= powernv_cpufreq_occ_msg,
+	.next		= NULL,
+	.priority	= 0,
+};
+
 static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
 {
 	struct powernv_smp_call_data freq_data;
@@ -481,13 +550,16 @@ static int __init powernv_cpufreq_init(void)
 		return rc;
 
 	register_reboot_notifier(&powernv_cpufreq_reboot_nb);
+	opal_message_notifier_register(OPAL_MSG_OCC, &powernv_cpufreq_opal_nb);
 	return cpufreq_register_driver(&powernv_cpufreq_driver);
 }
 module_init(powernv_cpufreq_init);
 
 static void __exit powernv_cpufreq_exit(void)
 {
 	unregister_reboot_notifier(&powernv_cpufreq_reboot_nb);
+	opal_message_notifier_unregister(OPAL_MSG_OCC,
+					 &powernv_cpufreq_opal_nb);
 	cpufreq_unregister_driver(&powernv_cpufreq_driver);
 }
 module_exit(powernv_cpufreq_exit);