Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"

Adding the #address-cells/#size-cells properties without also adding the other required properties for PCI nodes causes new build warnings from dtc that now show up everywhere, rather than just while verifying the yaml bindings: arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Revert it for now. Fixes: 61dc1e3 ("ARM: dts: BCM5301X: Add basic PCI controller properties") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
wafgo · Oct 5, 2022 · 114b9da · 114b9da
1 parent 40a5af1
commit 114b9da
Showing 1 changed file with 0 additions and 12 deletions.
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -239,26 +239,14 @@
 
 		pcie0: pcie@12000 {
 			reg = <0x00012000 0x1000>;
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
 		};
 
 		pcie1: pcie@13000 {
 			reg = <0x00013000 0x1000>;
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
 		};
 
 		pcie2: pcie@14000 {
 			reg = <0x00014000 0x1000>;
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
 		};
 
 		usb2: usb2@21000 {