Merge tag 'docs-6.9' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A moderatly busy cycle for development this time around.

   - Some cleanup of the main index page for easier navigation

   - Rework some of the other top-level pages for better readability
     and, with luck, fewer merge conflicts in the future.

   - Submit-checklist improvements, hopefully the first of many.

   - New Italian translations

   - A fair number of kernel-doc fixes and improvements. We have also
     dropped the recommendation to use an old version of Sphinx.

   - A new document from Thorsten on bisection

  ... and lots of fixes and updates"

* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
  docs: verify/bisect: fixes, finetuning, and support for Arch
  docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
  docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
  docs: submit-checklist: use subheadings
  docs: submit-checklist: structure by category
  docs: new text on bisecting which also covers bug validation
  docs: drop the version constraints for sphinx and dependencies
  docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
  docs: Restore "smart quotes" for quotes
  docs/zh_CN: accurate translation of "function"
  docs: Include simplified link titles in main index
  docs: Correct formatting of title in admin-guide/index.rst
  docs: kernel_feat.py: fix build error for missing files
  MAINTAINERS: Set the field name for subsystem profile section
  kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
  Fixed case issue with 'fault-injection' in documentation
  kernel-doc: handle #if in enums as well
  Documentation: update mailing list addresses
  doc: kerneldoc.py: fix indentation
  scripts/kernel-doc: simplify signature printing
  ...

Documentation/ABI/testing/sysfs-bus-vdpa

@@ -1,6 +1,6 @@
 What:		/sys/bus/vdpa/drivers_autoprobe
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		This file determines whether new devices are immediately bound
 		to a driver after the creation. It initially contains 1, which
@@ -12,7 +12,7 @@ Description:
 
 What:		/sys/bus/vdpa/driver_probe
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		Writing a device name to this file will cause the kernel binds
 		devices to a compatible driver.
@@ -22,23 +22,23 @@ Description:
 
 What:		/sys/bus/vdpa/drivers/.../bind
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		Writing a device name to this file will cause the driver to
 		attempt to bind to the device. This is useful for overriding
 		default bindings.
 
 What:		/sys/bus/vdpa/drivers/.../unbind
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		Writing a device name to this file will cause the driver to
 		attempt to unbind from the device. This may be useful when
 		overriding default bindings.
 
 What:		/sys/bus/vdpa/devices/.../driver_override
 Date:		November 2021
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		This file allows the driver for a device to be specified.
 		When specified, only a driver with a name matching the value

Documentation/Makefile

@@ -111,7 +111,9 @@ $(YNL_INDEX): $(YNL_RST_FILES)
 $(YNL_RST_DIR)/%.rst: $(YNL_YAML_DIR)/%.yaml $(YNL_TOOL)
 	$(Q)$(YNL_TOOL) -i $< -o $@
 
-htmldocs: $(YNL_INDEX)
+htmldocs texinfodocs latexdocs epubdocs xmldocs: $(YNL_INDEX)
+
+htmldocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
@@ -176,6 +178,7 @@ refcheckdocs:
 	$(Q)cd $(srctree);scripts/documentation-file-ref-check
 
 cleandocs:
+	$(Q)rm -f $(YNL_INDEX) $(YNL_RST_FILES)
 	$(Q)rm -rf $(BUILDDIR)
 	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media clean
 

Documentation/RCU/torture.rst

@@ -318,7 +318,7 @@ Suppose that a previous kvm.sh run left its output in this directory::
 
 	tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
 
-Then this run can be re-run without rebuilding as follow:
+Then this run can be re-run without rebuilding as follow::
 
 	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
 

Documentation/admin-guide/README.rst

@@ -262,9 +262,11 @@ Compiling the kernel
  - Make sure you have at least gcc 5.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
- - Do a ``make`` to create a compressed kernel image. It is also
-   possible to do ``make install`` if you have lilo installed to suit the
-   kernel makefiles, but you may want to check your particular lilo setup first.
+ - Do a ``make`` to create a compressed kernel image. It is also possible to do
+   ``make install`` if you have lilo installed or if your distribution has an
+   install script recognised by the kernel's installer. Most popular
+   distributions will have a recognized install script. You may want to
+   check your distribution's setup first.
 
    To do the actual install, you have to be root, but none of the normal
    build should require that. Don't take the name of root in vain.
@@ -301,32 +303,51 @@ Compiling the kernel
    image (e.g. .../linux/arch/x86/boot/bzImage after compilation)
    to the place where your regular bootable kernel is found.
 
- - Booting a kernel directly from a floppy without the assistance of a
-   bootloader such as LILO, is no longer supported.
-
-   If you boot Linux from the hard drive, chances are you use LILO, which
-   uses the kernel image as specified in the file /etc/lilo.conf.  The
-   kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
-   /boot/bzImage.  To use the new kernel, save a copy of the old image
-   and copy the new image over the old one.  Then, you MUST RERUN LILO
-   to update the loading map! If you don't, you won't be able to boot
-   the new kernel image.
-
-   Reinstalling LILO is usually a matter of running /sbin/lilo.
-   You may wish to edit /etc/lilo.conf to specify an entry for your
-   old kernel image (say, /vmlinux.old) in case the new one does not
-   work.  See the LILO docs for more information.
-
-   After reinstalling LILO, you should be all set.  Shutdown the system,
+ - Booting a kernel directly from a storage device without the assistance
+   of a bootloader such as LILO or GRUB, is no longer supported in BIOS
+   (non-EFI systems). On UEFI/EFI systems, however, you can use EFISTUB
+   which allows the motherboard to boot directly to the kernel.
+   On modern workstations and desktops, it's generally recommended to use a
+   bootloader as difficulties can arise with multiple kernels and secure boot.
+   For more details on EFISTUB,
+   see "Documentation/admin-guide/efi-stub.rst".
+
+ - It's important to note that as of 2016 LILO (LInux LOader) is no longer in
+   active development, though as it was extremely popular, it often comes up
+   in documentation. Popular alternatives include GRUB2, rEFInd, Syslinux,
+   systemd-boot, or EFISTUB. For various reasons, it's not recommended to use
+   software that's no longer in active development.
+
+ - Chances are your distribution includes an install script and running
+   ``make install`` will be all that's needed. Should that not be the case
+   you'll have to identify your bootloader and reference its documentation or
+   configure your EFI.
+
+Legacy LILO Instructions
+------------------------
+
+
+ - If you use LILO the kernel images are specified in the file /etc/lilo.conf.
+   The kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
+   /boot/bzImage. To use the new kernel, save a copy of the old image and copy
+   the new image over the old one. Then, you MUST RERUN LILO to update the
+   loading map! If you don't, you won't be able to boot the new kernel image.
+
+ - Reinstalling LILO is usually a matter of running /sbin/lilo. You may wish
+   to edit /etc/lilo.conf to specify an entry for your old kernel image
+   (say, /vmlinux.old) in case the new one does not work. See the LILO docs
+   for more information.
+
+ - After reinstalling LILO, you should be all set. Shutdown the system,
    reboot, and enjoy!
 
-   If you ever need to change the default root device, video mode,
-   etc. in the kernel image, use your bootloader's boot options
-   where appropriate.  No need to recompile the kernel to change
-   these parameters.
+ - If you ever need to change the default root device, video mode, etc. in the
+   kernel image, use your bootloader's boot options where appropriate. No need
+   to recompile the kernel to change these parameters.
 
  - Reboot with the new kernel and enjoy.
 
+
 If something goes wrong
 -----------------------
 

Documentation/admin-guide/index.rst

@@ -1,3 +1,4 @@
+=================================================
 The Linux kernel user's and administrator's guide
 =================================================
 
@@ -37,6 +38,7 @@ problems and bugs in particular.
    reporting-issues
    reporting-regressions
    quickly-build-trimmed-linux
+   verify-bugs-and-bisect-regressions
    bug-hunting
    bug-bisect
    tainted-kernels

Documentation/admin-guide/kernel-parameters.txt

@@ -4668,6 +4668,11 @@
 			may be specified.
 			Format: <port>,<port>....
 
+	possible_cpus=  [SMP,S390,X86]
+			Format: <unsigned int>
+			Set the number of possible CPUs, overriding the
+			regular discovery mechanisms (such as ACPI/FW, etc).
+
 	powersave=off	[PPC] This option disables power saving features.
 			It specifically disables cpuidle and sets the
 			platform machine description specific power_save

Documentation/admin-guide/tainted-kernels.rst

@@ -34,7 +34,7 @@ name of the command ('Comm:') that triggered the event::
 
 You'll find a 'Not tainted: ' there if the kernel was not tainted at the
 time of the event; if it was, then it will print 'Tainted: ' and characters
-either letters or blanks. In above example it looks like this::
+either letters or blanks. In the example above it looks like this::
 
 	Tainted: P        W  O
 
@@ -52,7 +52,7 @@ At runtime, you can query the tainted state by reading
 tainted; any other number indicates the reasons why it is. The easiest way to
 decode that number is the script ``tools/debugging/kernel-chktaint``, which your
 distribution might ship as part of a package called ``linux-tools`` or
-``kernel-tools``; if it doesn't you can download the script from
+``kernel-tools``; if it doesn't, you can download the script from
 `git.kernel.org <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/tools/debugging/kernel-chktaint>`_
 and execute it with ``sh kernel-chktaint``, which would print something like
 this on the machine that had the statements in the logs that were quoted earlier::