Merge tag 'regulator-v3.11-2' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Fixes for the merge window

  A set of small fixes for issues noticed during the merge window, all
  very much non-invasive"

* tag 'regulator-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  MAINTAINERS: Update git repository
  regulator: max8997: Fix a trivial typo in documentation
  regulator: s5m8767: Fix a trivial typo in documentation
  regulator: s2mps11: Convert ramp rate to uV/us and set default ramp rate
  regulator: s5m8767: Update s5m8767-regulator bindings document

Documentation/devicetree/bindings/regulator/max8997-regulator.txt

@@ -1,6 +1,6 @@
 * Maxim MAX8997 Voltage and Current Regulator
 
-The Maxim MAX8997 is a multi-function device which includes volatage and
+The Maxim MAX8997 is a multi-function device which includes voltage and
 current regulators, rtc, charger controller and other sub-blocks. It is
 interfaced to the host controller using a i2c interface. Each sub-block is
 addressed by the host system using different i2c slave address. This document

Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt

@@ -1,6 +1,6 @@
 * Samsung S5M8767 Voltage and Current Regulator
 
-The Samsung S5M8767 is a multi-function device which includes volatage and
+The Samsung S5M8767 is a multi-function device which includes voltage and
 current regulators, rtc, charger controller and other sub-blocks. It is
 interfaced to the host controller using a i2c interface. Each sub-block is
 addressed by the host system using different i2c slave address. This document
@@ -103,13 +103,13 @@ Example:
 
 		s5m8767,pmic-buck-default-dvs-idx = <0>;
 
-		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */
-						 <&gpx0 1 1 0 0>, /* DVS2 */
-						 <&gpx0 2 1 0 0>; /* DVS3 */
+		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
+						 <&gpx0 1 0>, /* DVS2 */
+						 <&gpx0 2 0>; /* DVS3 */
 
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */
-						<&gpx2 4 1 0 0>, /* SET2 */
-						<&gpx2 5 1 0 0>; /* SET3 */
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
+						<&gpx2 4 0>, /* SET2 */
+						<&gpx2 5 0>; /* SET3 */
 
 		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
 						 <1250000>, <1200000>,

MAINTAINERS

@@ -8976,7 +8976,7 @@ M:	Liam Girdwood <[email protected]>
 M:	Mark Brown <[email protected]>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/regulator.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
 S:	Supported
 F:	drivers/regulator/
 F:	include/linux/regulator/

drivers/regulator/s2mps11.c

@@ -42,7 +42,7 @@ static int get_ramp_delay(int ramp_delay)
 {
 	unsigned char cnt = 0;
 
-	ramp_delay /= 6;
+	ramp_delay /= 6250;
 
 	while (true) {
 		ramp_delay = ramp_delay >> 1;
@@ -113,6 +113,7 @@ static struct regulator_ops s2mps11_buck_ops = {
 	.min_uV		= S2MPS11_BUCK_MIN1,			\
 	.uV_step	= S2MPS11_BUCK_STEP1,			\
 	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B1CTRL2 + (num - 1) * 2,	\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
 	.enable_reg	= S2MPS11_REG_B1CTRL1 + (num - 1) * 2,	\
@@ -128,6 +129,7 @@ static struct regulator_ops s2mps11_buck_ops = {
 	.min_uV		= S2MPS11_BUCK_MIN1,			\
 	.uV_step	= S2MPS11_BUCK_STEP1,			\
 	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B5CTRL2,			\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
 	.enable_reg	= S2MPS11_REG_B5CTRL1,			\
@@ -143,6 +145,7 @@ static struct regulator_ops s2mps11_buck_ops = {
 	.min_uV		= S2MPS11_BUCK_MIN1,			\
 	.uV_step	= S2MPS11_BUCK_STEP1,			\
 	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B6CTRL2 + (num - 6) * 2,	\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
 	.enable_reg	= S2MPS11_REG_B6CTRL1 + (num - 6) * 2,	\
@@ -158,6 +161,7 @@ static struct regulator_ops s2mps11_buck_ops = {
 	.min_uV		= S2MPS11_BUCK_MIN3,			\
 	.uV_step	= S2MPS11_BUCK_STEP3,			\
 	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B9CTRL2,			\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
 	.enable_reg	= S2MPS11_REG_B9CTRL1,			\
@@ -173,6 +177,7 @@ static struct regulator_ops s2mps11_buck_ops = {
 	.min_uV		= S2MPS11_BUCK_MIN2,			\
 	.uV_step	= S2MPS11_BUCK_STEP2,			\
 	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS11_RAMP_DELAY,			\
 	.vsel_reg	= S2MPS11_REG_B10CTRL2,			\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
 	.enable_reg	= S2MPS11_REG_B10CTRL1,			\

include/linux/mfd/samsung/s2mps11.h

@@ -189,6 +189,7 @@ enum s2mps11_regulators {
 #define S2MPS11_ENABLE_SHIFT	0x06
 #define S2MPS11_LDO_N_VOLTAGES	(S2MPS11_LDO_VSEL_MASK + 1)
 #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
+#define S2MPS11_RAMP_DELAY	25000		/* uV/us */
 
 #define S2MPS11_PMIC_EN_SHIFT	6
 #define S2MPS11_REGULATOR_MAX (S2MPS11_REG_MAX - 3)