Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of Thunderbolt and USB changes for 6.0-rc1.

  Lots of little things here, nothing major, just constant development
  on some new hardware support and cleanups of older drivers. Highlights
  are:

   - lots of typec changes and improvements for new hardware

   - new gadget controller driver

   - thunderbolt support for new hardware

   - the normal set of new usb-serial device ids and cleanups

   - loads of dwc3 controller fixes and improvements

   - mtu3 driver updates

   - testusb fixes for longtime issues (not many people use this tool it
     seems.)

   - minor driver fixes and improvements over the USB tree

   - chromeos platform driver changes were added and then reverted as
     they depened on some typec changes, but the cross-tree merges
     caused problems so they will come back later through the platform
     tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
  usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  usb: misc: onboard_usb_hub: Add reset-gpio support
  USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  dt-bindings: usb: Add binding for TI USB8041 hub controller
  ARM: multi_v7_defconfig: enable USB onboard HUB driver
  ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for stm32g0 controller
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  usb/chipidea: fix repeated words in comments
  usb: renesas-xhci: Do not print any log while fw verif success
  usb: typec: retimer: Add missing id check in match callback
  USB: xhci: Fix comment typo
  usb/typec/tcpm: fix repeated words in comments
  usb/musb: fix repeated words in comments
  ...

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

@@ -19,7 +19,7 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		===========	==============================================
+		============	==============================================
 		file		The path to the backing file for the LUN.
 				Required if LUN is not marked as removable.
 		ro		Flag specifying access to the LUN shall be
@@ -32,4 +32,10 @@ Description:
 				being a CD-ROM.
 		nofua		Flag specifying that FUA flag
 				in SCSI WRITE(10,12)
-		===========	==============================================
+		forced_eject	This write-only file is useful only when
+				the function is active. It causes the backing
+				file to be forcibly detached from the LUN,
+				regardless of whether the host has allowed it.
+				Any non-zero number of bytes written will
+				result in ejection.
+		============	==============================================

Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub

@@ -0,0 +1,8 @@
+What:		/sys/bus/platform/devices/<dev>/always_powered_in_suspend
+Date:		June 2022
+KernelVersion:	5.20
+Contact:	Matthias Kaehlcke <[email protected]>
+		[email protected]
+Description:
+		(RW) Controls whether the USB hub remains always powered
+		during system suspend or not.

Documentation/ABI/testing/sysfs-bus-usb

@@ -253,6 +253,17 @@ Description:
 		only if the system firmware is capable of describing the
 		connection between a port and its connector.
 
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/disable
+Date:		June 2022
+Contact:	Michael Grzeschik <[email protected]>
+Description:
+		This file controls the state of a USB port, including
+		Vbus power output (but only on hubs that support
+		power switching -- most hubs don't support it). If
+		a port is disabled, the port is unusable: Devices
+		attached to the port will not be detected, initialized,
+		or enumerated.
+
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <[email protected]>

Documentation/ABI/testing/sysfs-class-typec

@@ -141,6 +141,14 @@ Description:
 		- "reverse": CC2 orientation
 		- "unknown": Orientation cannot be determined.
 
+What:		/sys/class/typec/<port>/select_usb_power_delivery
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Lists the USB Power Delivery Capabilities that the port can
+		advertise to the partner. The currently used capabilities are in
+		brackets. Selection happens by writing to the file.
+
 USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
 
 What:		/sys/class/typec/<port>-partner/accessory_mode

Documentation/ABI/testing/sysfs-class-usb_power_delivery

@@ -0,0 +1,240 @@
+What:		/sys/class/usb_power_delivery
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Directory for USB Power Delivery devices.
+
+What:		/sys/class/usb_power_delivery/.../revision
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		File showing the USB Power Delivery Specification Revision used
+		in communication.
+
+What:		/sys/class/usb_power_delivery/.../version
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This is an optional attribute file showing the version of the
+		specific revision of the USB Power Delivery Specification. In
+		most cases the specification version is not known and the file
+		is not available.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The source capabilities message "Source_Capabilities" contains a
+		set of Power Data Objects (PDO), each representing a type of
+		power supply. The order of the PDO objects is defined in the USB
+		Power Delivery Specification. Each PDO - power supply - will
+		have its own device, and the PDO device name will start with the
+		object position number as the first character followed by the
+		power supply type name (":" as delimiter).
+
+			/sys/class/usb_power_delivery/.../source_capabilities/<position>:<type>
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The sink capability message "Sink_Capabilities" contains a set
+		of Power Data Objects (PDO) just like with source capabilities,
+		but instead of describing the power capabilities, these objects
+		describe the power requirements.
+
+		The order of the objects in the sink capability message is the
+		same as with the source capabilities message.
+
+Fixed Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Devices containing the attributes (the bit fields) defined for
+		Fixed Supplies.
+
+		The device "1:fixed_supply" is special. USB Power Delivery
+		Specification dictates that the first PDO (at object position
+		1), and the only mandatory PDO, is always the vSafe5V Fixed
+		Supply Object. vSafe5V Object has additional fields defined for
+		it that the other Fixed Supply Objects do not have and that are
+		related to the USB capabilities rather than power capabilities.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_power
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file contains boolean value that tells does the device
+		support both source and sink power roles.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_suspend_supported
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file shows the value of the USB Suspend Supported bit in
+		vSafe5V Fixed Supply Object. If the bit is set then the device
+		will follow the USB 2.0 and USB 3.2 rules for suspend and
+		resume.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file shows the value of the Unconstrained Power bit in
+		vSafe5V Fixed Supply Object. The bit is set when an external
+		source of power, powerful enough to power the entire system on
+		its own, is available for the device.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_communication_capable
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file shows the value of the USB Communication Capable bit in
+		vSafe5V Fixed Supply Object.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_data
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file shows the value of the Dual-Role Data bit in vSafe5V
+		Fixed Supply Object. Dual role data means ability act as both
+		USB host and USB device.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unchunked_extended_messages_supported
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file shows the value of the Unchunked Extended Messages
+		Supported bit in vSafe5V Fixed Supply Object.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply/voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The voltage the supply supports in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Maximum current of the fixed source supply in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/operational_current
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Operational current of the sink in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/fast_role_swap_current
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		This file contains the value of the "Fast Role Swap USB Type-C
+		Current" field that tells the current level the sink requires
+		after a Fast Role Swap.
+		0 - Fast Swap not supported"
+		1 - Default USB Power"
+		2 - 1.5A@5V"
+		3 - 3.0A@5V"
+
+Variable Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Variable Power Supply PDO.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:variable_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The maximum current in milliamperes that the source can supply
+		at the given Voltage range.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:variable_supply/operational_current
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The operational current in milliamperes that the sink requires
+		at the given Voltage range.
+
+Battery Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Battery PDO.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:battery/maximum_power
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Maximum allowable Power in milliwatts.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:battery/operational_power
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The operational power that the sink requires at the given
+		voltage range.
+
+Standard Power Range (SPR) Programmable Power Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Programmable Power Supply (PPS) Augmented PDO (APDO).
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		Maximum Current in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:programmable_supply/pps_power_limited
+Date:		May 2022
+Contact:	Heikki Krogerus <[email protected]>
+Description:
+		The PPS Power Limited bit indicates whether or not the source
+		supply will exceed the rated output power if requested.

Documentation/devicetree/bindings/usb/analogix,anx7411.yaml

@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7411 Type-C controller bindings
+
+maintainers:
+  - Xin Ji <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7411
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml
+    description:
+      Properties for usb c connector.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      data-role: true
+
+      try-power-role: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec@2c {
+            compatible = "analogix,anx7411";
+            reg = <0x2c>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                try-power-role = "source";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...