Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/…

…pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "Quite a lot of kexec work this time around. Many singleton patches in
  many places. The notable patch series are:

   - nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
     conversions for file paths'.

   - Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
     Folio conversions for directory paths'.

   - IA64 remnant removal in Heiko Carstens's 'Remove unused code after
     IA-64 removal'.

   - Arnd Bergmann has enabled the -Wmissing-prototypes warning
     everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
     some followup fixes:

      - Nathan Chancellor has cleaned up the hexagon build in the series
        'hexagon: Fix up instances of -Wmissing-prototypes'.

      - Nathan also addressed some s390 warnings in 's390: A couple of
        fixes for -Wmissing-prototypes'.

      - Arnd Bergmann addresses the same warnings for MIPS in his series
        'mips: address -Wmissing-prototypes warnings'.

   - Baoquan He has made kexec_file operate in a top-down-fitting manner
     similar to kexec_load in the series 'kexec_file: Load kernel at top
     of system RAM if required'

   - Baoquan He has also added the self-explanatory 'kexec_file: print
     out debugging message if required'.

   - Some checkstack maintenance work from Tiezhu Yang in the series
     'Modify some code about checkstack'.

   - Douglas Anderson has disentangled the watchdog code's logging when
     multiple reports are occurring simultaneously. The series is
     'watchdog: Better handling of concurrent lockups'.

   - Yuntao Wang has contributed some maintenance work on the crash code
     in 'crash: Some cleanups and fixes'"

* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
  crash_core: fix and simplify the logic of crash_exclude_mem_range()
  x86/crash: use SZ_1M macro instead of hardcoded value
  x86/crash: remove the unused image parameter from prepare_elf_headers()
  kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
  scripts/decode_stacktrace.sh: strip unexpected CR from lines
  watchdog: if panicking and we dumped everything, don't re-enable dumping
  watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
  watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
  watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
  kexec_core: fix the assignment to kimage->control_page
  x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
  lib/trace_readwrite.c:: replace asm-generic/io with linux/io
  nilfs2: cpfile: fix some kernel-doc warnings
  stacktrace: fix kernel-doc typo
  scripts/checkstack.pl: fix no space expression between sp and offset
  x86/kexec: fix incorrect argument passed to kexec_dprintk()
  x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
  nilfs2: add missing set_freezable() for freezable kthread
  kernel: relay: remove relay_file_splice_read dead code, doesn't work
  docs: submit-checklist: remove all of "make namespacecheck"
  ...

CREDITS

@@ -319,6 +319,9 @@ N: Ohad Ben Cohen
 E: [email protected]
 D: Remote Processor (remoteproc) subsystem
 D: Remote Processor Messaging (rpmsg) subsystem
+D: Hardware spinlock (hwspinlock) subsystem
+D: OMAP hwspinlock driver
+D: OMAP remoteproc driver
 
 N: Krzysztof Benedyczak
 E: [email protected]

Documentation/driver-api/surface_aggregator/ssh.rst

@@ -39,7 +39,7 @@ Note that the standard disclaimer for this subsystem also applies to this
 document: All of this has been reverse-engineered and may thus be erroneous
 and/or incomplete.
 
-All CRCs used in the following are two-byte ``crc_ccitt_false(0xffff, ...)``.
+All CRCs used in the following are two-byte ``crc_itu_t(0xffff, ...)``.
 All multi-byte values are little-endian, there is no implicit padding between
 values.
 

Documentation/filesystems/squashfs.rst

@@ -64,6 +64,66 @@ obtained from this site also.
 The squashfs-tools development tree is now located on kernel.org
 	git://git.kernel.org/pub/scm/fs/squashfs/squashfs-tools.git
 
+2.1 Mount options
+-----------------
+===================    =========================================================
+errors=%s              Specify whether squashfs errors trigger a kernel panic
+                       or not
+
+		       ==========  =============================================
+                         continue  errors don't trigger a panic (default)
+                            panic  trigger a panic when errors are encountered,
+                                   similar to several other filesystems (e.g.
+                                   btrfs, ext4, f2fs, GFS2, jfs, ntfs, ubifs)
+
+                                   This allows a kernel dump to be saved,
+                                   useful for analyzing and debugging the
+                                   corruption.
+                       ==========  =============================================
+threads=%s             Select the decompression mode or the number of threads
+
+                       If SQUASHFS_CHOICE_DECOMP_BY_MOUNT is set:
+
+		       ==========  =============================================
+                           single  use single-threaded decompression (default)
+
+                                   Only one block (data or metadata) can be
+                                   decompressed at any one time. This limits
+                                   CPU and memory usage to a minimum, but it
+                                   also gives poor performance on parallel I/O
+                                   workloads when using multiple CPU machines
+                                   due to waiting on decompressor availability.
+                            multi  use up to two parallel decompressors per core
+
+                                   If you have a parallel I/O workload and your
+                                   system has enough memory, using this option
+                                   may improve overall I/O performance. It
+                                   dynamically allocates decompressors on a
+                                   demand basis.
+                           percpu  use a maximum of one decompressor per core
+
+                                   It uses percpu variables to ensure
+                                   decompression is load-balanced across the
+                                   cores.
+                        1|2|3|...  configure the number of threads used for
+                                   decompression
+
+                                   The upper limit is num_online_cpus() * 2.
+                       ==========  =============================================
+
+                       If SQUASHFS_CHOICE_DECOMP_BY_MOUNT is **not** set and
+                       SQUASHFS_DECOMP_MULTI, SQUASHFS_MOUNT_DECOMP_THREADS are
+                       both set:
+
+		       ==========  =============================================
+                          2|3|...  configure the number of threads used for
+                                   decompression
+
+                                   The upper limit is num_online_cpus() * 2.
+                       ==========  =============================================
+
+===================    =========================================================
+
 3. Squashfs Filesystem Design
 -----------------------------
 

Documentation/translations/ja_JP/SubmitChecklist

@@ -56,8 +56,8 @@ Linux カーネルパッチ投稿者向けチェックリスト
 
  9: sparseを利用してちゃんとしたコードチェックをしてください。
 
-10: 'make checkstack' と 'make namespacecheck' を利用し、問題が発見されたら
-    修正してください。'make checkstack' は明示的に問題を示しませんが、どれか
+10: 'make checkstack' を利用し、問題が発見されたら修正してください。
+    'make checkstack' は明示的に問題を示しませんが、どれか
     １つの関数が512バイトより大きいスタックを使っていれば、修正すべき候補と
     なります。
 

Documentation/translations/zh_CN/process/submit-checklist.rst

@@ -53,8 +53,7 @@ Linux内核补丁提交检查单
 9) 通过 sparse 清查。
    （参见 Documentation/translations/zh_CN/dev-tools/sparse.rst ）
 
-10) 使用 ``make checkstack`` 和 ``make namespacecheck`` 并修复他们发现的任何
-    问题。
+10) 使用 ``make checkstack`` 并修复他们发现的任何问题。
 
     .. note::
 

Documentation/translations/zh_TW/process/submit-checklist.rst

@@ -56,8 +56,7 @@ Linux內核補丁提交檢查單
 9) 通過 sparse 清查。
    （參見 Documentation/translations/zh_CN/dev-tools/sparse.rst ）
 
-10) 使用 ``make checkstack`` 和 ``make namespacecheck`` 並修復他們發現的任何
-    問題。
+10) 使用 ``make checkstack`` 並修復他們發現的任何問題。
 
     .. note::
 

MAINTAINERS

@@ -9283,7 +9283,6 @@ F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
 HARDWARE SPINLOCK CORE
-M:	Ohad Ben-Cohen <[email protected]>
 M:	Bjorn Andersson <[email protected]>
 R:	Baolin Wang <[email protected]>
 L:	[email protected]
@@ -15715,9 +15714,8 @@ F:	Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
 F:	drivers/gpio/gpio-omap.c
 
 OMAP HARDWARE SPINLOCK SUPPORT
-M:	Ohad Ben-Cohen <[email protected]>
 L:	[email protected]
-S:	Maintained
+S:	Orphan
 F:	drivers/hwspinlock/omap_hwspinlock.c
 
 OMAP HS MMC SUPPORT

Makefile

@@ -1576,7 +1576,8 @@ help:
 	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
 	 echo  ''
 	@echo  'Static analysers:'
-	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  checkstack      - Generate a list of stack hogs and consider all functions'
+	@echo  '                    with a stack size larger than MINSTACKSIZE (default: 100)'
 	@echo  '  versioncheck    - Sanity check on version.h usage'
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
@@ -2016,9 +2017,10 @@ CHECKSTACK_ARCH := $(SUBARCH)
 else
 CHECKSTACK_ARCH := $(ARCH)
 endif
+MINSTACKSIZE	?= 100
 checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
-	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE)
 
 kernelrelease:
 	@$(filechk_kernel.release)

arch/Kconfig

@@ -301,17 +301,8 @@ config ARCH_HAS_DMA_CLEAR_UNCACHED
 config ARCH_HAS_CPU_FINALIZE_INIT
 	bool
 
-# Select if arch init_task must go in the __init_task_data section
-config ARCH_TASK_STRUCT_ON_STACK
-	bool
-
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
-	bool
-
 config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	bool
-	depends on !ARCH_TASK_STRUCT_ALLOCATOR
 	help
 	  An architecture should select this to provide hardened usercopy
 	  knowledge about what region of the thread_struct should be
@@ -320,10 +311,6 @@ config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	  should be implemented. Without this, the entire thread_struct
 	  field in task_struct will be left whitelisted.
 
-# Select if arch has its private alloc_thread_stack() function
-config ARCH_THREAD_STACK_ALLOCATOR
-	bool
-
 # Select if arch wants to size task_struct dynamically via arch_task_struct_size:
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool

arch/alpha/lib/Makefile

@@ -4,7 +4,6 @@
 #
 
 asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
 
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.

arch/alpha/mm/Makefile

@@ -3,6 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-ccflags-y := -Werror
-
 obj-y	:= init.o fault.o

arch/arm64/kernel/kexec_image.c

@@ -122,9 +122,9 @@ static void *image_load(struct kimage *image,
 	kernel_segment->memsz -= text_offset;
 	image->start = kernel_segment->mem;
 
-	pr_debug("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				kernel_segment->mem, kbuf.bufsz,
-				kernel_segment->memsz);
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz,
+		      kernel_segment->memsz);
 
 	return NULL;
 }

arch/arm64/kernel/machine_kexec.c

@@ -32,26 +32,12 @@
 static void _kexec_image_info(const char *func, int line,
 	const struct kimage *kimage)
 {
-	unsigned long i;
-
-	pr_debug("%s:%d:\n", func, line);
-	pr_debug("  kexec kimage info:\n");
-	pr_debug("    type:        %d\n", kimage->type);
-	pr_debug("    start:       %lx\n", kimage->start);
-	pr_debug("    head:        %lx\n", kimage->head);
-	pr_debug("    nr_segments: %lu\n", kimage->nr_segments);
-	pr_debug("    dtb_mem: %pa\n", &kimage->arch.dtb_mem);
-	pr_debug("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
-	pr_debug("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
-
-	for (i = 0; i < kimage->nr_segments; i++) {
-		pr_debug("      segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
-			i,
-			kimage->segment[i].mem,
-			kimage->segment[i].mem + kimage->segment[i].memsz,
-			kimage->segment[i].memsz,
-			kimage->segment[i].memsz /  PAGE_SIZE);
-	}
+	kexec_dprintk("%s:%d:\n", func, line);
+	kexec_dprintk("  kexec kimage info:\n");
+	kexec_dprintk("    type:        %d\n", kimage->type);
+	kexec_dprintk("    head:        %lx\n", kimage->head);
+	kexec_dprintk("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
+	kexec_dprintk("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
 }
 
 void machine_kexec_cleanup(struct kimage *kimage)

arch/arm64/kernel/machine_kexec_file.c

@@ -127,8 +127,8 @@ int load_other_segments(struct kimage *image,
 		image->elf_load_addr = kbuf.mem;
 		image->elf_headers_sz = headers_sz;
 
-		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load initrd */
@@ -148,8 +148,8 @@ int load_other_segments(struct kimage *image,
 			goto out_err;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				initrd_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      initrd_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load dtb */
@@ -179,8 +179,8 @@ int load_other_segments(struct kimage *image,
 	image->arch.dtb = dtb;
 	image->arch.dtb_mem = kbuf.mem;
 
-	pr_debug("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			kbuf.mem, kbuf.bufsz, kbuf.memsz);
+	kexec_dprintk("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kbuf.mem, kbuf.bufsz, kbuf.memsz);
 
 	return 0;
 

arch/hexagon/include/asm/irq.h

@@ -20,4 +20,7 @@
 
 #include <asm-generic/irq.h>
 
+struct pt_regs;
+void arch_do_IRQ(struct pt_regs *);
+
 #endif

arch/hexagon/kernel/process.c

@@ -5,6 +5,7 @@
  * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/cpu.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task.h>
@@ -152,6 +153,7 @@ unsigned long __get_wchan(struct task_struct *p)
  * Returns 0 if there's no need to re-check for more work.
  */
 
+int do_work_pending(struct pt_regs *regs, u32 thread_info_flags);
 int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 {
 	if (!(thread_info_flags & _TIF_WORK_MASK)) {

arch/hexagon/kernel/reset.c

@@ -3,6 +3,7 @@
  * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/reboot.h>
 #include <linux/smp.h>
 #include <asm/hexagon_vm.h>
 

arch/hexagon/kernel/signal.c

@@ -220,7 +220,7 @@ void do_signal(struct pt_regs *regs)
  * Architecture-specific wrappers for signal-related system calls
  */
 
-asmlinkage int sys_rt_sigreturn(void)
+SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe __user *frame;

arch/hexagon/kernel/smp.c

@@ -79,7 +79,7 @@ void smp_vm_unmask_irq(void *info)
  * Specifically, first arg is irq, second is the irq_desc.
  */
 
-irqreturn_t handle_ipi(int irq, void *desc)
+static irqreturn_t handle_ipi(int irq, void *desc)
 {
 	int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
@@ -124,7 +124,7 @@ void __init smp_prepare_boot_cpu(void)
  * to point to current thread info
  */
 
-void start_secondary(void)
+static void start_secondary(void)
 {
 	unsigned long thread_ptr;
 	unsigned int cpu, irq;

arch/hexagon/kernel/time.c

@@ -17,7 +17,9 @@
 #include <linux/of_irq.h>
 #include <linux/module.h>
 
+#include <asm/delay.h>
 #include <asm/hexagon_vm.h>
+#include <asm/time.h>
 
 #define TIMER_ENABLE		BIT(0)
 
@@ -160,7 +162,7 @@ static irqreturn_t timer_interrupt(int irq, void *devid)
  * This runs just before the delay loop is calibrated, and
  * is used for delay calibration.
  */
-void __init time_init_deferred(void)
+static void __init time_init_deferred(void)
 {
 	struct resource *resource = NULL;
 	struct clock_event_device *ce_dev = &hexagon_clockevent_dev;

arch/hexagon/kernel/traps.c

@@ -281,6 +281,7 @@ static void cache_error(struct pt_regs *regs)
 /*
  * General exception handler
  */
+void do_genex(struct pt_regs *regs);
 void do_genex(struct pt_regs *regs)
 {
 	/*
@@ -331,13 +332,7 @@ void do_genex(struct pt_regs *regs)
 	}
 }
 
-/* Indirect system call dispatch */
-long sys_syscall(void)
-{
-	printk(KERN_ERR "sys_syscall invoked!\n");
-	return -ENOSYS;
-}
-
+void do_trap0(struct pt_regs *regs);
 void do_trap0(struct pt_regs *regs)
 {
 	syscall_fn syscall;
@@ -415,6 +410,7 @@ void do_trap0(struct pt_regs *regs)
 /*
  * Machine check exception handler
  */
+void do_machcheck(struct pt_regs *regs);
 void do_machcheck(struct pt_regs *regs)
 {
 	/* Halt and catch fire */
@@ -425,6 +421,7 @@ void do_machcheck(struct pt_regs *regs)
  * Treat this like the old 0xdb trap.
  */
 
+void do_debug_exception(struct pt_regs *regs);
 void do_debug_exception(struct pt_regs *regs)
 {
 	regs->hvmer.vmest &= ~HVM_VMEST_CAUSE_MSK;