Merge tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers for: - Aquacomputer D5 Next - SB-RMI power module Added chip support to existing drivers: - Support for various Zen2 and Zen3 APUs and for Yellow Carp (SMU v13) added to k10temp driver - Support for Silicom n5010 PAC added to intel-m10-bmc driver - Support for BPD-RS600 added to pmbus/bpa-rs600 driver Other notable changes: - In k10temp, do not display Tdie on Zen CPUs if there is no difference between Tdie and Tctl - Converted adt7470 and dell-smm drivers to use devm_hwmon_device_register_with_info API - Support for temperature/pwm tables added to axi-fan-control driver - Enabled fan control for Dell Precision 7510 in dell-smm driver Various other minor improvements and fixes in several drivers" * tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits) hwmon: add driver for Aquacomputer D5 Next hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API hwmon: (adt7470) Convert to use regmap hwmon: (adt7470) Fix some style issues hwmon: (k10temp) Add support for yellow carp hwmon: (k10temp) Rework the temperature offset calculation hwmon: (k10temp) Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU hwmon: (k10temp) Add additional missing Zen2 and Zen3 APUs hwmon: remove amd_energy driver in Makefile hwmon: (dell-smm) Rework SMM function debugging hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init hwmon: (dell-smm) Mark tables as __initconst hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits hwmon: (axi-fan-control) Support temperature vs pwm points hwmon: (axi-fan-control) Handle irqs in natural order hwmon: (axi-fan-control) Make sure the clock is enabled hwmon: (pmbus/ibm-cffps) Fix write bits for LED control hwmon: (w83781d) Match on device tree compatibles dt-bindings: hwmon: Add bindings for Winbond W83781D ...
wafgo · Aug 31, 2021 · e7c1bbc · e7c1bbc
2 parents 871dda4 + 0e35f63
commit e7c1bbc
Show file tree

Hide file tree

Showing 25 changed files with 2,276 additions and 1,177 deletions.
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amd,sbrmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: >
+  Sideband Remote Management Interface (SB-RMI) compliant
+  AMD SoC power device.
+
+maintainers:
+  - Akshay Gupta <[email protected]>
+
+description: |
+  SB Remote Management Interface (SB-RMI) is an SMBus compatible
+  interface that reports AMD SoC's Power (normalized Power) using,
+  Mailbox Service Request and resembles a typical 8-pin remote power
+  sensor's I2C interface to BMC. The power attributes in hwmon
+  reports power in microwatts.
+
+properties:
+  compatible:
+    enum:
+      - amd,sbrmi
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C bus address of the device as specified in Section SBI SMBus Address
+      of the SoC register reference. The SB-RMI address is normally 78h for
+      socket 0 and 70h for socket 1, but it could vary based on hardware
+      address select pins.
+      \[open source SoC register reference\]
+        https://www.amd.com/en/support/tech-docs?keyword=55898
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sbrmi@3c {
+                compatible = "amd,sbrmi";
+                reg = <0x3c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/winbond,w83781d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Winbond W83781 and compatible hardware monitor IC
+
+maintainers:
+  - Linus Walleij <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - winbond,w83781d
+      - winbond,w83781g
+      - winbond,w83782d
+      - winbond,w83783s
+      - asus,as99127f
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@28 {
+            compatible = "winbond,w83781d";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -0,0 +1,61 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver aquacomputer-d5next
+=================================
+
+Supported devices:
+
+* Aquacomputer D5 Next watercooling pump
+
+Author: Aleksa Savic
+
+Description
+-----------
+
+This driver exposes hardware sensors of the Aquacomputer D5 Next watercooling
+pump, which communicates through a proprietary USB HID protocol.
+
+Available sensors are pump and fan speed, power, voltage and current, as
+well as coolant temperature. Also available through debugfs are the serial
+number, firmware version and power-on count.
+
+Attaching a fan is optional and allows it to be controlled using temperature
+curves directly from the pump. If it's not connected, the fan-related sensors
+will report zeroes.
+
+The pump can be configured either through software or via its physical
+interface. Configuring the pump through this driver is not implemented, as it
+seems to require sending it a complete configuration. That includes addressable
+RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
+better suited for userspace tools.
+
+Usage notes
+-----------
+
+The pump communicates via HID reports. The driver is loaded automatically by
+the kernel and supports hotswapping.
+
+Sysfs entries
+-------------
+
+============ =============================================
+temp1_input  Coolant temperature (in millidegrees Celsius)
+fan1_input   Pump speed (in RPM)
+fan2_input   Fan speed (in RPM)
+power1_input Pump power (in micro Watts)
+power2_input Fan power (in micro Watts)
+in0_input    Pump voltage (in milli Volts)
+in1_input    Fan voltage (in milli Volts)
+in2_input    +5V rail voltage (in milli Volts)
+curr1_input  Pump current (in milli Amperes)
+curr2_input  Fan current (in milli Amperes)
+============ =============================================
+
+Debugfs entries
+---------------
+
+================ ===============================================
+serial_number    Serial number of the pump
+firmware_version Version of installed firmware
+power_cycles     Count of how many times the pump was powered on
+================ ===============================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
@@ -39,6 +39,7 @@ Hardware Monitoring Kernel Drivers
    adt7475
    aht10
    amc6821
+   aquacomputer_d5next
    asb100
    asc7621
    aspeed-pwm-tacho
@@ -160,6 +161,7 @@ Hardware Monitoring Kernel Drivers
    pwm-fan
    q54sj108a2
    raspberrypi-hwmon
+   sbrmi
    sbtsi_temp
    sch5627
    sch5636

diff --git a/Documentation/hwmon/sbrmi.rst b/Documentation/hwmon/sbrmi.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver sbrmi
+===================
+
+Supported hardware:
+
+  * Sideband Remote Management Interface (SB-RMI) compliant AMD SoC
+    device connected to the BMC via the APML.
+
+    Prefix: 'sbrmi'
+
+    Addresses scanned: This driver doesn't support address scanning.
+
+    To instantiate this driver on an AMD CPU with SB-RMI
+    support, the i2c bus number would be the bus connected from the board
+    management controller (BMC) to the CPU.
+    The SMBus address is really 7 bits. Some vendors and the SMBus
+    specification show the address as 8 bits, left justified with the R/W
+    bit as a write (0) making bit 0. Some vendors use only the 7 bits
+    to describe the address.
+    As mentioned in AMD's APML specification, The SB-RMI address is
+    normally 78h(0111 100W) or 3Ch(011 1100) for socket 0 and 70h(0111 000W)
+    or 38h(011 1000) for socket 1, but it could vary based on hardware
+    address select pins.
+
+    Datasheet: The SB-RMI interface and protocol along with the Advanced
+               Platform Management Link (APML) Specification is available
+               as part of the open source SoC register reference at:
+
+               https://www.amd.com/en/support/tech-docs?keyword=55898
+
+Author: Akshay Gupta <[email protected]>
+
+Description
+-----------
+
+The APML provides a way to communicate with the SB Remote Management interface
+(SB-RMI) module from the external SMBus master that can be used to report socket
+power on AMD platforms using mailbox command and resembles a typical 8-pin remote
+power sensor's I2C interface to BMC.
+
+This driver implements current power with power cap and power cap max.
+
+sysfs-Interface
+---------------
+Power sensors can be queried and set via the standard ``hwmon`` interface
+on ``sysfs``, under the directory ``/sys/class/hwmon/hwmonX`` for some value
+of ``X`` (search for the ``X`` such that ``/sys/class/hwmon/hwmonX/name`` has
+content ``sbrmi``)
+
+================ ===== ========================================================
+Name             Perm   Description
+================ ===== ========================================================
+power1_input     RO    Current Power consumed
+power1_cap       RW    Power limit can be set between 0 and power1_cap_max
+power1_cap_max   RO    Maximum powerlimit calculated and reported by the SMU FW
+================ ===== ========================================================
+
+The following example show how the 'Power' attribute from the i2c-addresses
+can be monitored using the userspace utilities like ``sensors`` binary::
+
+  # sensors
+  sbrmi-i2c-1-38
+  Adapter: bcm2835 I2C adapter
+  power1:       61.00 W (cap = 225.00 W)
+
+  sbrmi-i2c-1-3c
+  Adapter: bcm2835 I2C adapter
+  power1:       28.39 W (cap = 224.77 W)
+  #
+
+Also, Below shows how get and set the values from sysfs entries individually::
+  # cat /sys/class/hwmon/hwmon1/power1_cap_max
+  225000000
+
+  # echo 180000000 > /sys/class/hwmon/hwmon1/power1_cap
+  # cat /sys/class/hwmon/hwmon1/power1_cap
+  180000000
diff --git a/Documentation/hwmon/scpi-hwmon.rst b/Documentation/hwmon/scpi-hwmon.rst
@@ -32,5 +32,5 @@ Usage Notes
 
 The driver relies on device tree node to indicate the presence of SCPI
 support in the kernel. See
-Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the
+Documentation/devicetree/bindings/firmware/arm,scpi.yaml for details of the
 devicetree node.
diff --git a/Documentation/hwmon/sht4x.rst b/Documentation/hwmon/sht4x.rst
@@ -42,4 +42,4 @@ humidity1_input Measured humidity in %H
 update_interval The minimum interval for polling the sensor,
                 in milliseconds. Writable. Must be at least
                 2000.
-============== =============================================
+=============== ============================================
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1316,6 +1316,13 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/media/i2c/aptina-pll.*
 
+AQUACOMPUTER D5 NEXT PUMP SENSOR DRIVER
+M:	Aleksa Savic <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/hwmon/aquacomputer_d5next.rst
+F:	drivers/hwmon/aquacomputer_d5next.c
+
 AQUANTIA ETHERNET DRIVER (atlantic)
 M:	Igor Russkikh <[email protected]>
 L:	[email protected]

diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
@@ -25,6 +25,8 @@
 #define PCI_DEVICE_ID_AMD_17H_M60H_DF_F4 0x144c
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
 #define PCI_DEVICE_ID_AMD_19H_DF_F4	0x1654
+#define PCI_DEVICE_ID_AMD_19H_M40H_ROOT	0x14b5
+#define PCI_DEVICE_ID_AMD_19H_M40H_DF_F4 0x167d
 #define PCI_DEVICE_ID_AMD_19H_M50H_DF_F4 0x166e
 
 /* Protect the PCI config register pairs used for SMN and DF indirect access. */
@@ -37,6 +39,7 @@ static const struct pci_device_id amd_root_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_ROOT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_ROOT) },
 	{}
 };
 
@@ -58,6 +61,7 @@ static const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
 	{}
 };
@@ -74,6 +78,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
 	{}

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
@@ -254,6 +254,16 @@ config SENSORS_AHT10
 	  This driver can also be built as a module. If so, the module
 	  will be called aht10.
 
+config SENSORS_AQUACOMPUTER_D5NEXT
+	tristate "Aquacomputer D5 Next watercooling pump"
+	depends on USB_HID
+	help
+	  If you say yes here you get support for the Aquacomputer D5 Next
+	  watercooling pump sensors.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called aquacomputer_d5next.
+
 config SENSORS_AS370
 	tristate "Synaptics AS370 SoC hardware monitoring driver"
 	help
@@ -1551,6 +1561,16 @@ config SENSORS_SBTSI
 	  This driver can also be built as a module. If so, the module will
 	  be called sbtsi_temp.
 
+config SENSORS_SBRMI
+	tristate "Emulated SB-RMI sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for emulated RMI
+	  sensors on AMD SoCs with APML interface connected to a BMC device.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called sbrmi.
+
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 	depends on GPIOLIB || COMPILE_TEST

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
@@ -45,8 +45,8 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_AHT10)	+= aht10.o
-obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
+obj-$(CONFIG_SENSORS_AQUACOMPUTER_D5NEXT) += aquacomputer_d5next.o
 obj-$(CONFIG_SENSORS_ARM_SCMI)	+= scmi-hwmon.o
 obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_AS370)	+= as370-hwmon.o
@@ -164,6 +164,7 @@ obj-$(CONFIG_SENSORS_PWM_FAN)	+= pwm-fan.o
 obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)	+= raspberrypi-hwmon.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
+obj-$(CONFIG_SENSORS_SBRMI)	+= sbrmi.o
 obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o