Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
    including adding a missing ipv6 match description.

 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
    Bhat.

 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.

 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.

 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.

 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
    Chaignon.

 7) Multicast MAC limit test is off by one in qede, from Manish Chopra.

 8) Fix established socket lookup race when socket goes from
    TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
    RCU grace period. From Eric Dumazet.

 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.

10) Fix active backup transition after link failure in bonding, from
    Mahesh Bandewar.

11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.

12) Fix wrong interface passed to ->mac_link_up(), from Russell King.

13) Fix DSA egress flooding settings in b53, from Florian Fainelli.

14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.

15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.

16) Reject invalid MTU values in stmmac, from Jose Abreu.

17) Fix refcount leak in error path of u32 classifier, from Davide
    Caratti.

18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
    Kaseorg.

19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.

20) Disable hardware GRO when XDP is attached to qede, frm Manish
    Chopra.

21) Since we encode state in the low pointer bits, dst metrics must be
    at least 4 byte aligned, which is not necessarily true on m68k. Add
    annotations to fix this, from Geert Uytterhoeven.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
  sfc: Include XDP packet headroom in buffer step size.
  sfc: fix channel allocation with brute force
  net: dst: Force 4-byte alignment of dst_metrics
  selftests: pmtu: fix init mtu value in description
  hv_netvsc: Fix unwanted rx_table reset
  net: phy: ensure that phy IDs are correctly typed
  mod_devicetable: fix PHY module format
  qede: Disable hardware gro when xdp prog is installed
  net: ena: fix issues in setting interrupt moderation params in ethtool
  net: ena: fix default tx interrupt moderation interval
  net/smc: unregister ib devices in reboot_event
  net: stmmac: platform: Fix MDIO init for platforms without PHY
  llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
  net: hisilicon: Fix a BUG trigered by wrong bytes_compl
  net: dsa: ksz: use common define for tag len
  s390/qeth: don't return -ENOTSUPP to userspace
  s390/qeth: fix promiscuous mode after reset
  s390/qeth: handle error due to unsupported transport mode
  cxgb4: fix refcount init for TC-MQPRIO offload
  tc-testing: initial tdc selftests for cls_u32
  ...

.mailmap

@@ -266,6 +266,7 @@ Vinod Koul <[email protected]> <[email protected]>
 Viresh Kumar <[email protected]> <[email protected]>
 Viresh Kumar <[email protected]> <[email protected]>
 Viresh Kumar <[email protected]> <[email protected]>
+Vivien Didelot <[email protected]> <[email protected]>
 Vlad Dogaru <[email protected]> <[email protected]>
 Vladimir Davydov <[email protected]> <[email protected]>
 Vladimir Davydov <[email protected]> <[email protected]>

Documentation/devicetree/bindings/net/can/tcan4x5x.txt

@@ -10,7 +10,6 @@ Required properties:
 	- #size-cells: 0
 	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
 			     operate at should be less than or equal to 18 MHz.
-	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
 	- interrupt-parent: the phandle to the interrupt controller which provides
                     the interrupt.
 	- interrupts: interrupt specification for data-ready.
@@ -23,6 +22,7 @@ Optional properties:
 		       reset.
 	- device-state-gpios: Input GPIO that indicates if the device is in
 			      a sleep state or if the device is active.
+	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
@@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 {
 		interrupts = <14 GPIO_ACTIVE_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
 };

Documentation/networking/j1939.rst

@@ -339,7 +339,7 @@ To claim an address following code example can be used:
 			.pgn = J1939_PGN_ADDRESS_CLAIMED,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
-			.pgn = J1939_PGN_ADDRESS_REQUEST,
+			.pgn = J1939_PGN_REQUEST,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
 			.pgn = J1939_PGN_ADDRESS_COMMANDED,

MAINTAINERS

@@ -10110,6 +10110,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-maxiradio*
 
 MCAN MMIO DEVICE DRIVER
+M:	Dan Murphy <[email protected]>
 M:	Sriram Dash <[email protected]>
 L:	[email protected]
 S:	Maintained
@@ -13710,6 +13711,15 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/iommu/qcom_iommu.c
 
+QUALCOMM RMNET DRIVER
+M:	Subash Abhinov Kasiviswanathan <[email protected]>
+M:	Sean Tranchetti <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/net/ethernet/qualcomm/rmnet/
+F:	Documentation/networking/device_drivers/qualcomm/rmnet.txt
+F:	include/linux/if_rmnet.h
+
 QUALCOMM TSENS THERMAL DRIVER
 M:	Amit Kucheria <[email protected]>
 L:	[email protected]
@@ -16533,6 +16543,13 @@ L:	[email protected] (moderated for non-subscribers)
 S:	Odd Fixes
 F:	sound/soc/codecs/tas571x*
 
+TI TCAN4X5X DEVICE DRIVER
+M:	Dan Murphy <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+F:	drivers/net/can/m_can/tcan4x5x.c
+
 TI TRF7970A NFC DRIVER
 M:	Mark Greer <[email protected]>
 L:	[email protected]

arch/mips/net/ebpf_jit.c

@@ -604,6 +604,7 @@ static void emit_const_to_reg(struct jit_ctx *ctx, int dst, u64 value)
 static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
 {
 	int off, b_off;
+	int tcc_reg;
 
 	ctx->flags |= EBPF_SEEN_TC;
 	/*
@@ -616,14 +617,14 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
 	b_off = b_imm(this_idx + 1, ctx);
 	emit_instr(ctx, bne, MIPS_R_AT, MIPS_R_ZERO, b_off);
 	/*
-	 * if (--TCC < 0)
+	 * if (TCC-- < 0)
 	 *     goto out;
 	 */
 	/* Delay slot */
-	emit_instr(ctx, daddiu, MIPS_R_T5,
-		   (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4, -1);
+	tcc_reg = (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4;
+	emit_instr(ctx, daddiu, MIPS_R_T5, tcc_reg, -1);
 	b_off = b_imm(this_idx + 1, ctx);
-	emit_instr(ctx, bltz, MIPS_R_T5, b_off);
+	emit_instr(ctx, bltz, tcc_reg, b_off);
 	/*
 	 * prog = array->ptrs[index];
 	 * if (prog == NULL)

arch/riscv/net/bpf_jit_comp.c

@@ -631,14 +631,14 @@ static int emit_bpf_tail_call(int insn, struct rv_jit_context *ctx)
 		return -1;
 	emit(rv_bgeu(RV_REG_A2, RV_REG_T1, off >> 1), ctx);
 
-	/* if (--TCC < 0)
+	/* if (TCC-- < 0)
 	 *     goto out;
 	 */
 	emit(rv_addi(RV_REG_T1, tcc, -1), ctx);
 	off = (tc_ninsn - (ctx->ninsns - start_insn)) << 2;
 	if (is_13b_check(off, insn))
 		return -1;
-	emit(rv_blt(RV_REG_T1, RV_REG_ZERO, off >> 1), ctx);
+	emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
 
 	/* prog = array->ptrs[index];
 	 * if (!prog)

drivers/net/bonding/bond_main.c

@@ -2272,9 +2272,6 @@ static void bond_miimon_commit(struct bonding *bond)
 			} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
 				/* make it immediately active */
 				bond_set_active_slave(slave);
-			} else if (slave != primary) {
-				/* prevent it from being the active one */
-				bond_set_backup_slave(slave);
 			}
 
 			slave_info(bond->dev, slave->dev, "link status definitely up, %u Mbps %s duplex\n",
@@ -3702,32 +3699,35 @@ static int bond_neigh_init(struct neighbour *n)
 	const struct net_device_ops *slave_ops;
 	struct neigh_parms parms;
 	struct slave *slave;
-	int ret;
+	int ret = 0;
 
-	slave = bond_first_slave(bond);
+	rcu_read_lock();
+	slave = bond_first_slave_rcu(bond);
 	if (!slave)
-		return 0;
+		goto out;
 	slave_ops = slave->dev->netdev_ops;
 	if (!slave_ops->ndo_neigh_setup)
-		return 0;
-
-	parms.neigh_setup = NULL;
-	parms.neigh_cleanup = NULL;
-	ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
-	if (ret)
-		return ret;
+		goto out;
 
-	/* Assign slave's neigh_cleanup to neighbour in case cleanup is called
-	 * after the last slave has been detached.  Assumes that all slaves
-	 * utilize the same neigh_cleanup (true at this writing as only user
-	 * is ipoib).
+	/* TODO: find another way [1] to implement this.
+	 * Passing a zeroed structure is fragile,
+	 * but at least we do not pass garbage.
+	 *
+	 * [1] One way would be that ndo_neigh_setup() never touch
+	 *     struct neigh_parms, but propagate the new neigh_setup()
+	 *     back to ___neigh_create() / neigh_parms_alloc()
 	 */
-	n->parms->neigh_cleanup = parms.neigh_cleanup;
+	memset(&parms, 0, sizeof(parms));
+	ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
 
-	if (!parms.neigh_setup)
-		return 0;
+	if (ret)
+		goto out;
 
-	return parms.neigh_setup(n);
+	if (parms.neigh_setup)
+		ret = parms.neigh_setup(n);
+out:
+	rcu_read_unlock();
+	return ret;
 }
 
 /* The bonding ndo_neigh_setup is called at init time beofre any

drivers/net/can/flexcan.c

@@ -389,6 +389,34 @@ static struct flexcan_mb __iomem *flexcan_get_mb(const struct flexcan_priv *priv
 		(&priv->regs->mb[bank][priv->mb_size * mb_index]);
 }
 
+static int flexcan_low_power_enter_ack(struct flexcan_priv *priv)
+{
+	struct flexcan_regs __iomem *regs = priv->regs;
+	unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
+
+	while (timeout-- && !(priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK))
+		udelay(10);
+
+	if (!(priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int flexcan_low_power_exit_ack(struct flexcan_priv *priv)
+{
+	struct flexcan_regs __iomem *regs = priv->regs;
+	unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
+
+	while (timeout-- && (priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK))
+		udelay(10);
+
+	if (priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
 static void flexcan_enable_wakeup_irq(struct flexcan_priv *priv, bool enable)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
@@ -407,7 +435,6 @@ static void flexcan_enable_wakeup_irq(struct flexcan_priv *priv, bool enable)
 static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
-	unsigned int ackval;
 	u32 reg_mcr;
 
 	reg_mcr = priv->read(&regs->mcr);
@@ -418,36 +445,24 @@ static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
 	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
 			   1 << priv->stm.req_bit, 1 << priv->stm.req_bit);
 
-	/* get stop acknowledgment */
-	if (regmap_read_poll_timeout(priv->stm.gpr, priv->stm.ack_gpr,
-				     ackval, ackval & (1 << priv->stm.ack_bit),
-				     0, FLEXCAN_TIMEOUT_US))
-		return -ETIMEDOUT;
-
-	return 0;
+	return flexcan_low_power_enter_ack(priv);
 }
 
 static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
-	unsigned int ackval;
 	u32 reg_mcr;
 
 	/* remove stop request */
 	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
 			   1 << priv->stm.req_bit, 0);
 
-	/* get stop acknowledgment */
-	if (regmap_read_poll_timeout(priv->stm.gpr, priv->stm.ack_gpr,
-				     ackval, !(ackval & (1 << priv->stm.ack_bit)),
-				     0, FLEXCAN_TIMEOUT_US))
-		return -ETIMEDOUT;
 
 	reg_mcr = priv->read(&regs->mcr);
 	reg_mcr &= ~FLEXCAN_MCR_SLF_WAK;
 	priv->write(reg_mcr, &regs->mcr);
 
-	return 0;
+	return flexcan_low_power_exit_ack(priv);
 }
 
 static inline void flexcan_error_irq_enable(const struct flexcan_priv *priv)
@@ -506,39 +521,25 @@ static inline int flexcan_transceiver_disable(const struct flexcan_priv *priv)
 static int flexcan_chip_enable(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
-	unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
 	u32 reg;
 
 	reg = priv->read(&regs->mcr);
 	reg &= ~FLEXCAN_MCR_MDIS;
 	priv->write(reg, &regs->mcr);
 
-	while (timeout-- && (priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK))
-		udelay(10);
-
-	if (priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK)
-		return -ETIMEDOUT;
-
-	return 0;
+	return flexcan_low_power_exit_ack(priv);
 }
 
 static int flexcan_chip_disable(struct flexcan_priv *priv)
 {
 	struct flexcan_regs __iomem *regs = priv->regs;
-	unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
 	u32 reg;
 
 	reg = priv->read(&regs->mcr);
 	reg |= FLEXCAN_MCR_MDIS;
 	priv->write(reg, &regs->mcr);
 
-	while (timeout-- && !(priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK))
-		udelay(10);
-
-	if (!(priv->read(&regs->mcr) & FLEXCAN_MCR_LPM_ACK))
-		return -ETIMEDOUT;
-
-	return 0;
+	return flexcan_low_power_enter_ack(priv);
 }
 
 static int flexcan_chip_freeze(struct flexcan_priv *priv)
@@ -1722,6 +1723,9 @@ static int __maybe_unused flexcan_resume(struct device *device)
 		netif_start_queue(dev);
 		if (device_may_wakeup(device)) {
 			disable_irq_wake(dev->irq);
+			err = flexcan_exit_stop_mode(priv);
+			if (err)
+				return err;
 		} else {
 			err = pm_runtime_force_resume(device);
 			if (err)
@@ -1767,14 +1771,9 @@ static int __maybe_unused flexcan_noirq_resume(struct device *device)
 {
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
-	int err;
 
-	if (netif_running(dev) && device_may_wakeup(device)) {
+	if (netif_running(dev) && device_may_wakeup(device))
 		flexcan_enable_wakeup_irq(priv, false);
-		err = flexcan_exit_stop_mode(priv);
-		if (err)
-			return err;
-	}
 
 	return 0;
 }