Added extra clarification to documentation

README.md

@@ -15,7 +15,7 @@ Use the analog stick to bring the cursor to the top-right corner, then press the
 Each line is printed from right to left in order to avoid pixel skipping issues. Currently there are also issues printing to the right and bottom edges. This repository has been tested using a Teensy 2.0++.
 
 #### Compiling and Flashing onto the Teensy 2.0++
-Go to the Teensy website and download/install the [Teensy Loader application](https://www.pjrc.com/teensy/loader.html). Then, follow their instructions on installing the [GCC Compiler and Tools](https://www.pjrc.com/teensy/gcc.html). (Note for Mac users - the AVR MacPack is now called AVR CrossPack. If that does not work, you can try installing avr-gcc with brew.) Next, you need to grab the LUFA library. You can download it in a zipped folder at the bottom of [this page](http://www.fourwalledcubicle.com/LUFA.php). Unzip the folder and place it where you like. Then, download or clone the contents of this repository onto your computer. Next, you'll need to make sure the `LUFA_PATH` inside of the `makefile` points to the `LUFA` subdirectory inside your `LUFA` directory. My `Switch-Fightstick` directory is in the same directory as my `LUFA` directory, so I set `LUFA_PATH = ../LUFA/LUFA`.
+Go to the Teensy website and download/install the [Teensy Loader application](https://www.pjrc.com/teensy/loader.html). Then, follow their instructions on installing the [GCC Compiler and Tools](https://www.pjrc.com/teensy/gcc.html). (Note for Mac users - the AVR MacPack is now called AVR CrossPack. If that does not work, you can try installing avr-gcc with brew.) Next, you need to grab the LUFA library. You can download it in a zipped folder at the bottom of [this page](http://www.fourwalledcubicle.com/LUFA.php). Unzip the folder, rename it `LUFA`, and place it where you like. Then, download or clone the contents of this repository onto your computer. Next, you'll need to make sure the `LUFA_PATH` inside of the `makefile` points to the `LUFA` subdirectory inside your `LUFA` directory. My `Switch-Fightstick` directory is in the same directory as my `LUFA` directory, so I set `LUFA_PATH = ../LUFA/LUFA`.
 Now you should be ready to rock. Open a terminal window in the `Switch-Fightstick` directory, type `make`, and hit enter to compile. If all goes well, the printout in the terminal will let you know it finished the build! Follow the directions on flashing `Joystick.hex` onto your Teensy, which can be found page where you downloaded the Teensy Loader application.
 
 #### Using your own image