uboot:s3c2440:copy the s3c2440 config from 2016.5-version to 2018.5-v…

…ersion

now the u-boot can generate the u-boot.bin for the s3c2440 platform.
we can take it as the start point.

Signed-off-by: Zhigang Wu <[email protected]>

Makefile

@@ -902,9 +902,9 @@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 
 cfg: u-boot.cfg
 
-quiet_cmd_cfgcheck = CFGCHK  $2
-cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
-		$(srctree)/scripts/config_whitelist.txt $(srctree)
+#quiet_cmd_cfgcheck = CFGCHK  $2
+#cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
+#		$(srctree)/scripts/config_whitelist.txt $(srctree)
 
 all:		$(ALL-y) cfg
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)

arch/arm/Kconfig

@@ -1350,6 +1350,10 @@ config ARCH_ASPEED
 	select OF_CONTROL
 	imply CMD_DM
 
+config TARGET_SMDK2440
+	bool "Support smdk2440"
+	select CPU_ARM920T
+
 endchoice
 
 config TI_SECURE_DEVICE
@@ -1507,6 +1511,7 @@ source "board/xilinx/Kconfig"
 source "board/xilinx/zynq/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
 source "board/zipitz2/Kconfig"
+source "board/samsung/smdk2440/Kconfig"
 
 source "arch/arm/Kconfig.debug"
 

arch/arm/cpu/arm920t/Makefile

@@ -9,6 +9,7 @@ obj-y	+= cpu.o
 
 obj-$(CONFIG_EP93XX) += ep93xx/
 obj-$(CONFIG_IMX) += imx/
+obj-$(CONFIG_S3C24X0) += s3c24x0/
 
 # some files can only build in ARM mode
 

arch/arm/cpu/arm920t/s3c24x0/Makefile

@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, [email protected].
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_USE_IRQ) += interrupts.o
+obj-$(CONFIG_DISPLAY_CPUINFO)	+= cpu_info.o
+obj-y	+= speed.o
+obj-y	+= timer.o

arch/arm/cpu/arm920t/s3c24x0/cpu_info.c

@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2010
+ * David Mueller <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/s3c24x0_cpu.h>
+
+typedef ulong (*getfreq)(void);
+
+static const getfreq freq_f[] = {
+	get_FCLK,
+	get_HCLK,
+	get_PCLK,
+};
+
+static const char freq_c[] = { 'F', 'H', 'P' };
+
+int print_cpuinfo(void)
+{
+	int i;
+	char buf[32];
+/* the S3C2400 seems to be lacking a CHIP ID register */
+#ifndef CONFIG_S3C2400
+	ulong cpuid;
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+
+	cpuid = readl(&gpio->gstatus1);
+	printf("CPUID: %8lX\n", cpuid);
+#endif
+	for (i = 0; i < ARRAY_SIZE(freq_f); i++)
+		printf("%cCLK: %8s MHz\n", freq_c[i], strmhz(buf, freq_f[i]()));
+
+	return 0;
+}

arch/arm/cpu/arm920t/s3c24x0/interrupts.c

@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <[email protected]>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <[email protected]>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/arch/s3c24x0_cpu.h>
+#include <asm/proc-armv/ptrace.h>
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
+	u_int32_t intpnd = readl(&irq->INTPND);
+
+}

arch/arm/cpu/arm920t/s3c24x0/speed.c

@@ -0,0 +1,102 @@
+/*
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, [email protected].
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, [email protected]
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* This code should work for both the S3C2400 and the S3C2410
+ * as they seem to have the same PLL and clock machinery inside.
+ * The different address mapping is handled by the s3c24xx.h files below.
+ */
+
+#include <common.h>
+#ifdef CONFIG_S3C24X0
+
+#include <asm/io.h>
+#include <asm/arch/s3c24x0_cpu.h>
+
+#define MPLL 0
+#define UPLL 1
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+static ulong get_PLLCLK(int pllreg)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	ulong r, m, p, s;
+
+	if (pllreg == MPLL)
+		r = readl(&clk_power->mpllcon);
+	else if (pllreg == UPLL)
+		r = readl(&clk_power->upllcon);
+	else
+		hang();
+
+	m = ((r & 0xFF000) >> 12) + 8;
+	p = ((r & 0x003F0) >> 4) + 2;
+	s = r & 0x3;
+
+#if defined(CONFIG_S3C2440)
+	if (pllreg == MPLL)
+		return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
+#endif
+	return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
+
+}
+
+/* return FCLK frequency */
+ulong get_FCLK(void)
+{
+	return get_PLLCLK(MPLL);
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+#ifdef CONFIG_S3C2440
+	switch (readl(&clk_power->clkdivn) & 0x6) {
+	default:
+	case 0:
+		return get_FCLK();
+	case 2:
+		return get_FCLK() / 2;
+	case 4:
+		return (readl(&clk_power->camdivn) & (1 << 9)) ?
+			get_FCLK() / 8 : get_FCLK() / 4;
+	case 6:
+		return (readl(&clk_power->camdivn) & (1 << 8)) ?
+			get_FCLK() / 6 : get_FCLK() / 3;
+	}
+#else
+	return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK();
+#endif
+}
+
+/* return PCLK frequency */
+ulong get_PCLK(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+
+	return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK();
+}
+
+/* return UCLK frequency */
+ulong get_UCLK(void)
+{
+	return get_PLLCLK(UPLL);
+}
+
+#endif /* CONFIG_S3C24X0 */

arch/arm/cpu/arm920t/s3c24x0/timer.c

@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <[email protected]>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <[email protected]>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#ifdef CONFIG_S3C24X0
+
+#include <asm/io.h>
+#include <asm/arch/s3c24x0_cpu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int timer_init(void)
+{
+	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
+	ulong tmr;
+
+	/* use PWM Timer 4 because it has no output */
+	/* prescaler for Timer 4 is 16 */
+	writel(0x0f00, &timers->tcfg0);
+	if (gd->arch.tbu == 0) {
+		/*
+		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
+		 * (default) and prescaler = 16. Should be 10390
+		 * @33.25MHz and 15625 @ 50 MHz
+		 */
+		gd->arch.tbu = get_PCLK() / (2 * 16 * 100);
+		gd->arch.timer_rate_hz = get_PCLK() / (2 * 16);
+	}
+	/* load value for 10 ms timeout */
+	writel(gd->arch.tbu, &timers->tcntb4);
+	/* auto load, manual update of timer 4 */
+	tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
+	writel(tmr, &timers->tcon);
+	/* auto load, start timer 4 */
+	tmr = (tmr & ~0x0700000) | 0x0500000;
+	writel(tmr, &timers->tcon);
+	gd->arch.lastinc = 0;
+	gd->arch.tbl = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void __udelay (unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_ticks();
+
+	tmo = usec / 1000;
+	tmo *= (gd->arch.tbu * 100);
+	tmo /= 1000;
+
+	while ((ulong) (get_ticks() - start) < tmo)
+		/*NOP*/;
+}
+
+ulong get_timer_masked(void)
+{
+	ulong tmr = get_ticks();
+
+	return tmr / (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
+}
+
+void udelay_masked(unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= (gd->arch.tbu * 100);
+		tmo /= 1000;
+	} else {
+		tmo = usec * (gd->arch.tbu * 100);
+		tmo /= (1000 * 1000);
+	}
+
+	endtime = get_ticks() + tmo;
+
+	do {
+		ulong now = get_ticks();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
+	ulong now = readl(&timers->tcnto4) & 0xffff;
+
+	if (gd->arch.lastinc >= now) {
+		/* normal mode */
+		gd->arch.tbl += gd->arch.lastinc - now;
+	} else {
+		/* we have an overflow ... */
+		gd->arch.tbl += gd->arch.lastinc + gd->arch.tbu - now;
+	}
+	gd->arch.lastinc = now;
+
+	return gd->arch.tbl;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
+
+/*
+ * reset the cpu by setting up the watchdog timer and let him time out
+ */
+void reset_cpu(ulong ignored)
+{
+	struct s3c24x0_watchdog *watchdog;
+
+	watchdog = s3c24x0_get_base_watchdog();
+
+	/* Disable watchdog */
+	writel(0x0000, &watchdog->wtcon);
+
+	/* Initialize watchdog timer count register */
+	writel(0x0001, &watchdog->wtcnt);
+
+	/* Enable watchdog timer; assert reset at timer timeout */
+	writel(0x0021, &watchdog->wtcon);
+
+	while (1)
+		/* loop forever and wait for reset to happen */;
+
+	/*NOTREACHED*/
+}
+
+#endif /* CONFIG_S3C24X0 */