Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits)
  apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
  apic, x86: Check if EILVT APIC registers are available (AMD only)
  x86: ioapic: Call free_irte only if interrupt remapping enabled
  arm: Use ARCH_IRQ_INIT_FLAGS
  genirq, ARM: Fix boot on ARM platforms
  genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
  x86: Switch sparse_irq allocations to GFP_KERNEL
  genirq: Switch sparse_irq allocator to GFP_KERNEL
  genirq: Make sparse_lock a mutex
  x86: lguest: Use new irq allocator
  genirq: Remove the now unused sparse irq leftovers
  genirq: Sanitize dynamic irq handling
  genirq: Remove arch_init_chip_data()
  x86: xen: Sanitise sparse_irq handling
  x86: Use sane enumeration
  x86: uv: Clean up the direct access to irq_desc
  x86: Make io_apic.c local functions static
  genirq: Remove irq_2_iommu
  x86: Speed up the irq_remapped check in hot pathes
  intr_remap: Simplify the code further
  ...

Fix up trivial conflicts in arch/x86/Kconfig

Documentation/DocBook/genericirq.tmpl

@@ -28,7 +28,7 @@
   </authorgroup>
 
   <copyright>
-   <year>2005-2006</year>
+   <year>2005-2010</year>
    <holder>Thomas Gleixner</holder>
   </copyright>
   <copyright>
@@ -100,6 +100,10 @@
 	  <listitem><para>Edge type</para></listitem>
 	  <listitem><para>Simple type</para></listitem>
 	</itemizedlist>
+	During the implementation we identified another type:
+	<itemizedlist>
+	  <listitem><para>Fast EOI type</para></listitem>
+	</itemizedlist>
 	In the SMP world of the __do_IRQ() super-handler another type
 	was identified:
 	<itemizedlist>
@@ -153,6 +157,7 @@
 	is still available. This leads to a kind of duality for the time
 	being. Over time the new model should be used in more and more
 	architectures, as it enables smaller and cleaner IRQ subsystems.
+	It's deprecated for three years now and about to be removed.
 	</para>
   </chapter>
   <chapter id="bugs">
@@ -217,6 +222,7 @@
 	  <itemizedlist>
 	  <listitem><para>handle_level_irq</para></listitem>
 	  <listitem><para>handle_edge_irq</para></listitem>
+	  <listitem><para>handle_fasteoi_irq</para></listitem>
 	  <listitem><para>handle_simple_irq</para></listitem>
 	  <listitem><para>handle_percpu_irq</para></listitem>
 	  </itemizedlist>
@@ -233,33 +239,33 @@
 		are used by the default flow implementations.
 		The following helper functions are implemented (simplified excerpt):
 		<programlisting>
-default_enable(irq)
+default_enable(struct irq_data *data)
 {
-	desc->chip->unmask(irq);
+	desc->chip->irq_unmask(data);
 }
 
-default_disable(irq)
+default_disable(struct irq_data *data)
 {
-	if (!delay_disable(irq))
-		desc->chip->mask(irq);
+	if (!delay_disable(data))
+		desc->chip->irq_mask(data);
 }
 
-default_ack(irq)
+default_ack(struct irq_data *data)
 {
-	chip->ack(irq);
+	chip->irq_ack(data);
 }
 
-default_mask_ack(irq)
+default_mask_ack(struct irq_data *data)
 {
-	if (chip->mask_ack) {
-		chip->mask_ack(irq);
+	if (chip->irq_mask_ack) {
+		chip->irq_mask_ack(data);
 	} else {
-		chip->mask(irq);
-		chip->ack(irq);
+		chip->irq_mask(data);
+		chip->irq_ack(data);
 	}
 }
 
-noop(irq)
+noop(struct irq_data *data))
 {
 }
 
@@ -278,12 +284,27 @@ noop(irq)
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->start();
+desc->chip->irq_mask();
 handle_IRQ_event(desc->action);
-desc->chip->end();
+desc->chip->irq_unmask();
 		</programlisting>
 		</para>
-   	    </sect3>
+	    </sect3>
+	    <sect3 id="Default_FASTEOI_IRQ_flow_handler">
+		<title>Default Fast EOI IRQ flow handler</title>
+		<para>
+		handle_fasteoi_irq provides a generic implementation
+		for interrupts, which only need an EOI at the end of
+		the handler
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+handle_IRQ_event(desc->action);
+desc->chip->irq_eoi();
+		</programlisting>
+		</para>
+	    </sect3>
 	    <sect3 id="Default_Edge_IRQ_flow_handler">
 	 	<title>Default Edge IRQ flow handler</title>
 		<para>
@@ -294,20 +315,19 @@ desc->chip->end();
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
 if (desc->status &amp; running) {
-	desc->chip->hold();
+	desc->chip->irq_mask();
 	desc->status |= pending | masked;
 	return;
 }
-desc->chip->start();
+desc->chip->irq_ack();
 desc->status |= running;
 do {
 	if (desc->status &amp; masked)
-		desc->chip->enable();
+		desc->chip->irq_unmask();
 	desc->status &amp;= ~pending;
 	handle_IRQ_event(desc->action);
 } while (status &amp; pending);
 desc->status &amp;= ~running;
-desc->chip->end();
 		</programlisting>
 		</para>
    	    </sect3>
@@ -342,9 +362,9 @@ handle_IRQ_event(desc->action);
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->start();
 handle_IRQ_event(desc->action);
-desc->chip->end();
+if (desc->chip->irq_eoi)
+        desc->chip->irq_eoi();
 		</programlisting>
 		</para>
    	    </sect3>
@@ -375,8 +395,7 @@ desc->chip->end();
 	mechanism. (It's necessary to enable CONFIG_HARDIRQS_SW_RESEND when
 	you want to use the delayed interrupt disable feature and your
 	hardware is not capable of retriggering	an interrupt.)
-	The delayed interrupt disable can be runtime enabled, per interrupt,
-	by setting the IRQ_DELAYED_DISABLE flag in the irq_desc status field.
+	The delayed interrupt disable is not configurable.
 	</para>
 	</sect2>
     </sect1>
@@ -387,13 +406,13 @@ desc->chip->end();
 	contains all the direct chip relevant functions, which
 	can be utilized by the irq flow implementations.
 	  <itemizedlist>
-	  <listitem><para>ack()</para></listitem>
-	  <listitem><para>mask_ack() - Optional, recommended for performance</para></listitem>
-	  <listitem><para>mask()</para></listitem>
-	  <listitem><para>unmask()</para></listitem>
-	  <listitem><para>retrigger() - Optional</para></listitem>
-	  <listitem><para>set_type() - Optional</para></listitem>
-	  <listitem><para>set_wake() - Optional</para></listitem>
+	  <listitem><para>irq_ack()</para></listitem>
+	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
+	  <listitem><para>irq_mask()</para></listitem>
+	  <listitem><para>irq_unmask()</para></listitem>
+	  <listitem><para>irq_retrigger() - Optional</para></listitem>
+	  <listitem><para>irq_set_type() - Optional</para></listitem>
+	  <listitem><para>irq_set_wake() - Optional</para></listitem>
 	  </itemizedlist>
 	These primitives are strictly intended to mean what they say: ack means
 	ACK, masking means masking of an IRQ line, etc. It is up to the flow
@@ -458,6 +477,7 @@ desc->chip->end();
      <para>
      This chapter contains the autogenerated documentation of the internal functions.
      </para>
+!Ikernel/irq/irqdesc.c
 !Ikernel/irq/handle.c
 !Ikernel/irq/chip.c
   </chapter>

MAINTAINERS

@@ -3241,6 +3241,12 @@ F:	drivers/net/irda/
 F:	include/net/irda/
 F:	net/irda/
 
+IRQ SUBSYSTEM
+M:	Thomas Gleixner <[email protected]>
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+F:	kernel/irq/
+
 ISAPNP
 M:	Jaroslav Kysela <[email protected]>
 S:	Maintained

arch/arm/include/asm/hw_irq.h

@@ -24,4 +24,6 @@ void set_irq_flags(unsigned int irq, unsigned int flags);
 #define IRQF_PROBE	(1 << 1)
 #define IRQF_NOAUTOEN	(1 << 2)
 
+#define ARCH_IRQ_INIT_FLAGS	(IRQ_NOREQUEST | IRQ_NOPROBE)
+
 #endif

arch/arm/kernel/irq.c

@@ -154,22 +154,14 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 
 void __init init_IRQ(void)
 {
-	struct irq_desc *desc;
-	int irq;
-
-	for (irq = 0; irq < nr_irqs; irq++) {
-		desc = irq_to_desc_alloc_node(irq, 0);
-		desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE;
-	}
-
 	init_arch_irq();
 }
 
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
 	nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS;
-	return 0;
+	return nr_irqs;
 }
 #endif
 

arch/arm/mach-bcmring/irq.c

@@ -67,21 +67,21 @@ static void bcmring_unmask_irq2(unsigned int irq)
 }
 
 static struct irq_chip bcmring_irq0_chip = {
-	.typename = "ARM-INTC0",
+	.name = "ARM-INTC0",
 	.ack = bcmring_mask_irq0,
 	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
 	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
 };
 
 static struct irq_chip bcmring_irq1_chip = {
-	.typename = "ARM-INTC1",
+	.name = "ARM-INTC1",
 	.ack = bcmring_mask_irq1,
 	.mask = bcmring_mask_irq1,
 	.unmask = bcmring_unmask_irq1,
 };
 
 static struct irq_chip bcmring_irq2_chip = {
-	.typename = "ARM-SINTC",
+	.name = "ARM-SINTC",
 	.ack = bcmring_mask_irq2,
 	.mask = bcmring_mask_irq2,
 	.unmask = bcmring_unmask_irq2,

arch/arm/mach-iop13xx/msi.c

@@ -164,10 +164,10 @@ static void iop13xx_msi_nop(unsigned int irq)
 static struct irq_chip iop13xx_msi_chip = {
 	.name = "PCI-MSI",
 	.ack = iop13xx_msi_nop,
-	.enable = unmask_msi_irq,
-	.disable = mask_msi_irq,
-	.mask = mask_msi_irq,
-	.unmask = unmask_msi_irq,
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
 };
 
 int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)

arch/ia64/kernel/msi_ia64.c

@@ -104,8 +104,8 @@ static int ia64_msi_retrigger_irq(unsigned int irq)
  */
 static struct irq_chip ia64_msi_chip = {
 	.name		= "PCI-MSI",
-	.mask		= mask_msi_irq,
-	.unmask		= unmask_msi_irq,
+	.irq_mask	= mask_msi_irq,
+	.irq_unmask	= unmask_msi_irq,
 	.ack		= ia64_ack_msi_irq,
 #ifdef CONFIG_SMP
 	.set_affinity	= ia64_set_msi_irq_affinity,
@@ -160,8 +160,8 @@ static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 static struct irq_chip dmar_msi_type = {
 	.name = "DMAR_MSI",
-	.unmask = dmar_msi_unmask,
-	.mask = dmar_msi_mask,
+	.irq_unmask = dmar_msi_unmask,
+	.irq_mask = dmar_msi_mask,
 	.ack = ia64_ack_msi_irq,
 #ifdef CONFIG_SMP
 	.set_affinity = dmar_msi_set_affinity,

arch/ia64/sn/kernel/msi_sn.c

@@ -228,8 +228,8 @@ static int sn_msi_retrigger_irq(unsigned int irq)
 
 static struct irq_chip sn_msi_chip = {
 	.name		= "PCI-MSI",
-	.mask		= mask_msi_irq,
-	.unmask		= unmask_msi_irq,
+	.irq_mask	= mask_msi_irq,
+	.irq_unmask	= unmask_msi_irq,
 	.ack		= sn_ack_msi_irq,
 #ifdef CONFIG_SMP
 	.set_affinity	= sn_set_msi_irq_affinity,

arch/m32r/kernel/irq.c

@@ -51,7 +51,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
-		seq_printf(p, " %14s", irq_desc[i].chip->typename);
+		seq_printf(p, " %14s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)

arch/m32r/platforms/m32104ut/setup.c

@@ -65,7 +65,7 @@ static void shutdown_m32104ut_irq(unsigned int irq)
 
 static struct irq_chip m32104ut_irq_type =
 {
-	.typename = "M32104UT-IRQ",
+	.name = "M32104UT-IRQ",
 	.startup = startup_m32104ut_irq,
 	.shutdown = shutdown_m32104ut_irq,
 	.enable = enable_m32104ut_irq,

arch/m32r/platforms/m32700ut/setup.c

@@ -71,7 +71,7 @@ static void shutdown_m32700ut_irq(unsigned int irq)
 
 static struct irq_chip m32700ut_irq_type =
 {
-	.typename = "M32700UT-IRQ",
+	.name = "M32700UT-IRQ",
 	.startup = startup_m32700ut_irq,
 	.shutdown = shutdown_m32700ut_irq,
 	.enable = enable_m32700ut_irq,
@@ -148,7 +148,7 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq)
 
 static struct irq_chip m32700ut_pld_irq_type =
 {
-	.typename = "M32700UT-PLD-IRQ",
+	.name = "M32700UT-PLD-IRQ",
 	.startup = startup_m32700ut_pld_irq,
 	.shutdown = shutdown_m32700ut_pld_irq,
 	.enable = enable_m32700ut_pld_irq,
@@ -217,7 +217,7 @@ static void shutdown_m32700ut_lanpld_irq(unsigned int irq)
 
 static struct irq_chip m32700ut_lanpld_irq_type =
 {
-	.typename = "M32700UT-PLD-LAN-IRQ",
+	.name = "M32700UT-PLD-LAN-IRQ",
 	.startup = startup_m32700ut_lanpld_irq,
 	.shutdown = shutdown_m32700ut_lanpld_irq,
 	.enable = enable_m32700ut_lanpld_irq,
@@ -286,7 +286,7 @@ static void shutdown_m32700ut_lcdpld_irq(unsigned int irq)
 
 static struct irq_chip m32700ut_lcdpld_irq_type =
 {
-	.typename = "M32700UT-PLD-LCD-IRQ",
+	.name = "M32700UT-PLD-LCD-IRQ",
 	.startup = startup_m32700ut_lcdpld_irq,
 	.shutdown = shutdown_m32700ut_lcdpld_irq,
 	.enable = enable_m32700ut_lcdpld_irq,

arch/m32r/platforms/mappi/setup.c

@@ -65,7 +65,7 @@ static void shutdown_mappi_irq(unsigned int irq)
 
 static struct irq_chip mappi_irq_type =
 {
-	.typename = "MAPPI-IRQ",
+	.name = "MAPPI-IRQ",
 	.startup = startup_mappi_irq,
 	.shutdown = shutdown_mappi_irq,
 	.enable = enable_mappi_irq,

arch/m32r/platforms/mappi2/setup.c

@@ -72,7 +72,7 @@ static void shutdown_mappi2_irq(unsigned int irq)
 
 static struct irq_chip mappi2_irq_type =
 {
-	.typename = "MAPPI2-IRQ",
+	.name = "MAPPI2-IRQ",
 	.startup = startup_mappi2_irq,
 	.shutdown = shutdown_mappi2_irq,
 	.enable = enable_mappi2_irq,

arch/m32r/platforms/mappi3/setup.c

@@ -72,7 +72,7 @@ static void shutdown_mappi3_irq(unsigned int irq)
 
 static struct irq_chip mappi3_irq_type =
 {
-	.typename = "MAPPI3-IRQ",
+	.name = "MAPPI3-IRQ",
 	.startup = startup_mappi3_irq,
 	.shutdown = shutdown_mappi3_irq,
 	.enable = enable_mappi3_irq,

arch/m32r/platforms/oaks32r/setup.c

@@ -63,7 +63,7 @@ static void shutdown_oaks32r_irq(unsigned int irq)
 
 static struct irq_chip oaks32r_irq_type =
 {
-	.typename = "OAKS32R-IRQ",
+	.name = "OAKS32R-IRQ",
 	.startup = startup_oaks32r_irq,
 	.shutdown = shutdown_oaks32r_irq,
 	.enable = enable_oaks32r_irq,