Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
  sh: oprofile: Fix up the module build.
  sh: add UIO support for JPU on SH7722.
  serial: sh-sci: Fix up port pinmux for SH7366.
  sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
  sh: mach-sh03: Fix up pata_platform build breakage.
  sh: enable deferred io LCDC on Migo-R
  video: sh_mobile_lcdcfb deferred io support
  video: deferred io with physically contiguous memory
  video: deferred io cleanup
  video: fix deferred io fsync()
  sh: add LCDC interrupt configuration to AP325 and Migo-R
  sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
  sh: split coherent pages
  sh: dma: Kill off ISA DMA wrapper.
  sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
  sh: Kill off the unused SH_ALPHANUMERIC debug option.
  sh: Enable skipping of bss on debug platforms for sh32 also.
  doc: Update sh cpufreq documentation.
  sh: mrshpc_setup_windows() needs to be inline.
  serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
  ...

Documentation/cpu-freq/user-guide.txt

@@ -93,10 +93,8 @@ Several "PowerBook" and "iBook2" notebooks are supported.
 1.5 SuperH
 ----------
 
-The following SuperH processors are supported by cpufreq:
-
-SH-3
-SH-4
+All SuperH processors supporting rate rounding through the clock
+framework are supported by cpufreq.
 
 1.6 Blackfin
 ------------

arch/sh/Kconfig

@@ -13,6 +13,7 @@ config SUPERH
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT if MMU
+	select HAVE_ARCH_TRACEHOOK
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -23,8 +24,10 @@ config SUPERH32
 	def_bool !SUPERH64
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
-	select HAVE_ARCH_TRACEHOOK
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_ARCH_KGDB
 
 config SUPERH64
 	def_bool y if CPU_SH5
@@ -55,8 +58,6 @@ config GENERIC_HARDIRQS
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
-	depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
-				!SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
 	def_bool y
@@ -85,10 +86,17 @@ config GENERIC_LOCKBREAK
 
 config SYS_SUPPORTS_PM
 	bool
+	depends on !SMP
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool n
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool n
 
 config SYS_SUPPORTS_APM_EMULATION
 	bool
-	select SYS_SUPPORTS_PM
+	select ARCH_SUSPEND_POSSIBLE
 
 config SYS_SUPPORTS_SMP
 	bool
@@ -183,6 +191,11 @@ config CPU_SUBTYPE_SH7619
 
 # SH-2A Processor Support
 
+config CPU_SUBTYPE_SH7201
+	bool "Support SH7201 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+
 config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
@@ -456,8 +469,12 @@ config SH_CPU_FREQ
 	depends on CPU_FREQ
 	select CPU_FREQ_TABLE
 	help
-	  This adds the cpufreq driver for SuperH. At present, only
-	  the SH-4 is supported.
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
 
 	  For details, take a look at <file:Documentation/cpu-freq>.
 
@@ -469,9 +486,6 @@ source "arch/sh/drivers/Kconfig"
 
 endmenu
 
-config ISA_DMA_API
-	bool
-
 menu "Kernel features"
 
 source kernel/Kconfig.hz
@@ -688,49 +702,6 @@ config MAPLE
          Dreamcast with a serial line terminal or a remote network
          connection.
 
-config CF_ENABLER
-	bool "Compact Flash Enabler support"
-	depends on SOLUTION_ENGINE || SH_SH03
-	---help---
-	  Compact Flash is a small, removable mass storage device introduced
-	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-	  compile in support for Compact Flash devices directly connected to
-	  a SuperH processor.  A Compact Flash FAQ is available at
-	  <http://www.compactflash.org/faqs/faq.htm>.
-
-	  If your board has "Directly Connected" CompactFlash at area 5 or 6,
-	  you may want to enable this option.  Then, you can use CF as
-	  primary IDE drive (only tested for SanDisk).
-
-	  If in doubt, select 'N'.
-
-choice
-	prompt "Compact Flash Connection Area"
-	depends on CF_ENABLER
-	default CF_AREA6
-
-config CF_AREA5
-	bool "Area5"
-	help
-	  If your board has "Directly Connected" CompactFlash, You should
-	  select the area where your CF is connected to.
-
-	  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-	  - "Area6" if it is connected to Area 6 (0x18000000)
-
-	  "Area6" will work for most boards.
-
-config CF_AREA6
-	bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
-	hex
-	depends on CF_ENABLER
-	default "0xb8000000" if CF_AREA6
-	default "0xb4000000" if CF_AREA5
-
 source "arch/sh/drivers/pci/Kconfig"
 
 source "drivers/pci/Kconfig"
@@ -748,13 +719,11 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL && SYS_SUPPORTS_PM
+depends on EXPERIMENTAL
 
-config ARCH_SUSPEND_POSSIBLE
-	def_bool y
-	depends on !SMP
+source "kernel/power/Kconfig"
 
-source kernel/power/Kconfig
+source "drivers/cpuidle/Kconfig"
 
 endmenu