[media] Add support for PCTV nanoStick T2 290e [2013:024f]

Supports DVB-T/T2/C, USB ID: 2013:024f.
Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2.

Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

drivers/media/video/em28xx/Kconfig

@@ -39,6 +39,7 @@ config VIDEO_EM28XX_DVB
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_S921 if !DVB_FE_CUSTOMISE
 	select DVB_DRXD if !DVB_FE_CUSTOMISE
+	select DVB_CXD2820R if !DVB_FE_CUSTOMISE
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the

drivers/media/video/em28xx/em28xx-cards.c

@@ -289,6 +289,16 @@ static struct em28xx_reg_seq leadership_reset[] = {
 	{	-1,		-1,	-1,	-1},
 };
 
+/* 2013:024f PCTV Systems nanoStick T2 290e
+ * GPIO_6 - demod reset
+ * GPIO_7 - LED
+ */
+static struct em28xx_reg_seq pctv_290e[] = {
+	{EM2874_R80_GPIO,	0x00,	0xff,		80},
+	{EM2874_R80_GPIO,	0x40,	0xff,		80}, /* GPIO_6 = 1 */
+	{EM2874_R80_GPIO,	0xc0,	0xff,		80}, /* GPIO_7 = 1 */
+	{-1,			-1,	-1,		-1},
+};
 
 /*
  *  Board definitions
@@ -1760,6 +1770,17 @@ struct em28xx_board em28xx_boards[] = {
 		.dvb_gpio   = kworld_a340_digital,
 		.tuner_gpio = default_tuner_gpio,
 	},
+	/* 2013:024f PCTV Systems nanoStick T2 290e.
+	 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
+	[EM28174_BOARD_PCTV_290E] = {
+		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
+			EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
+		.xclk          = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.name          = "PCTV Systems nanoStick T2 290e",
+		.tuner_type    = TUNER_ABSENT,
+		.tuner_gpio    = pctv_290e,
+		.has_dvb       = 1,
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1887,6 +1908,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2860_BOARD_GADMEI_UTV330 },
 	{ USB_DEVICE(0x1b80, 0xa340),
 			.driver_info = EM2870_BOARD_KWORLD_A340 },
+	{ USB_DEVICE(0x2013, 0x024f),
+			.driver_info = EM28174_BOARD_PCTV_290E },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);

drivers/media/video/em28xx/em28xx-dvb.c

@@ -39,6 +39,7 @@
 #include "tda18271.h"
 #include "s921.h"
 #include "drxd.h"
+#include "cxd2820r.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <[email protected]>");
@@ -334,6 +335,26 @@ static struct tda10023_config em28xx_tda10023_config = {
 	.invert = 1,
 };
 
+static struct cxd2820r_config em28xx_cxd2820r_config = {
+	.i2c_address = (0xd8 >> 1),
+	.ts_mode = CXD2820R_TS_SERIAL,
+	.if_dvbt_6  = 3300,
+	.if_dvbt_7  = 3500,
+	.if_dvbt_8  = 4000,
+	.if_dvbt2_6 = 3300,
+	.if_dvbt2_7 = 3500,
+	.if_dvbt2_8 = 4000,
+	.if_dvbc    = 5000,
+
+	/* enable LNA for DVB-T2 and DVB-C */
+	.gpio_dvbt2[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L,
+	.gpio_dvbc[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L,
+};
+
+static struct tda18271_config em28xx_cxd2820r_tda18271_config = {
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -640,6 +661,34 @@ static int dvb_init(struct em28xx *dev)
 			dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
 				   &dev->i2c_adap, &kworld_a340_config);
 		break;
+	case EM28174_BOARD_PCTV_290E:
+		/* MFE
+		 * FE 0 = DVB-T/T2 + FE 1 = DVB-C, both sharing same tuner. */
+		/* FE 0 */
+		dvb->fe[0] = dvb_attach(cxd2820r_attach,
+			&em28xx_cxd2820r_config, &dev->i2c_adap, NULL);
+		if (dvb->fe[0]) {
+			struct i2c_adapter *i2c_tuner;
+			i2c_tuner = cxd2820r_get_tuner_i2c_adapter(dvb->fe[0]);
+			/* FE 0 attach tuner */
+			if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
+				i2c_tuner, &em28xx_cxd2820r_tda18271_config)) {
+				dvb_frontend_detach(dvb->fe[0]);
+				result = -EINVAL;
+				goto out_free;
+			}
+			/* FE 1. This dvb_attach() cannot fail. */
+			dvb->fe[1] = dvb_attach(cxd2820r_attach, NULL, NULL,
+				dvb->fe[0]);
+			dvb->fe[1]->id = 1;
+			/* FE 1 attach tuner */
+			if (!dvb_attach(tda18271_attach, dvb->fe[1], 0x60,
+				i2c_tuner, &em28xx_cxd2820r_tda18271_config)) {
+				dvb_frontend_detach(dvb->fe[1]);
+				/* leave FE 0 still active */
+			}
+		}
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");

drivers/media/video/em28xx/em28xx.h

@@ -118,6 +118,7 @@
 #define EM2882_BOARD_DIKOM_DK300		  75
 #define EM2870_BOARD_KWORLD_A340		  76
 #define EM2874_LEADERSHIP_ISDBT			  77
+#define EM28174_BOARD_PCTV_290E                   78
 
 
 /* Limits minimum and default number of buffers */