Merge branch 'hns3-new-features'

Peng Li says:

====================
add some features to hns3 driver

This patchset adds some features to hns3 driver, include the support
for ethtool command -d, -p and support for manager table.

[Patch 1/4] adds support for ethtool command -d, its ops is get_regs.
driver will send command to command queue, and get regs number and
regs value from command queue.
[Patch 2/4] adds manager table initialization for hardware.
[Patch 3/4] adds support for ethtool command -p. For fiber ports, driver
sends command to command queue, and IMP will write SGPIO regs to control
leds.
[Patch 4/4] adds support for net status led for fiber ports. Net status
include  port speed, total rx/tx packets and link status. Driver send
the status to command queue, and IMP will write SGPIO to control leds.

---
Change log:
V1 -> V2:
1, fix comments from Andrew Lunn, remove the patch "net: hns3: add
ethtool -p support for phy device".
====================

Signed-off-by: David S. Miller <[email protected]>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -356,7 +356,8 @@ struct hnae3_ae_ops {
 			    u32 stringset, u8 *data);
 	int (*get_sset_count)(struct hnae3_handle *handle, int stringset);
 
-	void (*get_regs)(struct hnae3_handle *handle, void *data);
+	void (*get_regs)(struct hnae3_handle *handle, u32 *version,
+			 void *data);
 	int (*get_regs_len)(struct hnae3_handle *handle);
 
 	u32 (*get_rss_key_size)(struct hnae3_handle *handle);
@@ -404,6 +405,8 @@ struct hnae3_ae_ops {
 	int (*set_channels)(struct hnae3_handle *handle, u32 new_tqps_num);
 	void (*get_flowctrl_adv)(struct hnae3_handle *handle,
 				 u32 *flowctrl_adv);
+	int (*set_led_id)(struct hnae3_handle *handle,
+			  enum ethtool_phys_id_state status);
 };
 
 struct hnae3_dcb_ops {

drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c

@@ -1063,6 +1063,38 @@ static int hns3_set_coalesce(struct net_device *netdev,
 	return 0;
 }
 
+static int hns3_get_regs_len(struct net_device *netdev)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+
+	if (!h->ae_algo->ops->get_regs_len)
+		return -EOPNOTSUPP;
+
+	return h->ae_algo->ops->get_regs_len(h);
+}
+
+static void hns3_get_regs(struct net_device *netdev,
+			  struct ethtool_regs *cmd, void *data)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+
+	if (!h->ae_algo->ops->get_regs)
+		return;
+
+	h->ae_algo->ops->get_regs(h, &cmd->version, data);
+}
+
+static int hns3_set_phys_id(struct net_device *netdev,
+			    enum ethtool_phys_id_state state)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+
+	if (!h->ae_algo || !h->ae_algo->ops || !h->ae_algo->ops->set_led_id)
+		return -EOPNOTSUPP;
+
+	return h->ae_algo->ops->set_led_id(h, state);
+}
+
 static const struct ethtool_ops hns3vf_ethtool_ops = {
 	.get_drvinfo = hns3_get_drvinfo,
 	.get_ringparam = hns3_get_ringparam,
@@ -1103,6 +1135,9 @@ static const struct ethtool_ops hns3_ethtool_ops = {
 	.set_channels = hns3_set_channels,
 	.get_coalesce = hns3_get_coalesce,
 	.set_coalesce = hns3_set_coalesce,
+	.get_regs_len = hns3_get_regs_len,
+	.get_regs = hns3_get_regs,
+	.set_phys_id = hns3_set_phys_id,
 };
 
 void hns3_ethtool_set_ops(struct net_device *netdev)

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h

@@ -102,6 +102,10 @@ enum hclge_opcode_type {
 	HCLGE_OPC_STATS_64_BIT		= 0x0030,
 	HCLGE_OPC_STATS_32_BIT		= 0x0031,
 	HCLGE_OPC_STATS_MAC		= 0x0032,
+
+	HCLGE_OPC_QUERY_REG_NUM		= 0x0040,
+	HCLGE_OPC_QUERY_32_BIT_REG	= 0x0041,
+	HCLGE_OPC_QUERY_64_BIT_REG	= 0x0042,
 	/* Device management command */
 
 	/* MAC commond */
@@ -111,6 +115,7 @@ enum hclge_opcode_type {
 	HCLGE_OPC_QUERY_LINK_STATUS	= 0x0307,
 	HCLGE_OPC_CONFIG_MAX_FRM_SIZE	= 0x0308,
 	HCLGE_OPC_CONFIG_SPEED_DUP	= 0x0309,
+	HCLGE_OPC_STATS_MAC_TRAFFIC	= 0x0314,
 	/* MACSEC command */
 
 	/* PFC/Pause CMD*/
@@ -223,6 +228,9 @@ enum hclge_opcode_type {
 
 	/* Mailbox cmd */
 	HCLGEVF_OPC_MBX_PF_TO_VF	= 0x2000,
+
+	/* Led command */
+	HCLGE_OPC_LED_STATUS_CFG	= 0xB000,
 };
 
 #define HCLGE_TQP_REG_OFFSET		0x80000
@@ -601,6 +609,28 @@ struct hclge_mac_vlan_mask_entry_cmd {
 	u8 rsv2[14];
 };
 
+#define HCLGE_MAC_MGR_MASK_VLAN_B		BIT(0)
+#define HCLGE_MAC_MGR_MASK_MAC_B		BIT(1)
+#define HCLGE_MAC_MGR_MASK_ETHERTYPE_B		BIT(2)
+#define HCLGE_MAC_ETHERTYPE_LLDP		0x88cc
+
+struct hclge_mac_mgr_tbl_entry_cmd {
+	u8      flags;
+	u8      resp_code;
+	__le16  vlan_tag;
+	__le32  mac_addr_hi32;
+	__le16  mac_addr_lo16;
+	__le16  rsv1;
+	__le16  ethter_type;
+	__le16  egress_port;
+	__le16  egress_queue;
+	u8      sw_port_id_aware;
+	u8      rsv2;
+	u8      i_port_bitmap;
+	u8      i_port_direction;
+	u8      rsv3[2];
+};
+
 #define HCLGE_CFG_MTA_MAC_SEL_S		0x0
 #define HCLGE_CFG_MTA_MAC_SEL_M		GENMASK(1, 0)
 #define HCLGE_CFG_MTA_MAC_EN_B		0x7
@@ -781,6 +811,23 @@ struct hclge_reset_cmd {
 #define HCLGE_NIC_CMQ_DESC_NUM		1024
 #define HCLGE_NIC_CMQ_DESC_NUM_S	3
 
+#define HCLGE_LED_PORT_SPEED_STATE_S	0
+#define HCLGE_LED_PORT_SPEED_STATE_M	GENMASK(5, 0)
+#define HCLGE_LED_ACTIVITY_STATE_S	0
+#define HCLGE_LED_ACTIVITY_STATE_M	GENMASK(1, 0)
+#define HCLGE_LED_LINK_STATE_S		0
+#define HCLGE_LED_LINK_STATE_M		GENMASK(1, 0)
+#define HCLGE_LED_LOCATE_STATE_S	0
+#define HCLGE_LED_LOCATE_STATE_M	GENMASK(1, 0)
+
+struct hclge_set_led_state_cmd {
+	u8 port_speed_led_config;
+	u8 link_led_config;
+	u8 activity_led_config;
+	u8 locate_led_config;
+	u8 rsv[20];
+};
+
 int hclge_cmd_init(struct hclge_dev *hdev);
 static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
 {