Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jejb/scsi-misc-2.6

SCSI updates for post 3.2 merge window

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (67 commits)
  [SCSI] lpfc 8.3.28: Update driver version to 8.3.28
  [SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adapters
  [SCSI] lpfc 8.3.28: Critical Miscellaneous fixes
  [SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes
  [SCSI] lpfc 8.3.28: Add support for ABTS failure handling
  [SCSI] lpfc 8.3.28: SLI fixes and added SLI4 support
  [SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfaces
  [SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from _scsih_probe
  [SCSI] mac_scsi: Remove obsolete IRQ_FLG_* users
  [SCSI] qla4xxx: Update driver version to 5.02.00-k10
  [SCSI] qla4xxx: check for FW alive before calling chip_reset
  [SCSI] qla4xxx: Fix qla4xxx_dump_buffer to dump buffer correctly
  [SCSI] qla4xxx: Fix the IDC locking mechanism
  [SCSI] qla4xxx: Wait for disable_acb before doing set_acb
  [SCSI] qla4xxx: Don't recover adapter if device state is FAILED
  [SCSI] qla4xxx: fix call trace on rmmod with ql4xdontresethba=1
  [SCSI] qla4xxx: Fix CPU lockups when ql4xdontresethba set
  [SCSI] qla4xxx: Perform context resets in case of context failures.
  [SCSI] iscsi class: export pid of process that created
  [SCSI] mpt2sas: Remove unused duplicate diag_buffer_enable param
  ...

drivers/message/fusion/lsi/mpi_cnfg.h

@@ -583,6 +583,7 @@ typedef struct _MSG_CONFIG_REPLY
 #define MPI_MANUFACTPAGE_DEVID_SAS1066E             (0x005A)
 #define MPI_MANUFACTPAGE_DEVID_SAS1068              (0x0054)
 #define MPI_MANUFACTPAGE_DEVID_SAS1068E             (0x0058)
+#define MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP      (0x0059)
 #define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0062)
 
 

drivers/message/fusion/mptbase.c

@@ -115,7 +115,8 @@ module_param(mpt_fwfault_debug, int, 0600);
 MODULE_PARM_DESC(mpt_fwfault_debug,
 		 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
 
-static char	MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS][50];
+static char	MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
+				[MPT_MAX_CALLBACKNAME_LEN+1];
 
 #ifdef MFCNT
 static int mfcounter = 0;
@@ -717,8 +718,8 @@ mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
 			MptDriverClass[cb_idx] = dclass;
 			MptEvHandlers[cb_idx] = NULL;
 			last_drv_idx = cb_idx;
-			memcpy(MptCallbacksName[cb_idx], func_name,
-			    strlen(func_name) > 50 ? 50 : strlen(func_name));
+			strlcpy(MptCallbacksName[cb_idx], func_name,
+				MPT_MAX_CALLBACKNAME_LEN+1);
 			break;
 		}
 	}

drivers/message/fusion/mptbase.h

@@ -89,6 +89,7 @@
  */
 #define MPT_MAX_ADAPTERS		18
 #define MPT_MAX_PROTOCOL_DRIVERS	16
+#define MPT_MAX_CALLBACKNAME_LEN	49
 #define MPT_MAX_BUS			1	/* Do not change */
 #define MPT_MAX_FC_DEVICES		255
 #define MPT_MAX_SCSI_DEVICES		16

drivers/message/fusion/mptsas.c

@@ -5376,6 +5376,8 @@ static struct pci_device_id mptsas_pci_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID },
 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078,
 		PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP,
+		PCI_ANY_ID, PCI_ANY_ID },
 	{0}	/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(pci, mptsas_pci_table);

drivers/scsi/be2iscsi/be_main.c

@@ -1105,7 +1105,6 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn,
 	struct be_status_bhs *sts_bhs =
 				(struct be_status_bhs *)io_task->cmd_bhs;
 	struct iscsi_conn *conn = beiscsi_conn->conn;
-	unsigned int sense_len;
 	unsigned char *sense;
 	u32 resid = 0, exp_cmdsn, max_cmdsn;
 	u8 rsp, status, flags;
@@ -1153,9 +1152,11 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn,
 	}
 
 	if (status == SAM_STAT_CHECK_CONDITION) {
+		u16 sense_len;
 		unsigned short *slen = (unsigned short *)sts_bhs->sense_info;
+
 		sense = sts_bhs->sense_info + sizeof(unsigned short);
-		sense_len =  cpu_to_be16(*slen);
+		sense_len = be16_to_cpu(*slen);
 		memcpy(task->sc->sense_buffer, sense,
 		       min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE));
 	}

drivers/scsi/bfa/bfa_defs.h

@@ -902,7 +902,7 @@ struct sfp_mem_s {
 union sfp_xcvr_e10g_code_u {
 	u8		b;
 	struct {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 		u8	e10g_unall:1;   /* 10G Ethernet compliance */
 		u8	e10g_lrm:1;
 		u8	e10g_lr:1;
@@ -982,7 +982,7 @@ union sfp_xcvr_fc2_code_u {
 union sfp_xcvr_fc3_code_u {
 	u8		b;
 	struct {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 		u8	rsv4:1;
 		u8	mb800:1;    /* 800 Mbytes/sec */
 		u8	mb1600:1;   /* 1600 Mbytes/sec */