Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/jlayton/linux

Pull writeback error handling updates from Jeff Layton:
 "This pile continues the work from last cycle on better tracking
  writeback errors. In v4.13 we added some basic errseq_t infrastructure
  and converted a few filesystems to use it.

  This set continues refining that infrastructure, adds documentation,
  and converts most of the other filesystems to use it. The main
  exception at this point is the NFS client"

* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  ecryptfs: convert to file_write_and_wait in ->fsync
  mm: remove optimizations based on i_size in mapping writeback waits
  fs: convert a pile of fsync routines to errseq_t based reporting
  gfs2: convert to errseq_t based writeback error reporting for fsync
  fs: convert sync_file_range to use errseq_t based error-tracking
  mm: add file_fdatawait_range and file_write_and_wait
  fuse: convert to errseq_t based error tracking for fsync
  mm: consolidate dax / non-dax checks for writeback
  Documentation: add some docs for errseq_t
  errseq: rename __errseq_set to errseq_set

Documentation/errseq.rst

@@ -0,0 +1,149 @@
+The errseq_t datatype
+=====================
+An errseq_t is a way of recording errors in one place, and allowing any
+number of "subscribers" to tell whether it has changed since a previous
+point where it was sampled.
+
+The initial use case for this is tracking errors for file
+synchronization syscalls (fsync, fdatasync, msync and sync_file_range),
+but it may be usable in other situations.
+
+It's implemented as an unsigned 32-bit value.  The low order bits are
+designated to hold an error code (between 1 and MAX_ERRNO).  The upper bits
+are used as a counter.  This is done with atomics instead of locking so that
+these functions can be called from any context.
+
+Note that there is a risk of collisions if new errors are being recorded
+frequently, since we have so few bits to use as a counter.
+
+To mitigate this, the bit between the error value and counter is used as
+a flag to tell whether the value has been sampled since a new value was
+recorded.  That allows us to avoid bumping the counter if no one has
+sampled it since the last time an error was recorded.
+
+Thus we end up with a value that looks something like this::
+
+    bit:  31..13        12        11..0
+    +-----------------+----+----------------+
+    |     counter     | SF |      errno     |
+    +-----------------+----+----------------+
+
+The general idea is for "watchers" to sample an errseq_t value and keep
+it as a running cursor.  That value can later be used to tell whether
+any new errors have occurred since that sampling was done, and atomically
+record the state at the time that it was checked.  This allows us to
+record errors in one place, and then have a number of "watchers" that
+can tell whether the value has changed since they last checked it.
+
+A new errseq_t should always be zeroed out.  An errseq_t value of all zeroes
+is the special (but common) case where there has never been an error. An all
+zero value thus serves as the "epoch" if one wishes to know whether there
+has ever been an error set since it was first initialized.
+
+API usage
+=========
+Let me tell you a story about a worker drone.  Now, he's a good worker
+overall, but the company is a little...management heavy.  He has to
+report to 77 supervisors today, and tomorrow the "big boss" is coming in
+from out of town and he's sure to test the poor fellow too.
+
+They're all handing him work to do -- so much he can't keep track of who
+handed him what, but that's not really a big problem.  The supervisors
+just want to know when he's finished all of the work they've handed him so
+far and whether he made any mistakes since they last asked.
+
+He might have made the mistake on work they didn't actually hand him,
+but he can't keep track of things at that level of detail, all he can
+remember is the most recent mistake that he made.
+
+Here's our worker_drone representation::
+
+        struct worker_drone {
+                errseq_t        wd_err; /* for recording errors */
+        };
+
+Every day, the worker_drone starts out with a blank slate::
+
+        struct worker_drone wd;
+
+        wd.wd_err = (errseq_t)0;
+
+The supervisors come in and get an initial read for the day.  They
+don't care about anything that happened before their watch begins::
+
+        struct supervisor {
+                errseq_t        s_wd_err; /* private "cursor" for wd_err */
+                spinlock_t      s_wd_err_lock; /* protects s_wd_err */
+        }
+
+        struct supervisor       su;
+
+        su.s_wd_err = errseq_sample(&wd.wd_err);
+        spin_lock_init(&su.s_wd_err_lock);
+
+Now they start handing him tasks to do.  Every few minutes they ask him to
+finish up all of the work they've handed him so far.  Then they ask him
+whether he made any mistakes on any of it::
+
+        spin_lock(&su.su_wd_err_lock);
+        err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
+        spin_unlock(&su.su_wd_err_lock);
+
+Up to this point, that just keeps returning 0.
+
+Now, the owners of this company are quite miserly and have given him
+substandard equipment with which to do his job. Occasionally it
+glitches and he makes a mistake.  He sighs a heavy sigh, and marks it
+down::
+
+        errseq_set(&wd.wd_err, -EIO);
+
+...and then gets back to work.  The supervisors eventually poll again
+and they each get the error when they next check.  Subsequent calls will
+return 0, until another error is recorded, at which point it's reported
+to each of them once.
+
+Note that the supervisors can't tell how many mistakes he made, only
+whether one was made since they last checked, and the latest value
+recorded.
+
+Occasionally the big boss comes in for a spot check and asks the worker
+to do a one-off job for him. He's not really watching the worker
+full-time like the supervisors, but he does need to know whether a
+mistake occurred while his job was processing.
+
+He can just sample the current errseq_t in the worker, and then use that
+to tell whether an error has occurred later::
+
+        errseq_t since = errseq_sample(&wd.wd_err);
+        /* submit some work and wait for it to complete */
+        err = errseq_check(&wd.wd_err, since);
+
+Since he's just going to discard "since" after that point, he doesn't
+need to advance it here. He also doesn't need any locking since it's
+not usable by anyone else.
+
+Serializing errseq_t cursor updates
+===================================
+Note that the errseq_t API does not protect the errseq_t cursor during a
+check_and_advance_operation. Only the canonical error code is handled
+atomically.  In a situation where more than one task might be using the
+same errseq_t cursor at the same time, it's important to serialize
+updates to that cursor.
+
+If that's not done, then it's possible for the cursor to go backward
+in which case the same error could be reported more than once.
+
+Because of this, it's often advantageous to first do an errseq_check to
+see if anything has changed, and only later do an
+errseq_check_and_advance after taking the lock. e.g.::
+
+        if (errseq_check(&wd.wd_err, READ_ONCE(su.s_wd_err)) {
+                /* su.s_wd_err is protected by s_wd_err_lock */
+                spin_lock(&su.s_wd_err_lock);
+                err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
+                spin_unlock(&su.s_wd_err_lock);
+        }
+
+That avoids the spinlock in the common case where nothing has changed
+since the last time it was checked.

arch/powerpc/platforms/cell/spufs/file.c

@@ -1749,7 +1749,7 @@ static int spufs_mfc_flush(struct file *file, fl_owner_t id)
 static int spufs_mfc_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 {
 	struct inode *inode = file_inode(file);
-	int err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	int err = file_write_and_wait_range(file, start, end);
 	if (!err) {
 		inode_lock(inode);
 		err = spufs_mfc_flush(file, NULL);

drivers/staging/lustre/lustre/llite/file.c

@@ -2364,7 +2364,7 @@ int ll_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	       PFID(ll_inode2fid(inode)), inode);
 	ll_stats_ops_tally(ll_i2sbi(inode), LPROC_LL_FSYNC, 1);
 
-	rc = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	rc = file_write_and_wait_range(file, start, end);
 	inode_lock(inode);
 
 	/* catch async errors that were recorded back when async writeback

drivers/video/fbdev/core/fb_defio.c

@@ -69,7 +69,7 @@ int fb_deferred_io_fsync(struct file *file, loff_t start, loff_t end, int datasy
 {
 	struct fb_info *info = file->private_data;
 	struct inode *inode = file_inode(file);
-	int err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	int err = file_write_and_wait_range(file, start, end);
 	if (err)
 		return err;
 

fs/9p/vfs_file.c

@@ -445,7 +445,7 @@ static int v9fs_file_fsync(struct file *filp, loff_t start, loff_t end,
 	struct p9_wstat wstat;
 	int retval;
 
-	retval = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	retval = file_write_and_wait_range(filp, start, end);
 	if (retval)
 		return retval;
 
@@ -468,7 +468,7 @@ int v9fs_file_fsync_dotl(struct file *filp, loff_t start, loff_t end,
 	struct inode *inode = filp->f_mapping->host;
 	int retval;
 
-	retval = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	retval = file_write_and_wait_range(filp, start, end);
 	if (retval)
 		return retval;
 

fs/affs/file.c

@@ -954,7 +954,7 @@ int affs_file_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
 	struct inode *inode = filp->f_mapping->host;
 	int ret, err;
 
-	err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	err = file_write_and_wait_range(filp, start, end);
 	if (err)
 		return err;
 

fs/afs/write.c

@@ -714,7 +714,7 @@ int afs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	       vnode->fid.vid, vnode->fid.vnode, file,
 	       datasync);
 
-	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	ret = file_write_and_wait_range(file, start, end);
 	if (ret)
 		return ret;
 	inode_lock(inode);

fs/cifs/file.c

@@ -2329,7 +2329,7 @@ int cifs_strict_fsync(struct file *file, loff_t start, loff_t end,
 	struct inode *inode = file_inode(file);
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 
-	rc = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	rc = file_write_and_wait_range(file, start, end);
 	if (rc)
 		return rc;
 	inode_lock(inode);
@@ -2371,7 +2371,7 @@ int cifs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	struct cifs_sb_info *cifs_sb = CIFS_FILE_SB(file);
 	struct inode *inode = file->f_mapping->host;
 
-	rc = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	rc = file_write_and_wait_range(file, start, end);
 	if (rc)
 		return rc;
 	inode_lock(inode);

fs/ecryptfs/file.c

@@ -328,7 +328,7 @@ ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 {
 	int rc;
 
-	rc = filemap_write_and_wait(file->f_mapping);
+	rc = file_write_and_wait(file);
 	if (rc)
 		return rc;
 

fs/exofs/file.c

@@ -48,7 +48,7 @@ static int exofs_file_fsync(struct file *filp, loff_t start, loff_t end,
 	struct inode *inode = filp->f_mapping->host;
 	int ret;
 
-	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	ret = file_write_and_wait_range(filp, start, end);
 	if (ret)
 		return ret;
 

fs/f2fs/file.c

@@ -206,7 +206,7 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
 	/* if fdatasync is triggered, let's do in-place-update */
 	if (datasync || get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks)
 		set_inode_flag(inode, FI_NEED_IPU);
-	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	ret = file_write_and_wait_range(file, start, end);
 	clear_inode_flag(inode, FI_NEED_IPU);
 
 	if (ret) {

fs/fuse/file.c

@@ -457,18 +457,18 @@ int fuse_fsync_common(struct file *file, loff_t start, loff_t end,
 	 * wait for all outstanding writes, before sending the FSYNC
 	 * request.
 	 */
-	err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	err = file_write_and_wait_range(file, start, end);
 	if (err)
 		goto out;
 
 	fuse_sync_writes(inode);
 
 	/*
 	 * Due to implementation of fuse writeback
-	 * filemap_write_and_wait_range() does not catch errors.
+	 * file_write_and_wait_range() does not catch errors.
 	 * We have to do this directly after fuse_sync_writes()
 	 */
-	err = filemap_check_errors(file->f_mapping);
+	err = file_check_and_advance_wb_err(file);
 	if (err)
 		goto out;
 

fs/gfs2/file.c

@@ -668,12 +668,14 @@ static int gfs2_fsync(struct file *file, loff_t start, loff_t end,
 		if (ret)
 			return ret;
 		if (gfs2_is_jdata(ip))
-			filemap_write_and_wait(mapping);
+			ret = file_write_and_wait(file);
+		if (ret)
+			return ret;
 		gfs2_ail_flush(ip->i_gl, 1);
 	}
 
 	if (mapping->nrpages)
-		ret = filemap_fdatawait_range(mapping, start, end);
+		ret = file_fdatawait_range(file, start, end);
 
 	return ret ? ret : ret1;
 }

fs/hfs/inode.c

@@ -656,7 +656,7 @@ static int hfs_file_fsync(struct file *filp, loff_t start, loff_t end,
 	struct super_block * sb;
 	int ret, err;
 
-	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	ret = file_write_and_wait_range(filp, start, end);
 	if (ret)
 		return ret;
 	inode_lock(inode);

fs/hfsplus/inode.c

@@ -283,7 +283,7 @@ int hfsplus_file_fsync(struct file *file, loff_t start, loff_t end,
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
 	int error = 0, error2;
 
-	error = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	error = file_write_and_wait_range(file, start, end);
 	if (error)
 		return error;
 	inode_lock(inode);

fs/hostfs/hostfs_kern.c

@@ -374,7 +374,7 @@ static int hostfs_fsync(struct file *file, loff_t start, loff_t end,
 	struct inode *inode = file->f_mapping->host;
 	int ret;
 
-	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	ret = file_write_and_wait_range(file, start, end);
 	if (ret)
 		return ret;
 

fs/hpfs/file.c

@@ -24,7 +24,7 @@ int hpfs_file_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	struct inode *inode = file->f_mapping->host;
 	int ret;
 
-	ret = filemap_write_and_wait_range(file->f_mapping, start, end);
+	ret = file_write_and_wait_range(file, start, end);
 	if (ret)
 		return ret;
 	return sync_blockdev(inode->i_sb->s_bdev);

fs/jffs2/file.c

@@ -35,7 +35,7 @@ int jffs2_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
 	int ret;
 
-	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	ret = file_write_and_wait_range(filp, start, end);
 	if (ret)
 		return ret;
 

fs/jfs/file.c

@@ -34,7 +34,7 @@ int jfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	struct inode *inode = file->f_mapping->host;
 	int rc = 0;
 
-	rc = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	rc = file_write_and_wait_range(file, start, end);
 	if (rc)
 		return rc;
 

fs/ncpfs/file.c

@@ -23,7 +23,7 @@
 
 static int ncp_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 {
-	return filemap_write_and_wait_range(file->f_mapping, start, end);
+	return file_write_and_wait_range(file, start, end);
 }
 
 /*

fs/ntfs/dir.c

@@ -1506,7 +1506,7 @@ static int ntfs_dir_fsync(struct file *filp, loff_t start, loff_t end,
 
 	ntfs_debug("Entering for inode 0x%lx.", vi->i_ino);
 
-	err = filemap_write_and_wait_range(vi->i_mapping, start, end);
+	err = file_write_and_wait_range(filp, start, end);
 	if (err)
 		return err;
 	inode_lock(vi);

fs/ntfs/file.c

@@ -1989,7 +1989,7 @@ static int ntfs_file_fsync(struct file *filp, loff_t start, loff_t end,
 
 	ntfs_debug("Entering for inode 0x%lx.", vi->i_ino);
 
-	err = filemap_write_and_wait_range(vi->i_mapping, start, end);
+	err = file_write_and_wait_range(filp, start, end);
 	if (err)
 		return err;
 	inode_lock(vi);

fs/ocfs2/file.c

@@ -196,7 +196,7 @@ static int ocfs2_sync_file(struct file *file, loff_t start, loff_t end,
 	if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
 		return -EROFS;
 
-	err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	err = file_write_and_wait_range(file, start, end);
 	if (err)
 		return err;
 

fs/reiserfs/dir.c

@@ -34,7 +34,7 @@ static int reiserfs_dir_fsync(struct file *filp, loff_t start, loff_t end,
 	struct inode *inode = filp->f_mapping->host;
 	int err;
 
-	err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	err = file_write_and_wait_range(filp, start, end);
 	if (err)
 		return err;