Merge tag 'regmap-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Several small updates and API enhancements:

   - provide transparent unrolling of bulk writes into individual writes
     so they can be used with devices without raw formatting.

   - fix compatibility between I2C controllers supporting block commands
     and devices with more than 8 bit wide registers.

   - add some helpers for iopoll-like functionality and workarounds for
     weird interrupt controllers"

* tag 'regmap-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add iopoll-like polling macro
  regmap: Support bulk writes for devices without raw formatting
  regmap-i2c: Use i2c block command only if register value width is 8 bit
  regmap: irq: Add support to call client specific pre/post interrupt service
  regmap: Add file patterns for regmap device tree bindings

MAINTAINERS

@@ -9691,6 +9691,7 @@ M:	Mark Brown <[email protected]>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
 S:	Supported
+F:	Documentation/devicetree/bindings/regmap/
 F:	drivers/base/regmap/
 F:	include/linux/regmap.h
 

drivers/base/regmap/regmap-i2c.c

@@ -259,7 +259,7 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 {
 	if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C))
 		return &regmap_i2c;
-	else if (config->reg_bits == 8 &&
+	else if (config->val_bits == 8 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_I2C_BLOCK))
 		return &regmap_i2c_smbus_i2c_block;

drivers/base/regmap/regmap-irq.c

@@ -268,13 +268,16 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 	bool handled = false;
 	u32 reg;
 
+	if (chip->handle_pre_irq)
+		chip->handle_pre_irq(chip->irq_drv_data);
+
 	if (chip->runtime_pm) {
 		ret = pm_runtime_get_sync(map->dev);
 		if (ret < 0) {
 			dev_err(map->dev, "IRQ thread failed to resume: %d\n",
 				ret);
 			pm_runtime_put(map->dev);
-			return IRQ_NONE;
+			goto exit;
 		}
 	}
 
@@ -296,7 +299,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 		if (ret != 0) {
 			dev_err(map->dev, "Failed to read IRQ status: %d\n",
 				ret);
-			return IRQ_NONE;
+			goto exit;
 		}
 
 		for (i = 0; i < data->chip->num_regs; i++) {
@@ -312,7 +315,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 				break;
 			default:
 				BUG();
-				return IRQ_NONE;
+				goto exit;
 			}
 		}
 
@@ -329,7 +332,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 					ret);
 				if (chip->runtime_pm)
 					pm_runtime_put(map->dev);
-				return IRQ_NONE;
+				goto exit;
 			}
 		}
 	}
@@ -365,6 +368,10 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 	if (chip->runtime_pm)
 		pm_runtime_put(map->dev);
 
+exit:
+	if (chip->handle_post_irq)
+		chip->handle_post_irq(chip->irq_drv_data);
+
 	if (handled)
 		return IRQ_HANDLED;
 	else

drivers/base/regmap/regmap.c

@@ -1777,8 +1777,6 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 	size_t val_bytes = map->format.val_bytes;
 	size_t total_size = val_bytes * val_count;
 
-	if (map->bus && !map->format.parse_inplace)
-		return -EINVAL;
 	if (!IS_ALIGNED(reg, map->reg_stride))
 		return -EINVAL;
 
@@ -1789,7 +1787,8 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 	 *
 	 * The first if block is used for memory mapped io. It does not allow
 	 * val_bytes of 3 for example.
-	 * The second one is used for busses which do not have this limitation
+	 * The second one is for busses that do not provide raw I/O.
+	 * The third one is used for busses which do not have these limitations
 	 * and can write arbitrary value lengths.
 	 */
 	if (!map->bus) {
@@ -1825,6 +1824,32 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 		}
 out:
 		map->unlock(map->lock_arg);
+	} else if (map->bus && !map->format.parse_inplace) {
+		const u8 *u8 = val;
+		const u16 *u16 = val;
+		const u32 *u32 = val;
+		unsigned int ival;
+
+		for (i = 0; i < val_count; i++) {
+			switch (map->format.val_bytes) {
+			case 4:
+				ival = u32[i];
+				break;
+			case 2:
+				ival = u16[i];
+				break;
+			case 1:
+				ival = u8[i];
+				break;
+			default:
+				return -EINVAL;
+			}
+
+			ret = regmap_write(map, reg + (i * map->reg_stride),
+					   ival);
+			if (ret)
+				return ret;
+		}
 	} else if (map->use_single_write ||
 		   (map->max_raw_write && map->max_raw_write < total_size)) {
 		int chunk_stride = map->reg_stride;

include/linux/regmap.h

@@ -95,6 +95,45 @@ struct reg_sequence {
 #define	regmap_fields_force_update_bits(field, id, mask, val) \
 	regmap_fields_update_bits_base(field, id, mask, val, NULL, false, true)
 
+/**
+ * regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs
+ * @map: Regmap to read from
+ * @addr: Address to poll
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ *            tight-loops).  Should be less than ~20ms since usleep_range
+ *            is used (see Documentation/timers/timers-howto.txt).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val. Must not be called
+ * from atomic context if sleep_us or timeout_us are used.
+ *
+ * This is modelled after the readx_poll_timeout macros in linux/iopoll.h.
+ */
+#define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \
+({ \
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+	int ret; \
+	might_sleep_if(sleep_us); \
+	for (;;) { \
+		ret = regmap_read((map), (addr), &(val)); \
+		if (ret) \
+			break; \
+		if (cond) \
+			break; \
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
+			ret = regmap_read((map), (addr), &(val)); \
+			break; \
+		} \
+		if (sleep_us) \
+			usleep_range((sleep_us >> 2) + 1, sleep_us); \
+	} \
+	ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
 #ifdef CONFIG_REGMAP
 
 enum regmap_endian {
@@ -851,6 +890,12 @@ struct regmap_irq {
  * @num_type_reg:    Number of type registers.
  * @type_reg_stride: Stride to use for chips where type registers are not
  *			contiguous.
+ * @handle_pre_irq:  Driver specific callback to handle interrupt from device
+ *		     before regmap_irq_handler process the interrupts.
+ * @handle_post_irq: Driver specific callback to handle interrupt from device
+ *		     after handling the interrupts in regmap_irq_handler().
+ * @irq_drv_data:    Driver specific IRQ data which is passed as parameter when
+ *		     driver specific pre/post interrupt handler is called.
  */
 struct regmap_irq_chip {
 	const char *name;
@@ -877,6 +922,10 @@ struct regmap_irq_chip {
 
 	int num_type_reg;
 	unsigned int type_reg_stride;
+
+	int (*handle_pre_irq)(void *irq_drv_data);
+	int (*handle_post_irq)(void *irq_drv_data);
+	void *irq_drv_data;
 };
 
 struct regmap_irq_chip_data;