Merge tag 'mac80211-for-davem-2015-12-02' of git://git.kernel.org/pub…

…/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A small set of fixes for 4.4:
 * fix scanning in mac80211 to not actively scan radar
   channels (from Antonio)
 * fix uninitialized variable in remain-on-channel that
   could lead to treating frame TX as remain-on-channel
   and not sending the frame at all
 * remove NL80211_FEATURE_FULL_AP_CLIENT_STATE again, it
   was broken and needs more work, we'll enable it later
 * fix call_rcu() induced use-after-reset/free in mesh
   (that was suddenly causing issues in certain tests)
 * always request block-ack window size 64 as we found
   some APs will otherwise crash (really ...)
 * fix P2P-Device teardown sequence to avoid restarting
   with uninitialized data
====================

Signed-off-by: David S. Miller <[email protected]>

include/net/mac80211.h

@@ -2003,8 +2003,10 @@ enum ieee80211_hw_flags {
  *	it shouldn't be set.
  *
  * @max_tx_aggregation_subframes: maximum number of subframes in an
- *	aggregate an HT driver will transmit, used by the peer as a
- *	hint to size its reorder buffer.
+ *	aggregate an HT driver will transmit. Though ADDBA will advertise
+ *	a constant value of 64 as some older APs can crash if the window
+ *	size is smaller (an example is LinkSys WRT120N with FW v1.0.07
+ *	build 002 Jun 18 2012).
  *
  * @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX
  *	(if %IEEE80211_HW_QUEUE_CONTROL is set)

net/mac80211/agg-tx.c

@@ -500,7 +500,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 	/* send AddBA request */
 	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
 				     tid_tx->dialog_token, start_seq_num,
-				     local->hw.max_tx_aggregation_subframes,
+				     IEEE80211_MAX_AMPDU_BUF,
 				     tid_tx->timeout);
 }
 
@@ -926,6 +926,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 	amsdu = capab & IEEE80211_ADDBA_PARAM_AMSDU_MASK;
 	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
+	buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
 
 	mutex_lock(&sta->ampdu_mlme.mtx);
 

net/mac80211/cfg.c

@@ -3454,8 +3454,12 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 			goto out_unlock;
 		}
 	} else {
-		/* for cookie below */
-		ack_skb = skb;
+		/* Assign a dummy non-zero cookie, it's not sent to
+		 * userspace in this case but we rely on its value
+		 * internally in the need_offchan case to distinguish
+		 * mgmt-tx from remain-on-channel.
+		 */
+		*cookie = 0xffffffff;
 	}
 
 	if (!need_offchan) {

net/mac80211/iface.c

@@ -76,7 +76,8 @@ bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata)
 void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata,
 			      bool update_bss)
 {
-	if (__ieee80211_recalc_txpower(sdata) || update_bss)
+	if (__ieee80211_recalc_txpower(sdata) ||
+	    (update_bss && ieee80211_sdata_running(sdata)))
 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER);
 }
 
@@ -1861,6 +1862,7 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
 		unregister_netdevice(sdata->dev);
 	} else {
 		cfg80211_unregister_wdev(&sdata->wdev);
+		ieee80211_teardown_sdata(sdata);
 		kfree(sdata);
 	}
 }
@@ -1870,7 +1872,6 @@ void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata)
 	if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state)))
 		return;
 	ieee80211_do_stop(sdata, true);
-	ieee80211_teardown_sdata(sdata);
 }
 
 void ieee80211_remove_interfaces(struct ieee80211_local *local)

net/mac80211/main.c

@@ -541,8 +541,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
 			   NL80211_FEATURE_HT_IBSS |
 			   NL80211_FEATURE_VIF_TXPOWER |
 			   NL80211_FEATURE_MAC_ON_CREATE |
-			   NL80211_FEATURE_USERSPACE_MPM |
-			   NL80211_FEATURE_FULL_AP_CLIENT_STATE;
+			   NL80211_FEATURE_USERSPACE_MPM;
 
 	if (!ops->hw_scan)
 		wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |

net/mac80211/mesh_pathtbl.c

@@ -779,26 +779,26 @@ void mesh_plink_broken(struct sta_info *sta)
 static void mesh_path_node_reclaim(struct rcu_head *rp)
 {
 	struct mpath_node *node = container_of(rp, struct mpath_node, rcu);
-	struct ieee80211_sub_if_data *sdata = node->mpath->sdata;
 
 	del_timer_sync(&node->mpath->timer);
-	atomic_dec(&sdata->u.mesh.mpaths);
 	kfree(node->mpath);
 	kfree(node);
 }
 
 /* needs to be called with the corresponding hashwlock taken */
 static void __mesh_path_del(struct mesh_table *tbl, struct mpath_node *node)
 {
-	struct mesh_path *mpath;
-	mpath = node->mpath;
+	struct mesh_path *mpath = node->mpath;
+	struct ieee80211_sub_if_data *sdata = node->mpath->sdata;
+
 	spin_lock(&mpath->state_lock);
 	mpath->flags |= MESH_PATH_RESOLVING;
 	if (mpath->is_gate)
 		mesh_gate_del(tbl, mpath);
 	hlist_del_rcu(&node->list);
 	call_rcu(&node->rcu, mesh_path_node_reclaim);
 	spin_unlock(&mpath->state_lock);
+	atomic_dec(&sdata->u.mesh.mpaths);
 	atomic_dec(&tbl->entries);
 }
 

net/mac80211/scan.c

@@ -597,8 +597,8 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 		/* We need to ensure power level is at max for scanning. */
 		ieee80211_hw_config(local, 0);
 
-		if ((req->channels[0]->flags &
-		     IEEE80211_CHAN_NO_IR) ||
+		if ((req->channels[0]->flags & (IEEE80211_CHAN_NO_IR |
+						IEEE80211_CHAN_RADAR)) ||
 		    !req->n_ssids) {
 			next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
 		} else {
@@ -645,7 +645,7 @@ ieee80211_scan_get_channel_time(struct ieee80211_channel *chan)
 	 * TODO: channel switching also consumes quite some time,
 	 * add that delay as well to get a better estimation
 	 */
-	if (chan->flags & IEEE80211_CHAN_NO_IR)
+	if (chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR))
 		return IEEE80211_PASSIVE_CHANNEL_TIME;
 	return IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME;
 }
@@ -777,7 +777,8 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 	 *
 	 * In any case, it is not necessary for a passive scan.
 	 */
-	if (chan->flags & IEEE80211_CHAN_NO_IR || !scan_req->n_ssids) {
+	if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) ||
+	    !scan_req->n_ssids) {
 		*next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
 		local->next_scan_state = SCAN_DECISION;
 		return;