Merge ath-next from ath.git

Major changes in ath10k:

* add spectral scan support for 10.4 firmware
* add qca6164 support
* implement mesh support using firmware raw mode

drivers/net/wireless/ath/ath10k/core.c

@@ -34,16 +34,19 @@ unsigned int ath10k_debug_mask;
 static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool skip_otp;
+static bool rawmode;
 
 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
 module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
 module_param(uart_print, bool, 0644);
 module_param(skip_otp, bool, 0644);
+module_param(rawmode, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
 MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
+MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
@@ -54,6 +57,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.has_shifted_cc_wraparound = true,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -70,6 +74,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 6,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA6174_HW_2_1_FW_DIR,
 			.fw = QCA6174_HW_2_1_FW_FILE,
@@ -86,6 +91,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 6,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA6174_HW_3_0_FW_DIR,
 			.fw = QCA6174_HW_3_0_FW_FILE,
@@ -102,6 +108,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 6,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			/* uses same binaries as hw3.0 */
 			.dir = QCA6174_HW_3_0_FW_DIR,
@@ -120,6 +127,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.channel_counters_freq_hz = 150000,
+		.max_probe_resp_desc_thres = 24,
 		.fw = {
 			.dir = QCA99X0_HW_2_0_FW_DIR,
 			.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -142,12 +150,17 @@ static const char *const ath10k_core_fw_feature_str[] = {
 	[ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp",
 	[ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
 	[ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
+	[ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
 };
 
 static unsigned int ath10k_core_get_fw_feature_str(char *buf,
 						   size_t buf_len,
 						   enum ath10k_fw_features feat)
 {
+	/* make sure that ath10k_core_fw_feature_str[] gets updated */
+	BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) !=
+		     ATH10K_FW_FEATURE_COUNT);
+
 	if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) ||
 	    WARN_ON(!ath10k_core_fw_feature_str[feat])) {
 		return scnprintf(buf, buf_len, "bit%d", feat);
@@ -1117,6 +1130,15 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 	ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
 	ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
 
+	if (rawmode) {
+		if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
+			      ar->fw_features)) {
+			ath10k_err(ar, "rawmode = 1 requires support from firmware");
+			return -EINVAL;
+		}
+		set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
+	}
+
 	if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
 		ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW;
 
@@ -1714,6 +1736,7 @@ void ath10k_core_destroy(struct ath10k *ar)
 	destroy_workqueue(ar->workqueue_aux);
 
 	ath10k_debug_destroy(ar);
+	ath10k_wmi_free_host_mem(ar);
 	ath10k_mac_destroy(ar);
 }
 EXPORT_SYMBOL(ath10k_core_destroy);

drivers/net/wireless/ath/ath10k/core.h

@@ -612,6 +612,11 @@ struct ath10k {
 
 		u32 channel_counters_freq_hz;
 
+		/* Mgmt tx descriptors threshold for limiting probe response
+		 * frames.
+		 */
+		u32 max_probe_resp_desc_thres;
+
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;

drivers/net/wireless/ath/ath10k/htt.h

@@ -1485,6 +1485,7 @@ struct ath10k_htt {
 	spinlock_t tx_lock;
 	int max_num_pending_tx;
 	int num_pending_tx;
+	int num_pending_mgmt_tx;
 	struct idr pending_tx;
 	wait_queue_head_t empty_tx_wq;
 	struct dma_pool *tx_pool;
@@ -1587,7 +1588,7 @@ int ath10k_htt_h2t_aggr_cfg_msg(struct ath10k_htt *htt,
 				u8 max_subfrms_ampdu,
 				u8 max_subfrms_amsdu);
 
-void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt);
+void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt, bool limit_mgmt_desc);
 int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt, struct sk_buff *skb);
 void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id);
 int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *);

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -643,13 +643,16 @@ struct amsdu_subframe_hdr {
 	__be16 len;
 } __packed;
 
+#define GROUP_ID_IS_SU_MIMO(x) ((x) == 0 || (x) == 63)
+
 static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 				  struct ieee80211_rx_status *status,
 				  struct htt_rx_desc *rxd)
 {
 	struct ieee80211_supported_band *sband;
 	u8 cck, rate, bw, sgi, mcs, nss;
 	u8 preamble = 0;
+	u8 group_id;
 	u32 info1, info2, info3;
 
 	info1 = __le32_to_cpu(rxd->ppdu_start.info1);
@@ -692,10 +695,50 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 	case HTT_RX_VHT_WITH_TXBF:
 		/* VHT-SIG-A1 in info2, VHT-SIG-A2 in info3
 		   TODO check this */
-		mcs = (info3 >> 4) & 0x0F;
-		nss = ((info2 >> 10) & 0x07) + 1;
 		bw = info2 & 3;
 		sgi = info3 & 1;
+		group_id = (info2 >> 4) & 0x3F;
+
+		if (GROUP_ID_IS_SU_MIMO(group_id)) {
+			mcs = (info3 >> 4) & 0x0F;
+			nss = ((info2 >> 10) & 0x07) + 1;
+		} else {
+			/* Hardware doesn't decode VHT-SIG-B into Rx descriptor
+			 * so it's impossible to decode MCS. Also since
+			 * firmware consumes Group Id Management frames host
+			 * has no knowledge regarding group/user position
+			 * mapping so it's impossible to pick the correct Nsts
+			 * from VHT-SIG-A1.
+			 *
+			 * Bandwidth and SGI are valid so report the rateinfo
+			 * on best-effort basis.
+			 */
+			mcs = 0;
+			nss = 1;
+		}
+
+		if (mcs > 0x09) {
+			ath10k_warn(ar, "invalid MCS received %u\n", mcs);
+			ath10k_warn(ar, "rxd %08x mpdu start %08x %08x msdu start %08x %08x ppdu start %08x %08x %08x %08x %08x\n",
+				    __le32_to_cpu(rxd->attention.flags),
+				    __le32_to_cpu(rxd->mpdu_start.info0),
+				    __le32_to_cpu(rxd->mpdu_start.info1),
+				    __le32_to_cpu(rxd->msdu_start.common.info0),
+				    __le32_to_cpu(rxd->msdu_start.common.info1),
+				    rxd->ppdu_start.info0,
+				    __le32_to_cpu(rxd->ppdu_start.info1),
+				    __le32_to_cpu(rxd->ppdu_start.info2),
+				    __le32_to_cpu(rxd->ppdu_start.info3),
+				    __le32_to_cpu(rxd->ppdu_start.info4));
+
+			ath10k_warn(ar, "msdu end %08x mpdu end %08x\n",
+				    __le32_to_cpu(rxd->msdu_end.common.info0),
+				    __le32_to_cpu(rxd->mpdu_end.info0));
+
+			ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL,
+					"rx desc msdu payload: ",
+					rxd->msdu_payload, 50);
+		}
 
 		status->rate_idx = mcs;
 		status->vht_nss = nss;

drivers/net/wireless/ath/ath10k/htt_tx.c

@@ -22,22 +22,28 @@
 #include "txrx.h"
 #include "debug.h"
 
-void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
+void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt, bool limit_mgmt_desc)
 {
+	if (limit_mgmt_desc)
+		htt->num_pending_mgmt_tx--;
+
 	htt->num_pending_tx--;
 	if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
 		ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
 }
 
-static void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
+static void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt,
+				      bool limit_mgmt_desc)
 {
 	spin_lock_bh(&htt->tx_lock);
-	__ath10k_htt_tx_dec_pending(htt);
+	__ath10k_htt_tx_dec_pending(htt, limit_mgmt_desc);
 	spin_unlock_bh(&htt->tx_lock);
 }
 
-static int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
+static int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt,
+				     bool limit_mgmt_desc, bool is_probe_resp)
 {
+	struct ath10k *ar = htt->ar;
 	int ret = 0;
 
 	spin_lock_bh(&htt->tx_lock);
@@ -47,6 +53,15 @@ static int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
 		goto exit;
 	}
 
+	if (limit_mgmt_desc) {
+		if (is_probe_resp && (htt->num_pending_mgmt_tx >
+		    ar->hw_params.max_probe_resp_desc_thres)) {
+			ret = -EBUSY;
+			goto exit;
+		}
+		htt->num_pending_mgmt_tx++;
+	}
+
 	htt->num_pending_tx++;
 	if (htt->num_pending_tx == htt->max_num_pending_tx)
 		ath10k_mac_tx_lock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
@@ -417,8 +432,19 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	int len = 0;
 	int msdu_id = -1;
 	int res;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+	bool limit_mgmt_desc = false;
+	bool is_probe_resp = false;
+
+	if (ar->hw_params.max_probe_resp_desc_thres) {
+		limit_mgmt_desc = true;
+
+		if (ieee80211_is_probe_resp(hdr->frame_control))
+			is_probe_resp = true;
+	}
+
+	res = ath10k_htt_tx_inc_pending(htt, limit_mgmt_desc, is_probe_resp);
 
-	res = ath10k_htt_tx_inc_pending(htt);
 	if (res)
 		goto err;
 
@@ -476,7 +502,7 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	ath10k_htt_tx_free_msdu_id(htt, msdu_id);
 	spin_unlock_bh(&htt->tx_lock);
 err_tx_dec:
-	ath10k_htt_tx_dec_pending(htt);
+	ath10k_htt_tx_dec_pending(htt, limit_mgmt_desc);
 err:
 	return res;
 }
@@ -498,8 +524,18 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	dma_addr_t paddr = 0;
 	u32 frags_paddr = 0;
 	struct htt_msdu_ext_desc *ext_desc = NULL;
+	bool limit_mgmt_desc = false;
+	bool is_probe_resp = false;
+
+	if (unlikely(ieee80211_is_mgmt(hdr->frame_control)) &&
+	    ar->hw_params.max_probe_resp_desc_thres) {
+		limit_mgmt_desc = true;
+
+		if (ieee80211_is_probe_resp(hdr->frame_control))
+			is_probe_resp = true;
+	}
 
-	res = ath10k_htt_tx_inc_pending(htt);
+	res = ath10k_htt_tx_inc_pending(htt, limit_mgmt_desc, is_probe_resp);
 	if (res)
 		goto err;
 
@@ -528,7 +564,8 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	     ieee80211_has_protected(hdr->frame_control)) {
 		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
 	} else if (!skb_cb->htt.nohwcrypt &&
-		   skb_cb->txmode == ATH10K_HW_TXRX_RAW) {
+		   skb_cb->txmode == ATH10K_HW_TXRX_RAW &&
+		   ieee80211_has_protected(hdr->frame_control)) {
 		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
 	}
 
@@ -678,7 +715,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	ath10k_htt_tx_free_msdu_id(htt, msdu_id);
 	spin_unlock_bh(&htt->tx_lock);
 err_tx_dec:
-	ath10k_htt_tx_dec_pending(htt);
+	ath10k_htt_tx_dec_pending(htt, limit_mgmt_desc);
 err:
 	return res;
 }

drivers/net/wireless/ath/ath10k/hw.h

@@ -413,16 +413,6 @@ enum ath10k_hw_rate_cck {
 /* Number of Copy Engines supported */
 #define CE_COUNT ar->hw_values->ce_count
 
-/*
- * Total number of PCIe MSI interrupts requested for all interrupt sources.
- * PCIe standard forces this to be a power of 2.
- * Some Host OS's limit MSI requests that can be granted to 8
- * so for now we abide by this limit and avoid requesting more
- * than that.
- */
-#define MSI_NUM_REQUEST_LOG2	3
-#define MSI_NUM_REQUEST		(1<<MSI_NUM_REQUEST_LOG2)
-
 /*
  * Granted MSIs are assigned as follows:
  * Firmware uses the first